The RFC Archive
 The RFC Archive   RFC 5008   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 5008

Suite B in Secure/Multipurpose Internet Mail Extensions (S/MIME)

Last modified on Thursday, September 13th, 2007

Permanent link to RFC 5008
Search GitHub Wiki for RFC 5008
Show other RFCs mentioning RFC 5008







Network Working Group                                         R. Housley
Request for Comments: 5008                                Vigil Security
Category: Informational                                     J. Solinas
                                                                     NSA
                                                           September 2007


    Suite B in Secure/Multipurpose Internet Mail Extensions (S/MIME)

 Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

 Abstract

   This document specifies the conventions for using the United States
   National Security Agency's Suite B algorithms in Secure/Multipurpose
   Internet Mail Extensions (S/MIME) as specified in RFC 3851.

1.  Introduction

   This document specifies the conventions for using the United States
   National Security Agency's Suite B algorithms [SuiteB] in
   Secure/Multipurpose Internet Mail Extensions (S/MIME) [MSG].  S/MIME
   makes use of the Cryptographic Message Syntax (CMS) [CMS].  In
   particular, the signed-data and the enveloped-data content types are
   used.

   Since many of the Suite B algorithms enjoy uses in other environments
   as well, the majority of the conventions needed for the Suite B
   algorithms are already specified in other documents.  This document
   references the source of these conventions, and the relevant details
   are repeated to aid developers that choose to support Suite B.  In a
   few cases, additional algorithm identifiers are needed, and they are
   provided in this document.

1.1.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [STDWORDS].








Housley & Solinas            Informational                   PAGE 1 top


RFC 5008 Suite B in S/MIME September 2007 1.2. ASN.1 CMS values are generated using ASN.1 [X.208-88], the Basic Encoding Rules (BER) [X.209-88], and the Distinguished Encoding Rules (DER) [X.509-88]. 1.3. Suite B Security Levels Suite B offers two security levels: Level 1 and Level 2. Security Level 2 offers greater cryptographic strength by using longer keys. For S/MIME signed messages, Suite B follows the direction set by RFC 3278 [CMSECC], but some additional algorithm identifiers are assigned. Suite B uses these algorithms: Security Level 1 Security Level 2 ---------------- ---------------- Message Digest: SHA-256 SHA-384 Signature: ECDSA with P-256 ECDSA with P-384 For S/MIME-encrypted messages, Suite B follows the direction set by RFC 3278 [CMSECC] and follows the conventions set by RFC 3565 [CMSAES]. Again, additional algorithm identifiers are assigned. Suite B uses these algorithms: Security Level 1 Security Level 2 ---------------- ---------------- Key Agreement: ECDH with P-256 ECDH with P-384 Key Derivation: SHA-256 SHA-384 Key Wrap: AES-128 Key Wrap AES-256 Key Wrap Content Encryption: AES-128 CBC AES-256 CBC 2. SHA-256 and SHA-256 Message Digest Algorithms This section specifies the conventions employed by implementations that support SHA-256 or SHA-384 [SHA2]. In Suite B, Security Level 1, the SHA-256 message digest algorithm MUST be used. In Suite B, Security Level 2, SHA-384 MUST be used. Within the CMS signed-data content type, message digest algorithm identifiers are located in the SignedData digestAlgorithms field and the SignerInfo digestAlgorithm field. Also, message digest values are located in the Message Digest authenticated attribute. In addition, message digest values are input into signature algorithms. The SHA-256 and SHA-384 message digest algorithms are defined in FIPS Pub 180-2 [SHA2, EH]. The algorithm identifier for SHA-256 is: Housley & Solinas Informational PAGE 2 top

RFC 5008 Suite B in S/MIME September 2007 id-sha256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 1 } The algorithm identifier for SHA-384 is: id-sha384 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 2 } There are two possible encodings for the AlgorithmIdentifier parameters field. The two alternatives arise from the fact that when the 1988 syntax for AlgorithmIdentifier was translated into the 1997 syntax, the OPTIONAL associated with the AlgorithmIdentifier parameters got lost. Later, the OPTIONAL was recovered via a defect report, but by then many people thought that algorithm parameters were mandatory. Because of this history some implementations encode parameters as a NULL element and others omit them entirely. The correct encoding for the SHA-256 and SHA-384 message digest algorithms is to omit the parameters field; however, to ensure compatibility, implementations ought to also handle a SHA-256 and SHA-384 AlgorithmIdentifier parameters field, which contains a NULL. For both SHA-256 and SHA-384, the AlgorithmIdentifier parameters field is OPTIONAL, and if present, the parameters field MUST contain a NULL. Implementations MUST accept SHA-256 and SHA-384 AlgorithmIdentifiers with absent parameters. Implementations MUST accept SHA-256 and SHA-384 AlgorithmIdentifiers with NULL parameters. Implementations SHOULD generate SHA-256 and SHA-384 AlgorithmIdentifiers with absent parameters. 3. ECDSA Signature Algorithm This section specifies the conventions employed by implementations that support Elliptic Curve Digital Signature Algorithm (ECDSA). The direction set by RFC 3278 [CMSECC] is followed, but additional message digest algorithms and additional elliptic curves are employed. In Suite B, Security Level 1, ECDSA MUST be used with the SHA-256 message digest algorithm and the P-256 elliptic curve. In Suite B, Security Level 2, ECDSA MUST be used with the SHA-384 message digest algorithm and the P-384 elliptic curve. The P-256 and P-384 elliptic curves are specified in [DSS]. Within the CMS signed-data content type, signature algorithm identifiers are located in the SignerInfo signatureAlgorithm field of SignedData. In addition, signature algorithm identifiers are located in the SignerInfo signatureAlgorithm field of countersignature attributes. Housley & Solinas Informational PAGE 3 top

RFC 5008 Suite B in S/MIME September 2007 Within the CMS signed-data content type, signature values are located in the SignerInfo signature field of SignedData. In addition, signature values are located in the SignerInfo signature field of countersignature attributes. As specified in RFC 3279 [PKIX1ALG], ECDSA and Elliptic Curve Diffie-Hellman (ECDH) use the same algorithm identifier for subject public keys in certificates, and it is repeated here: id-ecPublicKey OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-x9-62(10045) keyType(2) 1 } This object identifier is used in public key certificates for both ECDSA signature keys and ECDH encryption keys. The intended application for the key may be indicated in the key usage field (see RFC 3280 [PKIX1]). The use of separate keys for signature and encryption purposes is RECOMMENDED; however, the use of a single key for both signature and encryption purposes is not forbidden. As specified in RFC 3279 [PKIX1ALG], ECDSA and ECDH use the same encoding for subject public keys in certificates, and it is repeated here: ECPoint ::= OCTET STRING The elliptic curve public key (an OCTET STRING) is mapped to a subject public key (a BIT STRING) as follows: the most significant bit of the OCTET STRING becomes the most significant bit of the BIT STRING, and the least significant bit of the OCTET STRING becomes the least significant bit of the BIT STRING. Note that this octet string may represent an elliptic curve point in compressed or uncompressed form. Implementations that support elliptic curves according to this specification MUST support the uncompressed form and MAY support the compressed form. ECDSA and ECDH require use of certain parameters with the public key. The parameters may be inherited from the certificate issuer, implicitly included through reference to a named curve, or explicitly included in the certificate. As specified in RFC 3279 [PKIX1ALG], the parameter structure is: EcpkParameters ::= CHOICE { ecParameters ECParameters, namedCurve OBJECT IDENTIFIER, implicitlyCA NULL } Housley & Solinas Informational PAGE 4 top

RFC 5008 Suite B in S/MIME September 2007 In Suite B, the namedCurve CHOICE MUST be used. The object identifier for P-256 is: ansip256r1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-x9-62(10045) curves(3) prime(1) 7 } The object identifier for P-384 is: secp384r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 34 } The algorithm identifier used in CMS for ECDSA with SHA-256 signature values is: ecdsa-with-SHA256 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-sha2(3) 2 } The algorithm identifier used in CMS for ECDSA with SHA-384 signature values is: ecdsa-with-SHA384 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-sha2(3) 3 } When either the ecdsa-with-SHA256 or the ecdsa-with-SHA384 algorithm identifier is used, the AlgorithmIdentifier parameters field MUST be absent. When signing, the ECDSA algorithm generates two values, commonly called r and s. To transfer these two values as one signature, they MUST be encoded using the Ecdsa-Sig-Value type specified in RFC 3279 [PKIX1ALG]: Ecdsa-Sig-Value ::= SEQUENCE { r INTEGER, s INTEGER } 4. Key Management CMS accommodates the following general key management techniques: key agreement, key transport, previously distributed symmetric key- encryption keys, and passwords. In Suite B, ephemeral-static key agreement MUST be used as described in Section 4.1. When a key agreement algorithm is used, a key-encryption algorithm is also needed. In Suite B, the Advanced Encryption Standard (AES) Key Wrap, as specified in RFC 3394 [AESWRAP, SH], MUST be used as the key-encryption algorithm. AES Key Wrap is discussed further in Section 4.2. The key-encryption key used with the AES Key Wrap Housley & Solinas Informational PAGE 5 top

RFC 5008 Suite B in S/MIME September 2007 algorithm is obtained from a key derivation function (KDF). In Suite B, there are two KDFs, one based on SHA-256 and one based on SHA-384. These KDFs are discussed further in Section 4.3. 4.1. ECDH Key Agreement Algorithm This section specifies the conventions employed by implementations that support ECDH. The direction set by RFC 3278 [CMSECC] is followed, but additional key derivation functions and key wrap algorithms are employed. S/MIME is used in store-and-forward communications, which means that ephemeral-static ECDH is always employed. This means that the message originator uses an ephemeral ECDH key and that the message recipient uses a static ECDH key, which is obtained from an X.509 certificate. In Suite B, Security Level 1, ephemeral-static ECDH MUST be used with the SHA-256 KDF, AES-128 Key Wrap, and the P-256 elliptic curve. In Suite B, Security Level 2, ephemeral-static ECDH MUST be used with the SHA-384 KDF, AES-256 Key Wrap, and the P-384 elliptic curve. Within the CMS enveloped-data content type, key agreement algorithm identifiers are located in the EnvelopedData RecipientInfos KeyAgreeRecipientInfo keyEncryptionAlgorithm field. As specified in RFC 3279 [PKIX1ALG], ECDSA and ECDH use the same conventions for carrying a subject public key in a certificate. These conventions are discussed in Section 3. Ephemeral-static ECDH key agreement is defined in [SEC1] and [IEEE1363]. When using ephemeral-static ECDH, the EnvelopedData RecipientInfos keyAgreeRecipientInfo field is used as follows: version MUST be 3. originator MUST be the originatorKey alternative. The originatorKey algorithm field MUST contain the id-ecPublicKey object identifier (see Section 3) with NULL parameters. The originatorKey publicKey field MUST contain the message originator's ephemeral public key, which is a DER-encoded ECPoint (see Section 3). The ECPoint SHOULD be represented in uncompressed form. ukm can be present or absent. However, message originators SHOULD include the ukm. As specified in RFC 3852 [CMS], implementations MUST support ukm message recipient processing, so interoperability is not a concern if the ukm is present or absent. When present, the ukm is used to ensure that a different key-encryption key is generated, even when the ephemeral private key is improperly used Housley & Solinas Informational PAGE 6 top

RFC 5008 Suite B in S/MIME September 2007 more than once. See [RANDOM] for guidance on generation of random values. keyEncryptionAlgorithm MUST be one of the two algorithm identifiers listed below, and the algorithm identifier parameter field MUST be present and identify the key wrap algorithm. The key wrap algorithm denotes the symmetric encryption algorithm used to encrypt the content-encryption key with the pairwise key- encryption key generated using the ephemeral-static ECDH key agreement algorithm (see Section 4.3). In Suite B, Security Level 1, the keyEncryptionAlgorithm MUST be dhSinglePass-stdDH- sha256kdf-scheme, and the keyEncryptionAlgorithm parameter MUST be a KeyWrapAlgorithm containing id-aes128-wrap (see Section 4.2). In Suite B, Security Level 2, the keyEncryptionAlgorithm MUST be dhSinglePass-stdDH-sha384kdf-scheme, and the keyEncryptionAlgorithm parameter MUST be a KeyWrapAlgorithm containing id-aes256-wrap (see Section 4.2). The algorithm identifier for dhSinglePass-stdDH-sha256kdf-scheme and dhSinglePass-stdDH-sha384kdf-scheme are: dhSinglePass-stdDH-sha256kdf-scheme OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) 11 1 } dhSinglePass-stdDH-sha384kdf-scheme OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) 11 2 } Both of these algorithm identifiers use KeyWrapAlgorithm as the type for their parameter: KeyWrapAlgorithm ::= AlgorithmIdentifier recipientEncryptedKeys contains an identifier and an encrypted key for each recipient. The RecipientEncryptedKey KeyAgreeRecipientIdentifier MUST contain either the issuerAndSerialNumber identifying the recipient's certificate or the RecipientKeyIdentifier containing the subject key identifier from the recipient's certificate. In both cases, the recipient's certificate contains the recipient's static ECDH public key. RecipientEncryptedKey EncryptedKey MUST contain the content- encryption key encrypted with the ephemeral-static, ECDH-generated pairwise key-encryption key using the algorithm specified by the KeyWrapAlgorithm (see Section 4.3). Housley & Solinas Informational PAGE 7 top

RFC 5008 Suite B in S/MIME September 2007 4.2. AES Key Wrap CMS offers support for symmetric key-encryption key management; however, it is not used in Suite B. Rather, the AES Key Wrap key- encryption algorithm, as specified in RFC 3394 [AESWRAP, SH], is used to encrypt the content-encryption key with a pairwise key-encryption key that is generated using ephemeral-static ECDH. In Suite B, Security Level 1, AES-128 Key Wrap MUST be used as the key-encryption algorithm. In Suite B, Security Level 2, AES-256 Key Wrap MUST be used as the key-encryption algorithm. Within the CMS enveloped-data content type, wrapped content- encryption keys are located in the EnvelopedData RecipientInfos KeyAgreeRecipientInfo RecipientEncryptedKeys encryptedKey field, and key wrap algorithm identifiers are located in the KeyWrapAlgorithm parameters within the EnvelopedData RecipientInfos KeyAgreeRecipientInfo keyEncryptionAlgorithm field. The algorithm identifiers for AES Key Wrap are specified in RFC 3394 [SH], and the ones needed for Suite B are repeated here: id-aes128-wrap OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) aes(1) 5 } id-aes256-wrap OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) aes(1) 45 } 4.3. Key Derivation Functions CMS offers support for deriving symmetric key-encryption keys from passwords; however, password-based key management is not used in Suite B. Rather, KDFs based on SHA-256 and SHA-384 are used to derive a pairwise key-encryption key from the shared secret produced by ephemeral-static ECDH. In Suite B, Security Level 1, the KDF based on SHA-256 MUST be used. In Suite B, Security Level 2, KDF based on SHA-384 MUST be used. As specified in Section 8.2 of RFC 3278 [CMSECC], using ECDH with the CMS enveloped-data content type, the derivation of key-encryption keys makes use of the ECC-CMS-SharedInfo type, which is repeated here: ECC-CMS-SharedInfo ::= SEQUENCE { keyInfo AlgorithmIdentifier, entityUInfo [0] EXPLICIT OCTET STRING OPTIONAL, suppPubInfo [2] EXPLICIT OCTET STRING } Housley & Solinas Informational PAGE 8 top

RFC 5008 Suite B in S/MIME September 2007 In Suite B, the fields of ECC-CMS-SharedInfo are used as follows: keyInfo contains the object identifier of the key-encryption algorithm that will be used to wrap the content-encryption key and NULL parameters. In Suite B, Security Level 1, AES-128 Key Wrap MUST be used, resulting in {id-aes128-wrap, NULL}. In Suite B, Security Level 2, AES-256 Key Wrap MUST be used, resulting in {id-aes256-wrap, NULL}. entityUInfo optionally contains a random value provided by the message originator. If the ukm is present, then the entityUInfo MUST be present, and it MUST contain the ukm value. If the ukm is not present, then the entityUInfo MUST be absent. suppPubInfo contains the length of the generated key-encryption key, in bits, represented as a 32-bit unsigned number, as described in RFC 2631 [CMSDH]. In Suite B, Security Level 1, a 128-bit AES key MUST be used, resulting in 0x00000080. In Suite B, Security Level 2, a 256-bit AES key MUST be used, resulting in 0x00000100. ECC-CMS-SharedInfo is DER-encoded and used as input to the key derivation function, as specified in Section 3.6.1 of [SEC1]. Note that ECC-CMS-SharedInfo differs from the OtherInfo specified in [CMSDH]. Here, a counter value is not included in the keyInfo field because the KDF specified in [SEC1] ensures that sufficient keying data is provided. The KDF specified in [SEC1] provides an algorithm for generating an essentially arbitrary amount of keying material from the shared secret produced by ephemeral-static ECDH, which is called Z for the remainder of this discussion. The KDF can be summarized as: KM = Hash ( Z || Counter || ECC-CMS-SharedInfo ) To generate a key-encryption key, one or more KM blocks are generated, incrementing Counter appropriately, until enough material has been generated. The KM blocks are concatenated left to right: KEK = KM ( counter=1 ) || KM ( counter=2 ) ... The elements of the KDF are used as follows: Hash is the one-way hash function, and it is either SHA-256 or SHA-384 [SHA2]. In Suite B, Security Level 1, the SHA-256 MUST be used. In Suite B, Security Level 2, SHA-384 MUST be used. Housley & Solinas Informational PAGE 9 top

RFC 5008 Suite B in S/MIME September 2007 Z is the shared secret value generated by ephemeral-static ECDH. Leading zero bits MUST be preserved. In Suite B, Security Level 1, Z MUST be exactly 256 bits. In Suite B, Security Level 2, Z MUST be exactly 384 bits. Counter is a 32-bit unsigned number, represented in network byte order. Its initial value MUST be 0x00000001 for any key derivation operation. In Suite B, Security Level 1 and Security Level 2, exactly one iteration is needed; the Counter is not incremented. ECC-CMS-SharedInfo is composed as described above. It MUST be DER encoded. To generate a key-encryption key, one KM block is generated, with a Counter value of 0x00000001: KEK = KM ( 1 ) = Hash ( Z || Counter=1 || ECC-CMS-SharedInfo ) In Suite B, Security Level 1, the key-encryption key MUST be the most significant 128 bits of the SHA-256 output value. In Suite B, Security Level 2, the key-encryption key MUST be the most significant 256 bits of the SHA-384 output value. Note that the only source of secret entropy in this computation is Z. The effective key space of the key-encryption key is limited by the size of Z, in addition to any security level considerations imposed by the elliptic curve that is used. However, if entityUInfo is different for each message, a different key-encryption key will be generated for each message. 5. AES CBC Content Encryption This section specifies the conventions employed by implementations that support content encryption using AES [AES] in Cipher Block Chaining (CBC) mode [MODES]. The conventions in RFC 3565 [CMSAES] are followed. In Suite B, Security Level 1, the AES-128 in CBC mode MUST be used for content encryption. In Suite B, Security Level 2, AES-256 in CBC mode MUST be used. Within the CMS enveloped-data content type, content encryption algorithm identifiers are located in the EnvelopedData EncryptedContentInfo contentEncryptionAlgorithm field. The content encryption algorithm is used to encipher the content located in the EnvelopedData EncryptedContentInfo encryptedContent field. The AES CBC content-encryption algorithm is described in [AES] and [MODES]. The algorithm identifier for AES-128 in CBC mode is: Housley & Solinas Informational PAGE 10 top

RFC 5008 Suite B in S/MIME September 2007 id-aes128-CBC OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) aes(1) 2 } The algorithm identifier for AES-256 in CBC mode is: id-aes256-CBC OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) aes(1) 42 } The AlgorithmIdentifier parameters field MUST be present, and the parameters field must contain AES-IV: AES-IV ::= OCTET STRING (SIZE(16)) The 16-octet initialization vector is generated at random by the originator. See [RANDOM] for guidance on generation of random values. 6. Security Considerations This document specifies the conventions for using the NSA's Suite B algorithms in S/MIME. All of the algorithms have been specified in previous documents, although a few new algorithm identifiers have been assigned. Two levels of security may be achieved using this specification. Users must consider their risk environment to determine which level is appropriate for their own use. For signed and encrypted messages, Suite B provides a consistent level of security for confidentiality and integrity of the message content. The security considerations in RFC 3852 [CMS] discuss the CMS as a method for digitally signing data and encrypting data. The security considerations in RFC 3370 [CMSALG] discuss cryptographic algorithm implementation concerns in the context of the CMS. The security considerations in RFC 3278 [CMSECC] discuss the use of elliptic curve cryptography (ECC) in the CMS. The security considerations in RFC 3565 [CMSAES] discuss the use of AES in the CMS. Housley & Solinas Informational PAGE 11 top

RFC 5008 Suite B in S/MIME September 2007 7. References 7.1. Normative References [AES] National Institute of Standards and Technology, "Advanced Encryption Standard (AES)", FIPS PUB 197, November 2001. [AESWRAP] National Institute of Standards and Technology, "AES Key Wrap Specification", 17 November 2001. [See http://csrc.nist.gov/encryption/kms/key-wrap.pdf] [DSS] National Institute of Standards and Technology, "Digital Signature Standard (DSS)", FIPS PUB 186-2, January 2000. [ECDSA] American National Standards Institute, "Public Key Cryptography For The Financial Services Industry: The Elliptic Curve Digital Signature Algorithm (ECDSA)", ANSI X9.62-1998, 1999. [CMS] Housley, R., "Cryptographic Message Syntax (CMS)", RFC 3852, July 2004. [CMSAES] Schaad, J., "Use of the Advanced Encryption Standard (AES) Encryption Algorithm in Cryptographic Message Syntax (CMS)", RFC 3565, July 2003. [CMSALG] Housley, R., "Cryptographic Message Syntax (CMS) Algorithms", RFC 3370, August 2002. [CMSDH] Rescorla, E., "Diffie-Hellman Key Agreement Method", RFC 2631, June 1999. [CMSECC] Blake-Wilson, S., Brown, D., and P. Lambert, "Use of Elliptic Curve Cryptography (ECC) Algorithms in Cryptographic Message Syntax (CMS)", RFC 3278, April 2002. [IEEE1363] Institute of Electrical and Electronics Engineers, "Standard Specifications for Public Key Cryptography", IEEE Std 1363, 2000. [MODES] National Institute of Standards and Technology, "DES Modes of Operation", FIPS Pub 81, 2 December 1980. [MSG] Ramsdell, B., "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.1 Message Specification", RFC 3851, July 2004. Housley & Solinas Informational PAGE 12 top

RFC 5008 Suite B in S/MIME September 2007 [PKIX1] Housley, R., Polk, W., Ford, W., and D. Solo, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 3280, April 2002. [PKIX1ALG] Bassham, L., Polk, W., and R. Housley, "Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 3279, April 2002. [SEC1] Standards for Efficient Cryptography Group, "Elliptic Curve Cryptography", 2000. [See http://www.secg.org/ collateral/sec1.pdf.] [SH] Schaad, J., and R. Housley, "Advanced Encryption Standard (AES) Key Wrap Algorithm", RFC 3394, September 2002. [SHA2] National Institute of Standards and Technology, "Secure Hash Standard", FIPS 180-2, 1 August 2002. [STDWORDS] S. Bradner, "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [X.208-88] CCITT. Recommendation X.208: Specification of Abstract Syntax Notation One (ASN.1). 1988. [X.209-88] CCITT. Recommendation X.209: Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1). 1988. [X.509-88] CCITT. Recommendation X.509: The Directory - Authentication Framework. 1988. 7.2. Informative References [EH] Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms (SHA and HMAC-SHA)", RFC 4634, July 2006. [RANDOM] Eastlake, D., 3rd, Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, June 2005. [SuiteB] National Security Agency, "Fact Sheet NSA Suite B Cryptography", July 2005. [See http://www.nsa.gov/ia/ industry/crypto_Suite_b.cfm?MenuID=10.2.7) Housley & Solinas Informational PAGE 13 top

RFC 5008 Suite B in S/MIME September 2007 Authors' Addresses Russell Housley Vigil Security, LLC 918 Spring Knoll Drive Herndon, VA 20170 USA EMail: housley@vigilsec.com Jerome A. Solinas National Information Assurance Laboratory National Security Agency 9800 Savage Road Fort George G. Meade, MD 20755 USA EMail: jasolin@orion.ncsc.mil Housley & Solinas Informational PAGE 14 top

RFC 5008 Suite B in S/MIME September 2007 Full Copyright Statement Copyright © The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Housley & Solinas Informational PAGE 15 top

Suite B in Secure/Multipurpose Internet Mail Extensions (S/MIME) RFC TOTAL SIZE: 32869 bytes PUBLICATION DATE: Thursday, September 13th, 2007 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 5008: The IETF Trust, Thursday, September 13th, 2007
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement