The RFC Archive
 The RFC Archive   RFC 5083   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 5083

Cryptographic Message Syntax (CMS) Authenticated-Enveloped-Data Content Type

Last modified on Thursday, November 8th, 2007

Permanent link to RFC 5083
Search GitHub Wiki for RFC 5083
Show other RFCs mentioning RFC 5083







Network Working Group                                        R. Housley
Request for Comments: 5083                               Vigil Security
Updates: 3852                                             November 2007
Category: Standards Track 


                   Cryptographic Message Syntax (CMS)
               Authenticated-Enveloped-Data Content Type

 Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Abstract

   This document describes an additional content type for the
   Cryptographic Message Syntax (CMS).  The authenticated-enveloped-data
   content type is intended for use with authenticated encryption modes.
   All of the various key management techniques that are supported in
   the CMS enveloped-data content type are also supported by the CMS
   authenticated-enveloped-data content type.

1. Introduction

   This document describes an additional content type for the
   Cryptographic Message Syntax (CMS) [CMS].  The authenticated-
   enveloped-data content type is intended for use with authenticated
   encryption modes, where an arbitrary content is both authenticated
   and encrypted.  Also, some associated data in the form of
   authenticated attributes can also be authenticated.  All of the
   various key management techniques that are supported in the CMS
   enveloped-data content type are also supported by the CMS
   authenticated-enveloped-data content type.

   The conventions for using the Advanced Encryption Standard-Counter
   with Cipher Block Chaining-Message Authentication Code (AES-CCM) and
   the AES-Galois/Counter Mode (GCM) authenticated encryption algorithms
   with the CMS authenticated-enveloped-data content type defined in
   this document can be found in [AESALGS].

   The authenticated-enveloped-data content type, like all of the other
   CMS content types, employs ASN.1 [X.208-88], and it uses both the
   Basic Encoding Rules (BER) [X.209-88] and the Distinguished Encoding
   Rules (DER) [X.509-88].



Housley                     Standards Track                  PAGE 1 top


RFC 5083 Authenticated-Enveloped-Data November 2007 1.1. Terminology In this document, the key words MUST, MUST NOT, REQUIRED, SHOULD, SHOULD NOT, RECOMMENDED, MAY, and OPTIONAL are to be interpreted as described in [STDWORDS]. 1.2. Version Numbers The major data structure (AuthEnvelopedData) includes a version number as the first item in the data structure. The version number is intended to avoid ASN.1 decode errors. Some implementations do not check the version number prior to attempting a decode, and then if a decode error occurs, the version number is checked as part of the error handling routine. This is a reasonable approach; it places error processing outside of the fast path. This approach is also forgiving when an incorrect version number is used by the sender. Whenever the structure is updated, a higher version number will be assigned. However, to ensure maximum interoperability, the higher version number is only used when the new syntax feature is employed. That is, the lowest version number that supports the generated syntax is used. 2. Authenticated-Enveloped-Data Content Type The authenticated-enveloped-data content type consists of an authenticated and encrypted content of any type and encrypted content-authenticated-encryption keys for one or more recipients. The combination of the authenticated and encrypted content and one encrypted content-authenticated-encryption key for a recipient is a "digital envelope" for that recipient. Any type of content can be enveloped for an arbitrary number of recipients using any of the supported key management techniques for each recipient. In addition, authenticated but not encrypted attributes may be provided by the originator. The typical application of the authenticated-enveloped-data content type will represent one or more recipients' digital envelopes on an encapsulated content. Authenticated-enveloped-data is constructed by the following steps: 1. A content-authenticated-encryption key for a particular content- authenticated-encryption algorithm is generated at random. Housley Standards Track PAGE 2 top

RFC 5083 Authenticated-Enveloped-Data November 2007 2. The content-authenticated-encryption key is encrypted for each recipient. The details of this encryption depend on the key management algorithm used, but four general techniques are supported: Key Transport: the content-authenticated-encryption key is encrypted in the recipient's public key; Key Agreement: the recipient's public key and the sender's private key are used to generate a pairwise symmetric key- encryption key, then the content-authenticated-encryption key is encrypted in the pairwise symmetric key-encryption key; Symmetric Key-Encryption Keys: the content-authenticated- encryption key is encrypted in a previously distributed symmetric key-encryption key; and Passwords: the content-authenticated-encryption key is encrypted in a key-encryption key that is derived from a password or other shared secret value. 3. For each recipient, the encrypted content-authenticated- encryption key and other recipient-specific information are collected into a RecipientInfo value, defined in Section 6.2 of [CMS]. 4. Any attributes that are to be authenticated but not encrypted are collected in the authenticated attributes. 5. The attributes collected in step 4 are authenticated and the CMS content is authenticated and encrypted with the content- authenticated-encryption key. If the authenticated encryption algorithm requires either the additional authenticated data (AAD) or the content to be padded to a multiple of some block size, then the padding is added as described in Section 6.3 of [CMS]. 6. Any attributes that are to be provided without authentication or encryption are collected in the unauthenticated attributes. 7. The RecipientInfo values for all the recipients, the authenticated attributes, the unauthenticated attributes, and the authenticated and encrypted content are collected together to form an AuthEnvelopedData value as defined in Section 2.1. Housley Standards Track PAGE 3 top

RFC 5083 Authenticated-Enveloped-Data November 2007 A recipient opens the digital envelope by decrypting one of the encrypted content-authenticated-encryption keys, and then using the recovered key to decrypt and verify the integrity of the authenticated and encrypted content as well as to verify the integrity of the authenticated attributes. The recipient MUST verify the integrity of the received content before releasing any information, especially the plaintext of the content. If the integrity verification fails, the receiver MUST destroy all of the plaintext of the content. This section is divided into three parts. The first part describes the AuthEnvelopedData content type, the second part describes the authentication and encryption process, and the third part describes the key encryption process. 2.1. AuthEnvelopedData Type The following object identifier identifies the authenticated- enveloped-data content type: id-ct-authEnvelopedData OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) ct(1) 23 } The authenticated-enveloped-data content type MUST have ASN.1 type AuthEnvelopedData: AuthEnvelopedData ::= SEQUENCE { version CMSVersion, originatorInfo [0] IMPLICIT OriginatorInfo OPTIONAL, recipientInfos RecipientInfos, authEncryptedContentInfo EncryptedContentInfo, authAttrs [1] IMPLICIT AuthAttributes OPTIONAL, mac MessageAuthenticationCode, unauthAttrs [2] IMPLICIT UnauthAttributes OPTIONAL } The fields of type AuthEnvelopedData have the following meanings: version is the syntax version number. It MUST be set to 0. originatorInfo optionally provides information about the originator. It is present only if required by the key management algorithm. It may contain certificates and Certificate Revocation Lists (CRLs), and the OriginatorInfo type is defined in Section 6.1 of [CMS]. Housley Standards Track PAGE 4 top

RFC 5083 Authenticated-Enveloped-Data November 2007 recipientInfos is a collection of per-recipient information. There MUST be at least one element in the collection. The RecipientInfo type is defined in Section 6.2 of [CMS]. authEncryptedContentInfo is the authenticated and encrypted content. The CMS enveloped-data content type uses the same type to carry the encrypted content. The EncryptedContentInfo type is defined in Section 6.1 of [CMS]. authAttrs optionally contains the authenticated attributes. The CMS authenticated-data content type uses the same type to carry authenticated attributes. The authAttrs MUST be present if the content type carried in EncryptedContentInfo is not id-data. AuthAttributes MUST be DER encoded, even if the rest of the AuthEnvelopedData structure is BER encoded. The AuthAttributes type is defined in Section 9.1 of [CMS]; however, in this case, the message-digest attribute SHOULD NOT be included. Useful attribute types are defined in Section 11 of [CMS]. mac is the integrity check value (ICV) or message authentication code (MAC) that is generated by the authenticated encryption algorithm. The CMS authenticated-data content type uses the same type to carry a MAC. In this case, the MAC covers the authenticated attributes and the content directly, and a digest algorithm is not used. The MessageAuthenticationCode type is defined in Section 9.1 of [CMS]. unauthAttrs optionally contains the unauthenticated attributes. The CMS authenticated-data content type uses the same type to carry unauthenticated attributes. The UnauthAttributes type is defined in Section 9.1 of [CMS]. Useful attribute types are defined in Section 11 of [CMS]. 2.2. Authentication and Encryption Process The content-authenticated-encryption key for the desired content- authenticated-encryption algorithm is randomly generated. If the authenticated encryption algorithm requires the content to be padded to a multiple of some block size, then the padding MUST be added as described in Section 6.3 of [CMS]. This padding method is well defined if and only if the block size is less than 256 octets. If optional authenticated attributes are present, then they are DER encoded. A separate encoding of the authAttrs field is performed to construct the authenticated associated data (AAD) input to the authenticated encryption algorithm. For the purposes of constructing the AAD, the IMPLICIT [1] tag in the authAttrs field is not used for Housley Standards Track PAGE 5 top

RFC 5083 Authenticated-Enveloped-Data November 2007 the DER encoding: rather a universal SET OF tag is used. That is, the DER encoding of the SET OF tag, rather than of the IMPLICIT [1] tag, is to be included in the construction for the AAD along with the length and content octets of the authAttrs value. If the authenticated encryption algorithm requires the AAD to be padded to a multiple of some block size, then the padding MUST be added as described in Section 6.3 of [CMS]. This padding method is well defined if and only if the block size is less than 256 octets. If optional authenticated attributes are absent, then zero bits of input are provided for the AAD input to the authenticated encryption algorithm. The inputs to the authenticated encryption algorithm are the content (the data, which is padded if necessary), the DER-encoded authenticated attributes (the AAD, which is padded if necessary), and the content-authenticated-encryption key. Under control of a content-authenticated-encryption key, the authenticated encryption operation maps an arbitrary string of octets (the data) to another string of octets (the ciphertext) and it computes an authentication tag over the AAD and the data. The encrypted data is included in the AuthEnvelopedData authEncryptedContentInfo encryptedContent as an OCTET STRING, and the authentication tag is included in the AuthEnvelopedData mac. 2.3. Key Encryption Process The input to the key encryption process -- the value supplied to the recipient's key-encryption algorithm -- is just the "value" of the content-authenticated-encryption key. Any of the aforementioned key management techniques can be used for each recipient of the same encrypted content. 3. Security Considerations This specification defines an additional CMS content type. The security considerations provided in [CMS] apply to this content type as well. Many authenticated encryption algorithms make use of a block cipher in counter mode to provide encryption. When used properly, counter mode provides strong confidentiality. Bellare, Desai, Jokipii, and Rogaway show in [BDJR] that the privacy guarantees provided by counter mode are at least as strong as those for Cipher Block Chaining (CBC) mode when using the same block cipher. Housley Standards Track PAGE 6 top

RFC 5083 Authenticated-Enveloped-Data November 2007 Unfortunately, it is easy to misuse counter mode. If counter block values are ever used for more that one encryption operation with the same key, then the same key stream will be used to encrypt both plaintexts, and the confidentiality guarantees are voided. Fortunately, the CMS authenticated-enveloped-data content type provides all of the tools needed to avoid misuse of counter mode. All of the existing key management techniques permit a fresh content-encryption key to be generated for each content. In addition, existing authenticated encryption algorithms that make use of counter mode support the use of an unpredictable nonce value in the counter block. This unpredictable nonce value (sometimes called a "salt") should be carried in an algorithm identifier parameter. Implementations must randomly generate content-authenticated- encryption keys, padding, and unpredictable nonce values. Also, the generation of public/private key pairs relies on a random numbers. The use of inadequate pseudo-random number generators (PRNGs) to generate cryptographic keys can result in little or no security. An attacker may find it much easier to reproduce the PRNG environment that produced the keys, and then searching the resulting small set of possibilities, rather than brute force searching the whole key space. The generation of quality random numbers is difficult. RFC 4086 [RANDOM] offers important guidance in this area. If the message-digest attribute is included in the AuthAttributes, then the attribute value will contain the unencrypted one-way hash value of the plaintext of the content. Disclosure of this hash value enables content tracking, and it can be used to determine if the plaintext matches one or more candidate contents. For these reasons, the AuthAttributes SHOULD NOT contain the message-digest attribute. CMS is often used to provide encryption in messaging environments. In messaging environments, various forms of unsolicited messages (such as spam and phishing) represent a significant volume of unwanted traffic. Present mitigation strategies for unwanted message traffic involve analysis of message plaintext. When recipients accept unsolicited encrypted messages, they become even more vulnerable to unwanted traffic since many present mitigation strategies will be unable to access the plaintext. Therefore, software that receives messages that have been encrypted using CMS needs to provide one or more mechanisms to handle the unwanted message traffic. One approach that does not require disclosure of keying material to a server is to reject or discard encrypted messages unless they purport to come from a member of a white list. Housley Standards Track PAGE 7 top

RFC 5083 Authenticated-Enveloped-Data November 2007 4. ASN.1 Module CMS-AuthEnvelopedData-2007 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) cms-authEnvelopedData(31) } DEFINITIONS IMPLICIT TAGS ::= BEGIN -- EXPORTS All -- The types and values defined in this module are exported for use -- in the other ASN.1 modules. Other applications may use them for -- their own purposes. IMPORTS -- Imports from RFC 3852 [CMS], Section 12.1 AuthAttributes, CMSVersion, EncryptedContentInfo, MessageAuthenticationCode, OriginatorInfo, RecipientInfos, UnauthAttributes FROM CryptographicMessageSyntax2004 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) cms-2004(24) } ; id-ct-authEnvelopedData OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) ct(1) 23 } AuthEnvelopedData ::= SEQUENCE { version CMSVersion, originatorInfo [0] IMPLICIT OriginatorInfo OPTIONAL, recipientInfos RecipientInfos, authEncryptedContentInfo EncryptedContentInfo, authAttrs [1] IMPLICIT AuthAttributes OPTIONAL, mac MessageAuthenticationCode, unauthAttrs [2] IMPLICIT UnauthAttributes OPTIONAL } END -- of CMS-AuthEnvelopedData-2007 Housley Standards Track PAGE 8 top

RFC 5083 Authenticated-Enveloped-Data November 2007 5. References 5.1. Normative References [CMS] Housley, R., "Cryptographic Message Syntax (CMS)", RFC 3852, July 2004. [STDWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [X.208-88] CCITT. Recommendation X.208: Specification of Abstract Syntax Notation One (ASN.1). 1988. [X.209-88] CCITT. Recommendation X.209: Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1). 1988. [X.509-88] CCITT. Recommendation X.509: The Directory- Authentication Framework. 1988. 5.2. Informative References [AESALGS] Housley, R., "Using AES-CCM and AES-GCM Authenticated Encryption in the Cryptographic Message Syntax (CMS)", RFC 5084, November 2007. [BDJR] Bellare, M., Desai, A., Jokipii, E., and P. Rogaway, "A Concrete Security Treatment of Symmetric Encryption: Analysis of the DES Modes of Operation", Proceedings 38th Annual Symposium on Foundations of Computer Science, 1997. [RANDOM] Eastlake, D., 3rd, Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, June 2005. Author's Address Russell Housley Vigil Security, LLC 918 Spring Knoll Drive Herndon, VA 20170 USA EMail: housley@vigilsec.com Housley Standards Track PAGE 9 top

RFC 5083 Authenticated-Enveloped-Data November 2007 Full Copyright Statement Copyright © The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Housley Standards Track PAGE 10 top

Cryptographic Message Syntax (CMS) Authenticated-Enveloped-Data Content Type RFC TOTAL SIZE: 22810 bytes PUBLICATION DATE: Thursday, November 8th, 2007 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 5083: The IETF Trust, Thursday, November 8th, 2007
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement