The RFC Archive
 The RFC Archive   RFC 3733   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 3733

Extensible Provisioning Protocol (EPP) Contact Mapping

Last modified on Thursday, March 25th, 2004

Permanent link to RFC 3733
Search GitHub Wiki for RFC 3733
Show other RFCs mentioning RFC 3733







Network Working Group                                      S. Hollenbeck
Request for Comments: 3733                                VeriSign, Inc.
Category: Standards Track                                   March 2004


         Extensible Provisioning Protocol (EPP) Contact Mapping

 Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Copyright Notice

   Copyright © The Internet Society (2004).  All Rights Reserved.

 Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   mapping for the provisioning and management of individual or
   organizational social information identifiers (known as "contacts")
   stored in a shared central repository.  Specified in Extensible
   Markup Language (XML), the mapping defines EPP command syntax and
   semantics as applied to contacts.

 Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
       1.1.  Conventions Used In This Document. . . . . . . . . . . .  2
   2.  Object Attributes. . . . . . . . . . . . . . . . . . . . . . .  3
       2.1.  Contact and Client Identifiers . . . . . . . . . . . . .  3
       2.2.  Status Values. . . . . . . . . . . . . . . . . . . . . .  3
       2.3.  Individual and Organizational Names. . . . . . . . . . .  5
       2.4.  Address. . . . . . . . . . . . . . . . . . . . . . . . .  5
             2.4.1.  Street, City, and State or Province. . . . . . .  5
             2.4.2.  Postal Code. . . . . . . . . . . . . . . . . . .  5
             2.4.3.  Country. . . . . . . . . . . . . . . . . . . . .  5
       2.5.  Telephone Numbers. . . . . . . . . . . . . . . . . . . .  5
       2.6.  Email Addresses. . . . . . . . . . . . . . . . . . . . .  6
       2.7.  Dates and Times. . . . . . . . . . . . . . . . . . . . .  6
       2.8.  Authorization Information. . . . . . . . . . . . . . . .  6
       2.9.  Disclosure of Data Elements and Attributes . . . . . . .  6
   3.  EPP Command mapping. . . . . . . . . . . . . . . . . . . . . .  8
       3.1.  EPP Query Commands . . . . . . . . . . . . . . . . . . .  8
             3.1.1.  EPP <check> Command. . . . . . . . . . . . . . .  8



Hollenbeck                  Standards Track                  PAGE 1 top


RFC 3733 EPP Contact Mapping March 2004 3.1.2. EPP <info> Command . . . . . . . . . . . . . . . 10 3.1.3. EPP <transfer> Query Command . . . . . . . . . . 14 3.2. EPP Transform Commands . . . . . . . . . . . . . . . . . 16 3.2.1. EPP <create> Command . . . . . . . . . . . . . . 17 3.2.2. EPP <delete> Command . . . . . . . . . . . . . . 20 3.2.3. EPP <renew> Command . . . . . . . . . . . . . . 21 3.2.4. EPP <transfer> Command. . . . . . . . . . . . . 21 3.2.5. EPP <update> Command. . . . . . . . . . . . . . 23 3.2.6. Offline Review of Requested Actions. . . . . . . 26 4. Formal Syntax. . . . . . . . . . . . . . . . . . . . . . . . . 29 5. Internationalization Considerations . . . . . . . . . . . . . 37 6. IANA Considerations. . . . . . . . . . . . . . . . . . . . . . 38 7. Security Considerations. . . . . . . . . . . . . . . . . . . . 38 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 38 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 39 9.1. Normative References . . . . . . . . . . . . . . . . . . 39 9.2. Informative References . . . . . . . . . . . . . . . . . 39 10. Author's Address . . . . . . . . . . . . . . . . . . . . . . . 40 11. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 41 1. Introduction This document describes a personal and organizational identifier mapping for version 1.0 of the Extensible Provisioning Protocol (EPP). This mapping is specified using the Extensible Markup Language (XML) 1.0 as described in [XML] and XML Schema notation as described in [XMLS-1] and [XMLS-2]. [RFC 3730] provides a complete description of EPP command and response structures. A thorough understanding of the base protocol specification is necessary to understand the mapping described in this document. XML is case sensitive. Unless stated otherwise, XML specifications and examples provided in this document MUST be interpreted in the character case presented to develop a conforming implementation. 1.1. Conventions Used In This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC 2119]. In examples, "C:" represents lines sent by a protocol client and "S:" represents lines returned by a protocol server. Indentation and white space in examples is provided only to illustrate element relationships and is not a REQUIRED feature of this protocol. Hollenbeck Standards Track PAGE 2 top

RFC 3733 EPP Contact Mapping March 2004 2. Object Attributes An EPP contact object has attributes and associated values that can be viewed and modified by the sponsoring client or the server. This section describes each attribute type in detail. The formal syntax for the attribute values described here can be found in the "Formal Syntax" section of this document and in the appropriate normative references. 2.1. Contact and Client Identifiers All EPP contacts are identified by a server-unique identifier. Contact identifiers are character strings with a specified minimum length, a specified maximum length, and a specified format. Contact identifiers use the "clIDType" client identifier syntax described in [RFC 3730]. 2.2. Status Values A contact object MUST always have at least one associated status value. Status values can be set only by the client that sponsors a contact object and by the server on which the object resides. A client can change the status of a contact object using the EPP <update> command. Each status value MAY be accompanied by a string of human-readable text that describes the rationale for the status applied to the object. A client MUST NOT alter status values set by the server. A server MAY alter or override status values set by a client subject to local server policies. The status of an object MAY change as a result of either a client-initiated transform command or an action performed by a server operator. Status values that can be added or removed by a client are prefixed with "client". Corresponding status values that can be added or removed by a server are prefixed with "server". Status values that do not begin with either "client" or "server" are server-managed. Status Value Descriptions: - clientDeleteProhibited, serverDeleteProhibited Requests to delete the object MUST be rejected. - clientTransferProhibited, serverTransferProhibited Requests to transfer the object MUST be rejected. Hollenbeck Standards Track PAGE 3 top

RFC 3733 EPP Contact Mapping March 2004 - clientUpdateProhibited, serverUpdateProhibited Requests to update the object (other than to remove this status) MUST be rejected. - linked The contact object has at least one active association with another object, such as a domain object. Servers SHOULD provide services to determine existing object associations. - ok This is the normal status value for an object that has no pending operations or prohibitions. This value is set and removed by the server as other status values are added or removed. - pendingCreate, pendingDelete, pendingTransfer, pendingUpdate A transform command has been processed for the object, but the action has not been completed by the server. Server operators can delay action completion for a variety of reasons, such as to allow for human review or third-party action. A transform command that is processed, but whose requested action is pending, is noted with response code 1001. With one exception, transform commands MUST be rejected when a pendingCreate, pendingDelete, pendingTransfer, or pendingUpdate status is set. The only exception is that a <transfer> command to approve, reject, or cancel a transfer MAY be processed while an object is in "pendingTransfer" status. When the requested action has been completed, the pendingCreate, pendingDelete, pendingTransfer, or pendingUpdate status value MUST be removed. All clients involved in the transaction MUST be notified using a service message that the action has been completed and that the status of the object has changed. "ok" status MAY only be combined with "linked" status. "linked" status MAY be combined with any status. "pendingDelete" status MUST NOT be combined with either "clientDeleteProhibited" or "serverDeleteProhibited" status. "pendingTransfer" status MUST NOT be combined with either "clientTransferProhibited" or "serverTransferProhibited" status. Hollenbeck Standards Track PAGE 4 top

RFC 3733 EPP Contact Mapping March 2004 "pendingUpdate" status MUST NOT be combined with either "clientUpdateProhibited" or "serverUpdateProhibited" status. The pendingCreate, pendingDelete, pendingTransfer, and pendingUpdate status values MUST NOT be combined with each other. Other status combinations not expressly prohibited MAY be used. 2.3. Individual and Organizational Names Individual and organizational names associated with a contact are represented using character strings. These strings have a specified minimum length and a specified maximum length. Individual and organizational names MAY be provided in both UTF-8 [RFC 2279] and a subset of UTF-8 that can be represented in 7-bit ASCII depending on local needs. 2.4. Address Every contact has associated postal address information. A postal address contains OPTIONAL street information, city information, OPTIONAL state/province information, an OPTIONAL postal code, and a country identifier. Address information MAY be provided in both UTF-8 and a subset of UTF-8 that can be represented in 7-bit ASCII depending on local needs. 2.4.1. Street, City, and State or Province Contact street, city, and state or province information is represented using character strings. These strings have a specified minimum length and a specified maximum length. 2.4.2. Postal Code Contact postal codes are represented using character strings. These strings have a specified minimum length and a specified maximum length. 2.4.3. Country Contact country identifiers are represented using two-character identifiers specified in [ISO3166]. 2.5. Telephone Numbers Contact telephone number structure is derived from structures defined in [E164a]. Telephone numbers described in this mapping are character strings that MUST begin with a plus sign ("+", ASCII value Hollenbeck Standards Track PAGE 5 top

RFC 3733 EPP Contact Mapping March 2004 0x002B), followed by a country code defined in [E164b], followed by a dot (".", ASCII value 0x002E), followed by a sequence of digits representing the telephone number. An optional "x" attribute is provided to note telephone extension information. 2.6. Email Addresses Email address syntax is defined in [RFC 2822]. This mapping does not prescribe minimum or maximum lengths for character strings used to represent email addresses. 2.7. Dates and Times Date and time attribute values MUST be represented in Universal Coordinated Time (UTC) using the Gregorian calendar. The extended date-time form using upper case "T" and "Z" characters defined in [RFC 3339] MUST be used to represent date-time values as XML Schema does not support truncated date-time forms or lower case "T" and "Z" characters. 2.8. Authorization Information Authorization information is associated with contact objects to facilitate transfer operations. Authorization information is assigned when a contact object is created, and it might be updated in the future. This specification describes password-based authorization information, though other mechanisms are possible. 2.9. Disclosure of Data Elements and Attributes The EPP core protocol requires a server operator to announce data collection policies to clients; see section 2.4 of [RFC 3730]. In conjunction with this disclosure requirement, this mapping includes data elements that allow a client to identify elements that require exceptional server operator handling to allow or restrict disclosure to third parties. A server operator announces a default disclosure policy when establishing a session with a client. When an object is created or updated, the client can specify contact attributes that require exceptional disclosure handling using an OPTIONAL <contact:disclose> element. Once set, disclosure preferences can be reviewed using a contact information query. A server operator MUST reject any transaction that requests disclosure practices that do not conform to the announced data collection policy with a 2308 error response code. Hollenbeck Standards Track PAGE 6 top

RFC 3733 EPP Contact Mapping March 2004 If present, the <contact:disclose> element MUST contain a "flag" attribute. The "flag" attribute contains an XML Schema boolean value. A value of "true" or "1" (decimal one) notes a client preference to allow disclosure of the specified elements as an exception to the stated data collection policy. A value of "false" or "0" (decimal zero) notes a client preference to not allow disclosure of the specified elements as an exception to the stated data collection policy. The <contact:disclose> element MUST contain at least one of the following child elements: <contact:name type="int"> <contact:name type="loc"> <contact:org type="int"> <contact:org type="loc"> <contact:addr type="int"> <contact:addr type="loc"> <contact:voice> <contact:fax> <contact:email> Example <contact:disclose> element, flag="0": <contact:disclose flag="0"> <contact:email> <contact:voice> </contact:disclose> In this example, the contact email address and voice telephone number can not be disclosed. All other elements are subject to disclosure in accordance with the server's data collection policy. Example <contact:disclose> element, flag="1": <contact:disclose flag="1"> <contact:name type="int"> <contact:org type="int"> <contact:addr type="int"> </contact:disclose> In this example, the internationalized contact name, organization, and address information can be disclosed. All other elements are subject to disclosure in accordance with the server's data collection policy. Hollenbeck Standards Track PAGE 7 top

RFC 3733 EPP Contact Mapping March 2004 Client identification features provided by the EPP <login> command and contact authorization information are used to determine if a client is authorized to perform contact information query commands. These features also determine if a client is authorized to receive data that is otherwise marked for non-disclosure in a query response. 3. EPP Command mapping A detailed description of the EPP syntax and semantics can be found in [RFC 3730]. The command mappings described here are specifically for use in provisioning and managing contact objects via EPP. 3.1. EPP Query Commands EPP provides three commands to retrieve contact information: <check> to determine if a contact object can be provisioned within a repository, <info> to retrieve detailed information associated with a contact object, and <transfer> to retrieve contact object transfer status information. 3.1.1. EPP <check> Command The EPP <check> command is used to determine if an object can be provisioned within a repository. It provides a hint that allows a client to anticipate the success or failure of provisioning an object using the <create> command as object provisioning requirements are ultimately a matter of server policy. In addition to the standard EPP command elements, the <check> command MUST contain a <contact:check> element that identifies the contact namespace and the location of the contact schema. The <contact:check> element contains the following child elements: - One or more <contact:id> elements that contain the server-unique identifier of the contact objects to be queried. Example <check> command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> C: <check> C: <contact:check C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 Hollenbeck Standards Track PAGE 8 top

RFC 3733 EPP Contact Mapping March 2004 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:id>sah8013</contact:id> C: <contact:id>8013sah</contact:id> C: </contact:check> C: </check> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When a <check> command has been processed successfully, the EPP <resData> element MUST contain a child <contact:chkData> element that identifies the contact namespace and the location of the contact schema. The <contact:chkData> element contains one or more <contact:cd> elements that contain the following child elements: - A <contact:id> element that identifies the queried object. This element MUST contain an "avail" attribute whose value indicates object availability (can it be provisioned or not) at the moment the <check> command was completed. A value of "1" or "true" means that the object can be provisioned. A value of "0" or "false" means that the object can not be provisioned. - An OPTIONAL <contact:reason> element that MAY be provided when an object can not be provisioned. If present, this element contains server-specific text to help explain why the object can not be provisioned. This text MUST be represented in the response language previously negotiated with the client; an OPTIONAL "lang" attribute MAY be present to identify the language if the negotiated value is something other than the default value of "en" (English). Example <check> response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <contact:chkData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> Hollenbeck Standards Track PAGE 9 top

RFC 3733 EPP Contact Mapping March 2004 S: <contact:cd> S: <contact:id avail="1">sh8013</contact:id> S: </contact:cd> S: <contact:cd> S: <contact:id avail="0">sah8013</contact:id> S: <contact:reason>In use</contact:reason> S: </contact:cd> S: <contact:cd> S: <contact:id avail="1">8013sah</contact:id> S: </contact:cd> S: </contact:chkData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54322-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if a <check> command can not be processed for any reason. 3.1.2. EPP <info> Command The EPP <info> command is used to retrieve information associated with a contact object. In addition to the standard EPP command elements, the <info> command MUST contain a <contact:info> element that identifies the contact namespace and the location of the contact schema. The <contact:info> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object to be queried. - An OPTIONAL <contact:authInfo> element that contains authorization information associated with the contact object. If this element is not provided or if the authorization information is invalid, server policy determines if the command is rejected or if response information will be returned to the client. Example <info> command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> Hollenbeck Standards Track PAGE 10 top

RFC 3733 EPP Contact Mapping March 2004 C: <info> C: <contact:info C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:authInfo> C: <contact:pw>2fooBAR</contact:pw> C: </contact:authInfo> C: </contact:info> C: </info> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When an <info> command has been processed successfully, the EPP <resData> element MUST contain a child <contact:infData> element that identifies the contact namespace and the location of the contact schema. The <contact:infData> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object. - A <contact:roid> element that contains the Repository Object IDentifier assigned to the contact object when the object was created. - One or more <contact:status> elements that describe the status of the contact object. - One or two <contact:postalInfo> elements that contain postal address information. Two elements are provided so that address information can be provided in both internationalized and localized forms; a "type" attribute is used to identify the two forms. If an internationalized form (type="int") is provided, element content MUST be represented in a subset of UTF-8 that can be represented in the 7-bit US-ASCII character set. If a localized form (type="loc") is provided, element content MAY be represented in unrestricted UTF-8. The <contact:postalInfo> element contains the following child elements: - A <contact:name> element that contains the name of the individual or role represented by the contact. - An OPTIONAL <contact:org> element that contains the name of the organization with which the contact is affiliated. Hollenbeck Standards Track PAGE 11 top

RFC 3733 EPP Contact Mapping March 2004 - A <contact:addr> element that contains address information associated with the contact. A <contact:addr> element contains the following child elements: - One, two, or three OPTIONAL <contact:street> elements that contain the contact's street address. - A <contact:city> element that contains the contact's city. - An OPTIONAL <contact:sp> element that contains the contact's state or province. - An OPTIONAL <contact:pc> element that contains the contact's postal code. - A <contact:cc> element that contains the contact's country code. - An OPTIONAL <contact:voice> element that contains the contact's voice telephone number. - An OPTIONAL <contact:fax> element that contains the contact's facsimile telephone number. - A <contact:email> element that contains the contact's email address. - A <contact:clID> element that contains the identifier of the sponsoring client. - A <contact:crID> element that contains the identifier of the client that created the contact object. - A <contact:crDate> element that contains the date and time of contact object creation. - A <contact:upID> element that contains the identifier of the client that last updated the contact object. This element MUST NOT be present if the contact has never been modified. - A <contact:upDate> element that contains the date and time of the most recent contact object modification. This element MUST NOT be present if the contact object has never been modified. - A <contact:trDate> element that contains the date and time of the most recent successful contact object transfer. This element MUST NOT be provided if the contact object has never been transferred. Hollenbeck Standards Track PAGE 12 top

RFC 3733 EPP Contact Mapping March 2004 - A <contact:authInfo> element that contains authorization information associated with the contact object. This element MUST NOT be provided if the querying client is not the current sponsoring client. - An OPTIONAL <contact:disclose> element that identifies elements that require exceptional server operator handling to allow or restrict disclosure to third parties. See section 2.9. for a description of the child elements contained within the <contact:disclose> element. Example <info> response for an authorized client: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <contact:infData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> S: <contact:id>sh8013</contact:id> S: <contact:roid>SH8013-REP</contact:roid> S: <contact:status s="linked"/> S: <contact:status s="clientDeleteProhibited"/> S: <contact:postalInfo type="int"> S: <contact:name>John Doe</contact:name> S: <contact:org>Example Inc.</contact:org> S: <contact:addr> S: <contact:street>123 Example Dr.</contact:street> S: <contact:street>Suite 100</contact:street> S: <contact:city>Dulles</contact:city> S: <contact:sp>VA</contact:sp> S: <contact:pc>20166-6503</contact:pc> S: <contact:cc>US</contact:cc> S: </contact:addr> S: </contact:postalInfo> S: <contact:voice x="1234">+1.7035555555</contact:voice> S: <contact:fax>+1.7035555556</contact:fax> S: <contact:email>jdoe@example.com</contact:email> S: <contact:clID>ClientY</contact:clID> S: <contact:crID>ClientX</contact:crID> Hollenbeck Standards Track PAGE 13 top

RFC 3733 EPP Contact Mapping March 2004 S: <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate> S: <contact:upID>ClientX</contact:upID> S: <contact:upDate>1999-12-03T09:00:00.0Z</contact:upDate> S: <contact:trDate>2000-04-08T09:00:00.0Z</contact:trDate> S: <contact:authInfo> S: <contact:pw>2fooBAR</contact:pw> S: </contact:authInfo> S: <contact:disclose flag="0"> S: <contact:voice/> S: <contact:email/> S: </contact:disclose> S: </contact:infData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54322-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if an <info> command can not be processed for any reason. 3.1.3. EPP <transfer> Query Command The EPP <transfer> command provides a query operation that allows a client to determine real-time status of pending and completed transfer requests. In addition to the standard EPP command elements, the <transfer> command MUST contain an "op" attribute with value "query", and a <contact:transfer> element that identifies the contact namespace and the location of the contact schema. The <contact:transfer> element MUST contain the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object to be queried. - An OPTIONAL <contact:authInfo> element that contains authorization information associated with the contact object. If this element is not provided or if the authorization information is invalid, server policy determines whether the command is rejected or the response information will be returned to the client. Example <transfer> query command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 Hollenbeck Standards Track PAGE 14 top

RFC 3733 EPP Contact Mapping March 2004 C: epp-1.0.xsd"> C: <command> C: <transfer op="query"> C: <contact:transfer C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:authInfo> C: <contact:pw>2fooBAR</contact:pw> C: </contact:authInfo> C: </contact:transfer> C: </transfer> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When a <transfer> query command has been processed successfully, the EPP <resData> element MUST contain a child <contact:trnData> element that identifies the contact namespace and the location of the contact schema. The <contact:trnData> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier for the queried contact. - A <contact:trStatus> element that contains the state of the most recent transfer request. - A <contact:reID> element that contains the identifier of the client that requested the object transfer. - A <contact:reDate> element that contains the date and time that the transfer was requested. - A <contact:acID> element that contains the identifier of the client that SHOULD act upon the transfer request. - A <contact:acDate> element that contains the date and time of a required or completed response. For a pending request, the value identifies the date and time by which a response is required before an automated response action SHOULD be taken by the server. For all other status types, the value identifies the date and time when the request was completed. Hollenbeck Standards Track PAGE 15 top

RFC 3733 EPP Contact Mapping March 2004 Example <transfer> query response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <contact:trnData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> S: <contact:id>sh8013</contact:id> S: <contact:trStatus>pending</contact:trStatus> S: <contact:reID>ClientX</contact:reID> S: <contact:reDate>2000-06-06T22:00:00.0Z</contact:reDate> S: <contact:acID>ClientY</contact:acID> S: <contact:acDate>2000-06-11T22:00:00.0Z</contact:acDate> S: </contact:trnData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54322-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if a <transfer> query command can not be processed for any reason. 3.2. EPP Transform Commands EPP provides four commands to transform contact object information: <create> to create an instance of a contact object, <delete> to delete an instance of a contact object, <transfer> to manage contact object sponsorship changes, and <update> to change information associated with a contact object. This document does not define a mapping for the EPP <renew> command. Transform commands are typically processed and completed in real time. Server operators MAY receive and process transform commands, but defer completing the requested action if human or third-party review is required before the requested action can be completed. In such situations the server MUST return a 1001 response code to the Hollenbeck Standards Track PAGE 16 top

RFC 3733 EPP Contact Mapping March 2004 client to note that the command has been received and processed, but the requested action is pending. The server MUST also manage the status of the object that is the subject of the command to reflect the initiation and completion of the requested action. Once the action has been completed, all clients involved in the transaction MUST be notified using a service message that the action has been completed and that the status of the object has changed. 3.2.1. EPP <create> Command The EPP <create> command provides a transform operation that allows a client to create a contact object. In addition to the standard EPP command elements, the <create> command MUST contain a <contact:create> element that identifies the contact namespace and the location of the contact schema. The <contact:create> element contains the following child elements: - A <contact:id> element that contains the desired server-unique identifier for the contact to be created. - One or two <contact:postalInfo> elements that contain postal address information. Two elements are provided so that address information can be provided in both internationalized and localized forms; a "type" attribute is used to identify the two forms. If an internationalized form (type="int") is provided, element content MUST be represented in a subset of UTF-8 that can be represented in the 7-bit US-ASCII character set. If a localized form (type="loc") is provided, element content MAY be represented in unrestricted UTF-8. The <contact:postalInfo> element contains the following child elements: - A <contact:name> element that contains the name of the individual or role represented by the contact. - An OPTIONAL <contact:org> element that contains the name of the organization with which the contact is affiliated. - A <contact:addr> element that contains address information associated with the contact. A <contact:addr> element contains the following child elements: - One, two, or three OPTIONAL <contact:street> elements that contain the contact's street address. - A <contact:city> element that contains the contact's city. - An OPTIONAL <contact:sp> element that contains the contact's state or province. Hollenbeck Standards Track PAGE 17 top

RFC 3733 EPP Contact Mapping March 2004 - An OPTIONAL <contact:pc> element that contains the contact's postal code. - A <contact:cc> element that contains the contact's country code. - An OPTIONAL <contact:voice> element that contains the contact's voice telephone number. - An OPTIONAL <contact:fax> element that contains the contact's facsimile telephone number. - A <contact:email> element that contains the contact's email address. - A <contact:authInfo> element that contains authorization information to be associated with the contact object. This mapping includes a password-based authentication mechanism, but the schema allows new mechanisms to be defined in new schemas. - An OPTIONAL <contact:disclose> element that allows a client to identify elements that require exceptional server operator handling to allow or restrict disclosure to third parties. See section 2.9 for a description of the child elements contained within the <contact:disclose> element. Example <create> command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> C: <create> C: <contact:create C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:postalInfo type="int"> C: <contact:name>John Doe</contact:name> C: <contact:org>Example Inc.</contact:org> C: <contact:addr> C: <contact:street>123 Example Dr.</contact:street> C: <contact:street>Suite 100</contact:street> C: <contact:city>Dulles</contact:city> C: <contact:sp>VA</contact:sp> Hollenbeck Standards Track PAGE 18 top

RFC 3733 EPP Contact Mapping March 2004 C: <contact:pc>20166-6503</contact:pc> C: <contact:cc>US</contact:cc> C: </contact:addr> C: </contact:postalInfo> C: <contact:voice x="1234">+1.7035555555</contact:voice> C: <contact:fax>+1.7035555556</contact:fax> C: <contact:email>jdoe@example.com</contact:email> C: <contact:authInfo> C: <contact:pw>2fooBAR</contact:pw> C: </contact:authInfo> C: <contact:disclose flag="0"> C: <contact:voice/> C: <contact:email/> C: </contact:disclose> C: </contact:create> C: </create> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When a <create> command has been processed successfully, the EPP <resData> element MUST contain a child <contact:creData> element that identifies the contact namespace and the location of the contact schema. The <contact:creData> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier for the created contact. - A <contact:crDate> element that contains the date and time of contact object creation. Example <create> response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <contact:creData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> Hollenbeck Standards Track PAGE 19 top

RFC 3733 EPP Contact Mapping March 2004 S: <contact:id>sh8013</contact:id> S: <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate> S: </contact:creData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if a <create> command can not be processed for any reason. 3.2.2. EPP <delete> Command The EPP <delete> command provides a transform operation that allows a client to delete a contact object. In addition to the standard EPP command elements, the <delete> command MUST contain a <contact:delete> element that identifies the contact namespace and the location of the contact schema. The <contact:delete> element MUST contain the following child element: - A <contact:id> element that contains the server-unique identifier of the contact object to be deleted. A contact object SHOULD NOT be deleted if it is associated with other known objects. An associated contact SHOULD NOT be deleted until associations with other known objects have been broken. A server SHOULD notify clients of object relationships when a <delete> command is attempted and fails due to existing object relationships. Example <delete> command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> C: <delete> C: <contact:delete C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: </contact:delete> Hollenbeck Standards Track PAGE 20 top

RFC 3733 EPP Contact Mapping March 2004 C: </delete> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When a <delete> command has been processed successfully, a server MUST respond with an EPP response with no <resData> element. Example <delete> response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if a <delete> command can not be processed for any reason. 3.2.3. EPP <renew> Command Renewal semantics do not apply to contact objects, so there is no mapping defined for the EPP <renew> command. 3.2.4. EPP <transfer> Command The EPP <transfer> command provides a transform operation that allows a client to manage requests to transfer the sponsorship of a contact object. In addition to the standard EPP command elements, the <transfer> command MUST contain a <contact:transfer> element that identifies the contact namespace and the location of the contact schema. The <contact:transfer> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object for which a transfer request is to be created, approved, rejected, or cancelled. Hollenbeck Standards Track PAGE 21 top

RFC 3733 EPP Contact Mapping March 2004 - A <contact:authInfo> element that contains authorization information associated with the contact object. Every EPP <transfer> command MUST contain an "op" attribute that identifies the transfer operation to be performed as defined in [RFC 3730]. Example <transfer> request command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> C: <transfer op="request"> C: <contact:transfer C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:authInfo> C: <contact:pw>2fooBAR</contact:pw> C: </contact:authInfo> C: </contact:transfer> C: </transfer> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When a <transfer> command has been processed successfully, the EPP <resData> element MUST contain a child <contact:trnData> element that identifies the contact namespace and the location of the contact schema. The <contact:trnData> element contains the same child elements defined for a transfer query response. Example <transfer> response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> Hollenbeck Standards Track PAGE 22 top

RFC 3733 EPP Contact Mapping March 2004 S: <contact:trnData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> S: <contact:id>sh8013</contact:id> S: <contact:trStatus>pending</contact:trStatus> S: <contact:reID>ClientX</contact:reID> S: <contact:reDate>2000-06-08T22:00:00.0Z</contact:reDate> S: <contact:acID>ClientY</contact:acID> S: <contact:acDate>2000-06-13T22:00:00.0Z</contact:acDate> S: </contact:trnData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54322-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if a <transfer> command can not be processed for any reason. 3.2.5. EPP <update> Command The EPP <update> command provides a transform operation that allows a client to modify the attributes of a contact object. In addition to the standard EPP command elements, the <update> command MUST contain a <contact:update> element that identifies the contact namespace and the location of the contact schema. The <contact:update> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object to be updated. - An OPTIONAL <contact:add> element that contains attribute values to be added to the object. - An OPTIONAL <contact:rem> element that contains attribute values to be removed from the object. - An OPTIONAL <contact:chg> element that contains object attribute values to be changed. At least one <contact:add>, <contact:rem>, or <contact:chg> element MUST be provided. The <contact:add> and <contact:rem> elements contain the following child elements: Hollenbeck Standards Track PAGE 23 top

RFC 3733 EPP Contact Mapping March 2004 - One or more <contact:status> elements that contain status values to be associated with or removed from the object. When specifying a value to be removed, only the attribute value is significant; element text is not required to match a value for removal. A <contact:chg> element contains the following OPTIONAL child elements. At least one child element MUST be present: - One or two <contact:postalInfo> elements that contain postal address information. Two elements are provided so that address information can be provided in both internationalized and localized forms; a "type" attribute is used to identify the two forms. If an internationalized form (type="int") is provided, element content MUST be represented in a subset of UTF-8 that can be represented in the 7-bit US-ASCII character set. If a localized form (type="loc") is provided, element content MAY be represented in unrestricted UTF-8. The <contact:postalInfo> element contains the following OPTIONAL child elements: - A <contact:name> element that contains the name of the individual or role represented by the contact. - A <contact:org> element that contains the name of the organization with which the contact is affiliated. - A <contact:addr> element that contains address information associated with the contact. A <contact:addr> element contains the following child elements: - One, two, or three OPTIONAL <contact:street> elements that contain the contact's street address. - A <contact:city> element that contains the contact's city. - An OPTIONAL <contact:sp> element that contains the contact's state or province. - An OPTIONAL <contact:pc> element that contains the contact's postal code. - A <contact:cc> element that contains the contact's country code. - A <contact:voice> element that contains the contact's voice telephone number. Hollenbeck Standards Track PAGE 24 top

RFC 3733 EPP Contact Mapping March 2004 - A <contact:fax> element that contains the contact's facsimile telephone number. - A <contact:email> element that contains the contact's email address. - A <contact:authInfo> element that contains authorization information associated with the contact object. This mapping includes a password-based authentication mechanism, but the schema allows new mechanisms to be defined in new schemas. - A <contact:disclose> element that allows a client to identify elements that require exceptional server operator handling to allow or restrict disclosure to third parties. See section 2.9. for a description of the child elements contained within the <contact:disclose> element. Example <update> command: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" C: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 C: epp-1.0.xsd"> C: <command> C: <update> C: <contact:update C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" C: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 C: contact-1.0.xsd"> C: <contact:id>sh8013</contact:id> C: <contact:add> C: <contact:status s="clientDeleteProhibited"/> C: </contact:add> C: <contact:chg> C: <contact:postalInfo type="int"> C: <contact:org/> C: <contact:addr> C: <contact:street>124 Example Dr.</contact:street> C: <contact:street>Suite 200</contact:street> C: <contact:city>Dulles</contact:city> C: <contact:sp>VA</contact:sp> C: <contact:pc>20166-6503</contact:pc> C: <contact:cc>US</contact:cc> C: </contact:addr> C: </contact:postalInfo> C: <contact:voice>+1.7034444444</contact:voice> C: <contact:fax/> Hollenbeck Standards Track PAGE 25 top

RFC 3733 EPP Contact Mapping March 2004 C: <contact:authInfo> C: <contact:pw>2fooBAR</contact:pw> C: </contact:authInfo> C: <contact:disclose flag="1"> C: <contact:voice/> C: <contact:email/> C: </contact:disclose> C: </contact:chg> C: </contact:update> C: </update> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> When an <update> command has been processed successfully, a server MUST respond with an EPP response with no <resData> element. Example <update> response: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> An EPP error response MUST be returned if an <update> command can not be processed for any reason. 3.2.6. Offline Review of Requested Actions Commands are processed by a server in the order they are received from a client. Though an immediate response confirming receipt and processing of the command is produced by the server, a server operator MAY perform an offline review of requested transform commands before completing the requested action. In such situations, the response from the server MUST clearly note that the transform command has been received and processed, but the requested action is pending. The status of the corresponding object MUST clearly reflect Hollenbeck Standards Track PAGE 26 top

RFC 3733 EPP Contact Mapping March 2004 processing of the pending action. The server MUST notify the client when offline processing of the action has been completed. Examples describing a <create> command that requires offline review are included here. Note the result code and message returned in response to the <create> command. S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1001"> S: <msg>Command completed successfully; action pending</msg> S: </result> S: <resData> S: <contact:creData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> S: <contact:id>sh8013</contact:id> S: <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate> S: </contact:creData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </trID> S: </response> S:</epp> The status of the contact object after returning this response MUST include "pendingCreate". The server operator reviews the request offline, and informs the client of the outcome of the review by queuing a service message for retrieval via the <poll> command. The service message MUST contain text in the <response>, <msgQ>, <msg> element that describes the notification. In addition, the EPP <resData> element MUST contain a child <contact:panData> element that identifies the contact namespace and the location of the contact schema. The <contact:panData> element contains the following child elements: - A <contact:id> element that contains the server-unique identifier of the contact object. The <contact:id> element contains a REQUIRED "paResult" attribute. A positive boolean value indicates that the request has been approved and completed. A negative Hollenbeck Standards Track PAGE 27 top

RFC 3733 EPP Contact Mapping March 2004 boolean value indicates that the request has been denied and the requested action has not been taken. - A <contact:paTRID> element that contains the client transaction identifier and server transaction identifier returned with the original response to process the command. The client transaction identifier is OPTIONAL and will only be returned if the client provided an identifier with the original <create> command. - A <contact:paDate> element that contains the date and time describing when review of the requested action was completed. Example "review completed" service message: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0" S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" S: xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0 S: epp-1.0.xsd"> S: <response> S: <result code="1301"> S: <msg>Command completed successfully; ack to dequeue</msg> S: </result> S: <msgQ count="5" id="12345"> S: <qDate>1999-04-04T22:01:00.0Z</qDate> S: <msg>Pending action completed successfully.</msg> S: </msgQ> S: <resData> S: <contact:panData S: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" S: xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0 S: contact-1.0.xsd"> S: <contact:id paResult="1">sh8013</contact:id> S: <contact:paTRID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54321-XYZ</svTRID> S: </contact:paTRID> S: <contact:paDate>1999-04-04T22:00:00.0Z</contact:paDate> S: </contact:panData> S: </resData> S: <trID> S: <clTRID>BCD-23456</clTRID> S: <svTRID>65432-WXY</svTRID> S: </trID> S: </response> S:</epp> Hollenbeck Standards Track PAGE 28 top

RFC 3733 EPP Contact Mapping March 2004 4. Formal Syntax An EPP object mapping is specified in XML Schema notation. The formal syntax presented here is a complete schema representation of the object mapping suitable for automated validation of EPP XML instances. The BEGIN and END tags are not part of the schema; they are used to note the beginning and ending of the schema for URI registration purposes. BEGIN <?xml version="1.0" encoding="UTF-8"?> <schema targetNamespace="urn:ietf:params:xml:ns:contact-1.0" xmlns:contact="urn:ietf:params:xml:ns:contact-1.0" xmlns:epp="urn:ietf:params:xml:ns:epp-1.0" xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0" xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <!-- Import common element types. --> <import namespace="urn:ietf:params:xml:ns:eppcom-1.0" schemaLocation="eppcom-1.0.xsd"/> <import namespace="urn:ietf:params:xml:ns:epp-1.0" schemaLocation="epp-1.0.xsd"/> <annotation> <documentation> Extensible Provisioning Protocol v1.0 contact provisioning schema. </documentation> </annotation> <!-- Child elements found in EPP commands. --> <element name="check" type="contact:mIDType"/> <element name="create" type="contact:createType"/> <element name="delete" type="contact:sIDType"/> <element name="info" type="contact:authIDType"/> <element name="transfer" type="contact:authIDType"/> <element name="update" type="contact:updateType"/> <!-- Utility types. --> <simpleType name="ccType"> Hollenbeck Standards Track PAGE 29 top

RFC 3733 EPP Contact Mapping March 2004 <restriction base="token"> <length value="2"/> </restriction> </simpleType> <complexType name="e164Type"> <simpleContent> <extension base="contact:e164StringType"> <attribute name="x" type="token"/> </extension> </simpleContent> </complexType> <simpleType name="e164StringType"> <restriction base="token"> <pattern value="(\+[0-9]{1,3}\.[0-9]{1,14})?"/> <maxLength value="17"/> </restriction> </simpleType> <simpleType name="pcType"> <restriction base="token"> <maxLength value="16"/> </restriction> </simpleType> <simpleType name="postalLineType"> <restriction base="normalizedString"> <minLength value="1"/> <maxLength value="255"/> </restriction> </simpleType> <simpleType name="optPostalLineType"> <restriction base="normalizedString"> <maxLength value="255"/> </restriction> </simpleType> <!-- Child elements of the <create> command. --> <complexType name="createType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="postalInfo" type="contact:postalInfoType" maxOccurs="2"/> <element name="voice" type="contact:e164Type" Hollenbeck Standards Track PAGE 30 top

RFC 3733 EPP Contact Mapping March 2004 minOccurs="0"/> <element name="fax" type="contact:e164Type" minOccurs="0"/> <element name="email" type="eppcom:minTokenType"/> <element name="authInfo" type="contact:authInfoType"/> <element name="disclose" type="contact:discloseType" minOccurs="0"/> </sequence> </complexType> <complexType name="postalInfoType"> <sequence> <element name="name" type="contact:postalLineType"/> <element name="org" type="contact:optPostalLineType" minOccurs="0"/> <element name="addr" type="contact:addrType"/> </sequence> <attribute name="type" type="contact:postalInfoEnumType" use="required"/> </complexType> <simpleType name="postalInfoEnumType"> <restriction base="token"> <enumeration value="loc"/> <enumeration value="int"/> </restriction> </simpleType> <complexType name="addrType"> <sequence> <element name="street" type="contact:optPostalLineType" minOccurs="0" maxOccurs="3"/> <element name="city" type="contact:postalLineType"/> <element name="sp" type="contact:optPostalLineType" minOccurs="0"/> <element name="pc" type="contact:pcType" minOccurs="0"/> <element name="cc" type="contact:ccType"/> </sequence> </complexType> <complexType name="authInfoType"> <choice> <element name="pw" type="eppcom:pwAuthInfoType"/> <element name="ext" type="eppcom:extAuthInfoType"/> </choice> </complexType> Hollenbeck Standards Track PAGE 31 top

RFC 3733 EPP Contact Mapping March 2004 <complexType name="discloseType"> <sequence> <element name="name" type="contact:intLocType" minOccurs="0" maxOccurs="2"/> <element name="org" type="contact:intLocType" minOccurs="0" maxOccurs="2"/> <element name="addr" type="contact:intLocType" minOccurs="0" maxOccurs="2"/> <element name="voice" minOccurs="0"/> <element name="fax" minOccurs="0"/> <element name="email" minOccurs="0"/> </sequence> <attribute name="flag" type="boolean" use="required"/> </complexType> <complexType name="intLocType"> <attribute name="type" type="contact:postalInfoEnumType" use="required"/> </complexType> <!-- Child element of commands that require only an identifier. --> <complexType name="sIDType"> <sequence> <element name="id" type="eppcom:clIDType"/> </sequence> </complexType> <!-- Child element of commands that accept multiple identifiers. --> <complexType name="mIDType"> <sequence> <element name="id" type="eppcom:clIDType" maxOccurs="unbounded"/> </sequence> </complexType> <!-- Child elements of the <info> and <transfer> commands. --> <complexType name="authIDType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="authInfo" type="contact:authInfoType" minOccurs="0"/> </sequence> Hollenbeck Standards Track PAGE 32 top

RFC 3733 EPP Contact Mapping March 2004 </complexType> <!-- Child elements of the <update> command. --> <complexType name="updateType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="add" type="contact:addRemType" minOccurs="0"/> <element name="rem" type="contact:addRemType" minOccurs="0"/> <element name="chg" type="contact:chgType" minOccurs="0"/> </sequence> </complexType> <!-- Data elements that can be added or removed. --> <complexType name="addRemType"> <sequence> <element name="status" type="contact:statusType" maxOccurs="7"/> </sequence> </complexType> <!-- Data elements that can be changed. --> <complexType name="chgType"> <sequence> <element name="postalInfo" type="contact:chgPostalInfoType" minOccurs="0" maxOccurs="2"/> <element name="voice" type="contact:e164Type" minOccurs="0"/> <element name="fax" type="contact:e164Type" minOccurs="0"/> <element name="email" type="eppcom:minTokenType" minOccurs="0"/> <element name="authInfo" type="contact:authInfoType" minOccurs="0"/> <element name="disclose" type="contact:discloseType" minOccurs="0"/> </sequence> </complexType> <complexType name="chgPostalInfoType"> Hollenbeck Standards Track PAGE 33 top

RFC 3733 EPP Contact Mapping March 2004 <sequence> <element name="name" type="contact:postalLineType" minOccurs="0"/> <element name="org" type="contact:optPostalLineType" minOccurs="0"/> <element name="addr" type="contact:addrType" minOccurs="0"/> </sequence> <attribute name="type" type="contact:postalInfoEnumType" use="required"/> </complexType> <!-- Child response elements. --> <element name="chkData" type="contact:chkDataType"/> <element name="creData" type="contact:creDataType"/> <element name="infData" type="contact:infDataType"/> <element name="panData" type="contact:panDataType"/> <element name="trnData" type="contact:trnDataType"/> <!-- <check> response elements. --> <complexType name="chkDataType"> <sequence> <element name="cd" type="contact:checkType" maxOccurs="unbounded"/> </sequence> </complexType> <complexType name="checkType"> <sequence> <element name="id" type="contact:checkIDType"/> <element name="reason" type="eppcom:reasonType" minOccurs="0"/> </sequence> </complexType> <complexType name="checkIDType"> <simpleContent> <extension base="eppcom:clIDType"> <attribute name="avail" type="boolean" use="required"/> </extension> </simpleContent> </complexType> Hollenbeck Standards Track PAGE 34 top

RFC 3733 EPP Contact Mapping March 2004 <!-- <create> response elements. --> <complexType name="creDataType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="crDate" type="dateTime"/> </sequence> </complexType> <!-- <info> response elements. --> <complexType name="infDataType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="roid" type="eppcom:roidType"/> <element name="status" type="contact:statusType" maxOccurs="7"/> <element name="postalInfo" type="contact:postalInfoType" maxOccurs="2"/> <element name="voice" type="contact:e164Type" minOccurs="0"/> <element name="fax" type="contact:e164Type" minOccurs="0"/> <element name="email" type="eppcom:minTokenType"/> <element name="clID" type="eppcom:clIDType"/> <element name="crID" type="eppcom:clIDType"/> <element name="crDate" type="dateTime"/> <element name="upID" type="eppcom:clIDType" minOccurs="0"/> <element name="upDate" type="dateTime" minOccurs="0"/> <element name="trDate" type="dateTime" minOccurs="0"/> <element name="authInfo" type="contact:authInfoType" minOccurs="0"/> <element name="disclose" type="contact:discloseType" minOccurs="0"/> </sequence> </complexType> <!-- Status is a combination of attributes and an optional human-readable message that may be expressed in languages other than English. --> <complexType name="statusType"> <simpleContent> Hollenbeck Standards Track PAGE 35 top

RFC 3733 EPP Contact Mapping March 2004 <extension base="normalizedString"> <attribute name="s" type="contact:statusValueType" use="required"/> <attribute name="lang" type="language" default="en"/> </extension> </simpleContent> </complexType> <simpleType name="statusValueType"> <restriction base="token"> <enumeration value="clientDeleteProhibited"/> <enumeration value="clientTransferProhibited"/> <enumeration value="clientUpdateProhibited"/> <enumeration value="linked"/> <enumeration value="ok"/> <enumeration value="pendingCreate"/> <enumeration value="pendingDelete"/> <enumeration value="pendingTransfer"/> <enumeration value="pendingUpdate"/> <enumeration value="serverDeleteProhibited"/> <enumeration value="serverTransferProhibited"/> <enumeration value="serverUpdateProhibited"/> </restriction> </simpleType> <!-- Pending action notification response elements. --> <complexType name="panDataType"> <sequence> <element name="id" type="contact:paCLIDType"/> <element name="paTRID" type="epp:trIDType"/> <element name="paDate" type="dateTime"/> </sequence> </complexType> <complexType name="paCLIDType"> <simpleContent> <extension base="eppcom:clIDType"> <attribute name="paResult" type="boolean" use="required"/> </extension> </simpleContent> </complexType> <!-- <transfer> response elements. Hollenbeck Standards Track PAGE 36 top

RFC 3733 EPP Contact Mapping March 2004 --> <complexType name="trnDataType"> <sequence> <element name="id" type="eppcom:clIDType"/> <element name="trStatus" type="eppcom:trStatusType"/> <element name="reID" type="eppcom:clIDType"/> <element name="reDate" type="dateTime"/> <element name="acID" type="eppcom:clIDType"/> <element name="acDate" type="dateTime"/> </sequence> </complexType> <!-- End of schema. --> </schema> END 5. Internationalization Considerations EPP is represented in XML, which provides native support for encoding information using the Unicode character set and its more compact representations, including UTF-8. Conformant XML processors recognize both UTF-8 and UTF-16 [RFC 2781]. Though XML includes provisions to identify and use other character encodings through use of an "encoding" attribute in an <?xml?> declaration, use of UTF-8 is RECOMMENDED in environments where parser encoding support incompatibility exists. All date-time values presented via EPP MUST be expressed in Universal Coordinated Time using the Gregorian calendar. The XML Schema allows use of time zone identifiers to indicate offsets from the zero meridian, but this option MUST NOT be used with EPP. The extended date-time form using upper case "T" and "Z" characters defined in [RFC 3339] MUST be used to represent date-time values as the XML Schema does not support truncated date-time forms or lower case "T" and "Z" characters. Humans, organizations, and other entities often need to represent social information in both a commonly understood character set and a locally optimized character set. This specification provides features allowing representation of social information in both a subset of UTF-8 for broad readability and unrestricted UTF-8 for local optimization. Hollenbeck Standards Track PAGE 37 top

RFC 3733 EPP Contact Mapping March 2004 6. IANA Considerations This document uses URNs to describe XML namespaces and XML schemas conforming to a registry mechanism described in [RFC 3688]. Two URI assignments have been registered by the IANA. Registration request for the contact namespace: URI: urn:ietf:params:xml:ns:contact-1.0 Registrant Contact: See the "Author's Address" section of this document. XML: None. Namespace URIs do not represent an XML specification. Registration request for the contact XML schema: URI: urn:ietf:params:xml:schema:contact-1.0 Registrant Contact: See the "Author's Address" section of this document. XML: See the "Formal Syntax" section of this document. 7. Security Considerations Authorization information as described in section 2.8. is REQUIRED to create a contact object. This information is used in some query and transfer operations as an additional means of determining client authorization to perform the command. Failure to protect authorization information from inadvertent disclosure can result in unauthorized transfer operations and unauthorized information release. Both client and server MUST ensure that authorization information is stored and exchanged with high-grade encryption mechanisms to provide privacy services. The object mapping described in this document does not provide any other security services or introduce any additional considerations beyond those described by [RFC 3730] and protocol layers used by EPP. 8. Acknowledgements This document was originally written as an individual submission Internet-Draft. The provreg working group later adopted it as a working group document and provided many invaluable comments and suggested improvements. The author wishes to acknowledge the efforts of WG chairs Edward Lewis and Jaap Akkerhuis for their process and editorial contributions. Hollenbeck Standards Track PAGE 38 top

RFC 3733 EPP Contact Mapping March 2004 Specific suggestions that have been incorporated into this document were provided by Chris Bason, Eric Brunner-Williams, Jordyn Buchanan, Robert Burbidge, Dave Crocker, Ayesha Damaraju, Anthony Eden, Sheer El-Showk, Dipankar Ghosh, Klaus Malorny, Dan Manley, Michael Mealling, Patrick Mevzek, Asbjorn Steira, and Rick Wesson. 9. References 9.1. Normative References [ISO3166] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions - Part 1: Country codes", October 1997. [RFC 2119] Bradner, S., "Key Words for Use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC 2279] Yergeau, F., "UTF-8, a transformation format of ISO 10646", RFC 2279, January 1998. [RFC 2822] Resnick, P., "Internet Message Format", RFC 2822, April 2001. [RFC 3339] Klyne, G. and C. Newman: "Date and Time on the Internet: Timestamps", RFC 3339, July 2002. [RFC 3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC 3730] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)", RFC 3730, March 2004. [XML] Editor T. Bray et al.: "Extensible Markup Language (XML) 1.0 (Second Edition)", W3C Recommendation 6 October 2000. [XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures", W3C Recommendation 2 May 2001. [XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2: Datatypes", W3C Recommendation 2 May 2001. 9.2. Informative References [RFC 2781] Hoffman, P. and F. Yergeau, "UTF-16, an encoding of ISO 10646", RFC 2781, February 2000. [E164a] ITU-T Recommendation E.164: "The International Public Telecommunication Numbering Plan", May 1997. Hollenbeck Standards Track PAGE 39 top

RFC 3733 EPP Contact Mapping March 2004 [E164b] Complement To ITU-T Recommendation E.164 (05/1997): "List of ITU-T Recommendation E.164 assigned country codes", June 2000. 10. Author's Address Scott Hollenbeck VeriSign Global Registry Services 21345 Ridgetop Circle Dulles, VA 20166-6503 USA EMail: shollenbeck@verisign.com Hollenbeck Standards Track PAGE 40 top

RFC 3733 EPP Contact Mapping March 2004 11. Full Copyright Statement Copyright © The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78 and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Hollenbeck Standards Track PAGE 41 top

Extensible Provisioning Protocol (EPP) Contact Mapping RFC TOTAL SIZE: 83091 bytes PUBLICATION DATE: Thursday, March 25th, 2004 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 3733: The IETF Trust, Thursday, March 25th, 2004
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement