The RFC Archive
 The RFC Archive   RFC 1660   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 1660

Definitions of Managed Objects for Parallel-printer-like Hardware Devices using SMIv2

Last modified on Tuesday, July 19th, 1994

Permanent link to RFC 1660
Search GitHub Wiki for RFC 1660
Show other RFCs mentioning RFC 1660







Network Working Group                                         B. Stewart
Request for Comments: 1660                                  Xyplex, Inc.
Obsoletes: 1318                                                July 1994
Category: Standards Track 


        Definitions of Managed Objects for Parallel-printer-like
                      Hardware Devices using SMIv2

 Status of this Memo

   This document specifies an IAB standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "IAB
   Official Protocol Standards" for the standardization state and status
   of this protocol.  Distribution of this memo is unlimited.

 Table of Contents

   1. Introduction ...............................................    1
   2. The SNMPv2 Network Management Framework ....................    1
   2.1 Object Definitions ........................................    2
   3. Overview ...................................................    2
   3.1 Relationship to Interface MIB .............................    2
   4. Definitions ................................................    3
   5. Acknowledgements ...........................................    9
   6. References .................................................    9
   7. Security Considerations ....................................   10
   8. Author's Address ...........................................   10

1.  Introduction

   This memo defines an extension to the Management Information Base
   (MIB) for use with network management protocols in the Internet
   community.  In particular, it defines objects for the management of
   Parallel-printer-like devices.

2.  The SNMPv2 Network Management Framework

   The SNMPv2 Network Management Framework consists of four major
   components.  They are:

      o    RFC 1442 [1] which defines the SMI, the mechanisms used for
           describing and naming objects for the purpose of management.

      o    STD 17, RFC 1213 [2] defines MIB-II, the core set of managed
           objects for the Internet suite of protocols.




Stewart                                                      PAGE 1 top


RFC 1660 Parallel-printer-like MIB July 1994 o RFC 1445 [3] which defines the administrative and other architectural aspects of the framework. o RFC 1448 [4] which defines the protocol used for network access to managed objects. The Framework permits new objects to be defined for the purpose of experimentation and evaluation. 2.1. Object Definitions Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to refer to the object type. 3. Overview The Parallel-printer-like Hardware Device MIB applies to interface ports that would most probably support the Character MIB. The most common example is Centronics-like printer port. The Parallel-printer-like Hardware Device MIB is mandatory for all systems that have such a hardware port supporting services managed through some other MIB. The Parallel-printer-like Hardware Port MIB includes Centronics-like and Data-Products-like parallel physical links with a similar set of control signals. The MIB contains objects that relate to physical layer connections. The MIB comprises one base object and three tables, detailed in the following sections. The tables contain objects for ports and input and output control signals. 3.1. Relationship to Interface MIB The Parallel-printer-like MIB is one of many MIBs designed for layered use as described in the Interface MIB [5]. In most implementations where it is present, it will be in the lowest interface sublayer, that is, the Parallel-printer-like MIB represents the physical layer, providing service to higher layers such as the Stewart PAGE 2 top

RFC 1660 Parallel-printer-like MIB July 1994 Character MIB [6]. Although it is unlikely that a parallel printer port will actually be used as a network interface, which is the intent of the Interface MIB, the Parallel-printer-like MIB is closely connected to the Character MIB, which can share hardware interfaces with network operation, and relate to the RS-232 MIB [7]. The Interface MIB's ifTestTable and ifRcvAddressTable are not relevant to the Parallel-printer-like MIB. The Parallel-printer-like MIB is relevant for ifType values para(34) and perhaps others. The Parallel-printer-like MIB requires the conformance groups ifGeneralGroup, and ifFixedLengthGroup. Usefulness of error counters in this MIB depends on the octet counters in ifFixedLengthGroup. 4. Definitions PARALLEL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32 FROM SNMPv2-SMI InterfaceIndex FROM IF-MIB transmission FROM RFC 1213-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; para MODULE-IDENTITY LAST-UPDATED "9405261700Z" ORGANIZATION "IETF Character MIB Working Group" CONTACT-INFO " Bob Stewart Postal: Xyplex, Inc. 295 Foster Street Littleton, MA 01460 Tel: 508-952-4816 Fax: 508-952-4887 E-mail: rlstewart@eng.xyplex.com" Stewart PAGE 3 top

RFC 1660 Parallel-printer-like MIB July 1994 DESCRIPTION "The MIB module for Parallel-printer-like hardware devices." ::= { transmission 34 } -- Generic Parallel-printer-like information paraNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports (regardless of their current state) in the Parallel-printer-like port table." ::= { para 1 } -- the Parallel-printer-like Port table paraPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port entries. The number of entries is given by the value of paraNumber." ::= { para 2 } paraPortEntry OBJECT-TYPE SYNTAX ParaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status and parameter values for a port." INDEX { paraPortIndex } ::= { paraPortTable 1 } ParaPortEntry ::= SEQUENCE { paraPortIndex InterfaceIndex, paraPortType INTEGER, paraPortInSigNumber Integer32, paraPortOutSigNumber Integer32 } Stewart PAGE 4 top

RFC 1660 Parallel-printer-like MIB July 1994 paraPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next." ::= { paraPortEntry 1 } paraPortType OBJECT-TYPE SYNTAX INTEGER { other(1), centronics(2), dataproducts(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port's hardware type." ::= { paraPortEntry 2 } paraPortInSigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input signals for the port in the input signal table (paraPortInSigTable). The table contains entries only for those signals the software can detect and that are useful to observe." ::= { paraPortEntry 3 } paraPortOutSigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output signals for the port in the output signal table (paraPortOutSigTable). The table contains entries only for those signals the software can assert and that are useful to observe." ::= { paraPortEntry 4 } Stewart PAGE 5 top

RFC 1660 Parallel-printer-like MIB July 1994 -- Parallel-printer-like Input Signal Table paraInSigTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaInSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port input control signal entries." ::= { para 3 } paraInSigEntry OBJECT-TYPE SYNTAX ParaInSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input control signal status for a hardware port." INDEX { paraInSigPortIndex, paraInSigName } ::= { paraInSigTable 1 } ParaInSigEntry ::= SEQUENCE { paraInSigPortIndex InterfaceIndex, paraInSigName INTEGER, paraInSigState INTEGER, paraInSigChanges Counter32 } paraInSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of paraPortIndex for the port to which this entry belongs." ::= { paraInSigEntry 1 } paraInSigName OBJECT-TYPE SYNTAX INTEGER { power(1), online(2), busy(3), paperout(4), fault(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of a hardware signal." ::= { paraInSigEntry 2 } Stewart PAGE 6 top

RFC 1660 Parallel-printer-like MIB July 1994 paraInSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal state." ::= { paraInSigEntry 3 } paraInSigChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'." ::= { paraInSigEntry 4 } -- Output Signal Table paraOutSigTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaOutSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port output control signal entries." ::= { para 4 } paraOutSigEntry OBJECT-TYPE SYNTAX ParaOutSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Output control signal status for a hardware port." INDEX { paraOutSigPortIndex, paraOutSigName } ::= { paraOutSigTable 1 } ParaOutSigEntry ::= SEQUENCE { paraOutSigPortIndex InterfaceIndex, paraOutSigName INTEGER, paraOutSigState INTEGER, paraOutSigChanges Counter32 } Stewart PAGE 7 top

RFC 1660 Parallel-printer-like MIB July 1994 paraOutSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of paraPortIndex for the port to which this entry belongs." ::= { paraOutSigEntry 1 } paraOutSigName OBJECT-TYPE SYNTAX INTEGER { power(1), online(2), busy(3), paperout(4), fault(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of a hardware signal." ::= { paraOutSigEntry 2 } paraOutSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal state." ::= { paraOutSigEntry 3 } paraOutSigChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'." ::= { paraOutSigEntry 4 } -- conformance information paraConformance OBJECT IDENTIFIER ::= { para 5 } paraGroups OBJECT IDENTIFIER ::= { paraConformance 1 } paraCompliances OBJECT IDENTIFIER ::= { paraConformance 2 } Stewart PAGE 8 top

RFC 1660 Parallel-printer-like MIB July 1994 -- compliance statements paraCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which have Parallel-printer-like hardware interfaces." MODULE -- this module MANDATORY-GROUPS { paraGroup } ::= { paraCompliances 1 } -- units of conformance paraGroup OBJECT-GROUP OBJECTS { paraNumber, paraPortIndex, paraPortType, paraPortInSigNumber, paraPortOutSigNumber, paraInSigPortIndex, paraInSigName, paraInSigState, paraInSigChanges, paraOutSigPortIndex, paraOutSigName, paraOutSigState, paraOutSigChanges } STATUS current DESCRIPTION "A collection of objects providing information applicable to all Parallel-printer-like interfaces." ::= { paraGroups 1 } END 5. Acknowledgements This memo was produced by the IETF Character MIB Working Group. 6. References [1] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure of Management Information for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1442, SNMP Research,Inc., Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon University, April 1993. [2] McCloghrie, K., and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213, Hughes LAN Systems, Performance Systems International, March 1991. Stewart PAGE 9 top

RFC 1660 Parallel-printer-like MIB July 1994 [3] Galvin, J., and K. McCloghrie, "Administrative Model for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1445, Trusted Information Systems, Hughes LAN Systems, April 1993. [4] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1448, SNMP Research,Inc., Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon University, April 1993. [5] McCloghrie, K., and F. Kastenholz, "Evolution of the Interfaces Group of MIB-II", RFC 1573, Hughes LAN Systems, FTP Software, January 1994. [6] Stewart, B., "Definitions of Managed Objects for Character Stream Devices using SMIv2", RFC 1658, Xyplex, Inc., July 1994. [7] Stewart, B., "Definitions of Managed Objects for RS-232-like Devices using SMIv2", RFC 1659, Xyplex, Inc., July 1994. 7. Security Considerations Security issues are not discussed in this memo. 8. Author's Address Bob Stewart Xyplex, Inc. 295 Foster Street Littleton, MA 01460 Phone: 508-952-4816 Fax: 508-952-4887 EMail: rlstewart@eng.xyplex.com Stewart PAGE 10 top

Definitions of Managed Objects for Parallel-printer-like Hardware Devices using SMIv2 RFC TOTAL SIZE: 16784 bytes PUBLICATION DATE: Tuesday, July 19th, 1994 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 1660: The IETF Trust, Tuesday, July 19th, 1994
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement