The RFC Archive
 The RFC Archive   RFC 2943   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 2943

TELNET Authentication Using DSA

Last modified on Wednesday, October 11th, 2000

Permanent link to RFC 2943
Search GitHub Wiki for RFC 2943
Show other RFCs mentioning RFC 2943







Network Working Group                                         R. Housley
Request for Comments: 2943                                    T. Horting
Category: Standards Track                                       P. Yee
                                                                  SPYRUS
                                                          September 2000


                    TELNET Authentication Using DSA

 Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Copyright Notice

   Copyright © The Internet Society (2000).  All Rights Reserved.

 Abstract

   This document defines a telnet authentication mechanism using the
   Digital Signature Algorithm (DSA) [FIPS186].  It relies on the Telnet
   Authentication Option [RFC 2941].

1. Command Names and Codes

    AUTHENTICATION           37

      Authentication Commands:

        IS                       0
        SEND                     1
        REPLY                    2
        NAME                     3

      Authentication Types:

        DSS                     14

      Modifiers:

        AUTH_WHO_MASK            1
        AUTH_CLIENT_TO_SERVER    0
        AUTH_SERVER_TO CLIENT    1




Housley, et al.             Standards Track                  PAGE 1 top


RFC 2943 TELNET Authentication Using DSA September 2000 AUTH_HOW_MASK 2 AUTH_HOW_ONE_WAY 0 AUTH_HOW_MUTUAL 2 ENCRYPT_MASK 20 ENCRYPT_OFF 0 ENCRYPT_USING_TELOPT 4 ENCRYPT_AFTER_EXCHANGE 16 ENCRYPT_RESERVED 20 INI_CRED_FWD_MASK 8 INI_CRED_FWD_OFF 0 INI_CRED_FWD_ON 8 Sub-option Commands: DSS_INITIALIZE 1 DSS_TOKENBA 2 DSS_CERTA_TOKENAB 3 DSS_CERTB_TOKENBA2 4 2. TELNET Security Extensions TELNET, as a protocol, has no concept of security. Without negotiated options, it merely passes characters back and forth between the NVTs represented by the two TELNET processes. In its most common usage as a protocol for remote terminal access (TCP port 23), TELNET connects to a server that requires user-level authentication through a user name and password in the clear; the server does not authenticate itself to the user. The TELNET Authentication Option provides for user authentication and server authentication. User authentication replaces or augments the normal host password mechanism. Server authentication is normally done in conjunction with user authentication. In order to support these security services, the two TELNET entities must first negotiate their willingness to support the TELNET Authentication Option. Upon agreeing to support this option, the parties are then able to perform sub-option negotiations to the authentication protocol to be used, and possibly the remote user name to be used for authorization checking. Authentication and parameter negotiation occur within an unbounded series of exchanges. The server proposes a preference-ordered list of authentication types (mechanisms) which it supports. In addition to listing the mechanisms it supports, the server qualifies each mechanism with a modifier that specifies whether the authentication Housley, et al. Standards Track PAGE 2 top

RFC 2943 TELNET Authentication Using DSA September 2000 is to be one-way or mutual, and in which direction the authentication is to be performed. The client selects one mechanism from the list and responds to the server indicating its choice and the first set of authentication data needed for the selected authentication type. The server and the client then proceed through whatever number of iterations are required to arrive at the requested authentication. 3. Use of Digital Signature Algorithm (DSA) DSA is also known as the Digital Signature Standard (DSS), and the names are used interchangeably. This paper specifies a method in which DSA may be used to achieve certain security services when used in conjunction with the TELNET Authentication Option. SHA-1 [FIPS180-1] is used with DSA [FIPS186]. DSA may provide either unilateral or mutual authentication. Due to TELNET's character-by-character nature, it is not well-suited to the application of integrity-only services, therefore use of the DSA profile provides authentication but it does not provide session integrity. This specification follows the token and exchanges defined in NIST FIPS PUB 196 [FIPS196], Standard for Public Key Cryptographic Entity Authentication Mechanisms including Appendix A on ASN.1 encoding of messages and tokens. All data that is covered by a digital signature must be encoded using the Distinguished Encoding Rules (DER). However, other data may use either the Basic Encoding Rules (BER) or DER [X.208]. 3.1. Unilateral Authentication with DSA Unilateral authentication must be done client-to-server. What follows are the protocol steps necessary to perform DSA authentication as specified in FIPS PUB 196 under the TELNET Authentication Option framework. Where failure modes are encountered, the return codes follow those specified in the TELNET Authentication Option. They are not enumerated here, as they are invariant among the mechanisms used. FIPS PUB 196 employs a set of exchanges that are transferred to provide authentication. Each exchange employs various fields and tokens, some of which are optional. In addition, each token has several subfields that are optional. A conformant subset of the fields and subfields have been selected. The tokens are ASN.1 encoded as defined in Appendix A of FIPS PUB 196, and each token is named to indicate the direction in which it flows (e.g., TokenBA flows from Party B to Party A). All data that is covered by a digital signature must be encoded using the Housley, et al. Standards Track PAGE 3 top

RFC 2943 TELNET Authentication Using DSA September 2000 Distinguished Encoding Rules (DER). Data that is not covered by a digital signature may use either the Basic Encoding Rules (BER) or DER [X.208]. Figure 1 illustrates the exchanges for unilateral authentication. During authentication, the client may provide the user name to the server by using the authentication name sub-option. If the name sub-option is not used, the server will generally prompt for a name and password in the clear. The name sub-option must be sent after the server sends the list of authentication types supported and before the client finishes the authentication exchange, this ensures that the server will not prompt for a user name and password. In figure 1, the name sub-option is sent immediately after the server presents the list of authentication types supported. For one-way DSS authentication, the two-octet authentication type pair is DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_ONE_WAY | ENCRYPT_OFF | INI_CRED_FWD_OFF. This indicates that the DSS authentication mechanism will be used to authenticate the client to the server and that no encryption will be performed. CertA is the clients certificate. Both certificates are X.509 certificates that contain DSS public keys[RFC 2459]. The client must validate the server's certificate before using the DSA public key it contains. Within the unbounded authentication exchange, implementation is greatly simplified if each portion of the exchange carries a unique identifier. For this reason, a single octet sub-option identifier is carried immediately after the two-octet authentication type pair. The exchanges detailed in Figure 1 below presume knowledge of FIPS PUB 196 and the TELNET Authentication Option. The client is Party A, while the server is Party B. At the end of the exchanges, the client is authenticated to the server. Housley, et al. Standards Track PAGE 4 top

RFC 2943 TELNET Authentication Using DSA September 2000 ------------------------------------------------------------------ Client (Party A) Server (Party B) <-- IAC DO AUTHENTICATION IAC WILL AUTHENTICATION --> <-- IAC SB AUTHENTICATION SEND <list of authentication options> IAC SE IAC SB AUTHENTICATION NAME <user name> --> IAC SB AUTHENTICATION IS DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_ONE_WAY | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_INITIALIZE IAC SE --> <-- IAC SB AUTHENTICATION REPLY DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_ONE_WAY | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_TOKENBA Sequence( TokenID, TokenBA ) IAC SE IAC SB AUTHENTICATION IS DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_ONE_WAY | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_CERTA_TOKENAB Sequence( TokenID, CertA, TokenAB ) IAC SE --> ------------------------------------------------------------------ Figure 1 Housley, et al. Standards Track PAGE 5 top

RFC 2943 TELNET Authentication Using DSA September 2000 3.2. Mutual Authentication with DSA Mutual authentication is slightly more complex. Figure 2 illustrates the exchanges. For mutual DSS authentication, the two-octet authentication type pair is DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_MUTUAL | ENCRYPT_OFF | INI_CRED_FWD_OFF. This indicates that the DSS authentication mechanism will be used to mutually authenticate the client and the server and that no encryption will be performed. --------------------------------------------------------------------- Client (Party A) Server (Party B) IAC WILL AUTHENTICATION --> <-- IAC DO AUTHENTICATION <-- IAC SB AUTHENTICATION SEND <list of authentication options> IAC SE IAC SB AUTHENTICATION NAME <user name> --> IAC SB AUTHENTICATION IS DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_MUTUAL | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_INITIALIZE IAC SE --> <-- IAC SB AUTHENTICATION REPLY DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_MUTUAL | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_TOKENBA Sequence( TokenID, TokenBA ) IAC SE Housley, et al. Standards Track PAGE 6 top

RFC 2943 TELNET Authentication Using DSA September 2000 Client (Party A) Server (Party B) IAC SB AUTHENTICATION IS DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_MUTUAL | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_CERTA_TOKENAB Sequence( TokenID, CertA, TokenAB ) IAC SE --> <-- IAC SB AUTHENTICATION REPLY DSS AUTH_CLIENT_TO_SERVER | AUTH_HOW_MUTUAL | ENCRYPT_OFF | INI_CRED_FWD_OFF DSS_CERTB_TOKENBA2 Sequence( TokenID, CertB, TokenBA2 ) IAC SE --------------------------------------------------------------------- Figure 2 4. ASN.1 Syntax As stated earlier, a conformant subset of the defined fields and subfields from FIPS PUB 196 have been selected. This section provides the ASN.1 syntax for that conformant subset. Figure 1 and Figure 2 include representations of the structures defined in this section. Implementors should refer to the following table to determine the ASN.1 definitions that match the figure references: Figure 1 Sequence( TokenID, TokenBA ) MessageBA Sequence( TokenID, CertA, TokenAB ) MessageAB Figure 2 Sequence( TokenID, TokenBA ) MessageBA Sequence( TokenID, CertA, TokenAB ) MessageAB Sequence( TokenID, CertB, TokenBA2 ) MessageBA2 The following ASN.1 definitions specify the conformant subset of FIPS 196. For simplicity, no optional fields or subfields are included. The ASN.1 definition for CertificationPath is imported from CCITT Recommendation X.509 [X.509], and The ASN.1 definition for Name is imported from CCITT Recommendation X.501 [X.501]. These ASN.1 Housley, et al. Standards Track PAGE 7 top

RFC 2943 TELNET Authentication Using DSA September 2000 definitions are not repeated here. All DSA signature values are encoded as a sequence of two integers, employing the same conventions specified in RFC 2459, section 7.2.2. MessageBA ::= SEQUENCE { tokenId [0] TokenId, tokenBA TokenBA } TokenBA ::= SEQUENCE { ranB RandomNumber, timestampB TimeStamp } MessageAB ::= SEQUENCE { tokenId [0] TokenId, certA [1] CertData, tokenAB TokenAB } TokenAB ::= SEQUENCE { ranA RandomNumber, ranB RandomNumber, entityB EntityName, timestampB TimeStamp, absigValue OCTET STRING } MessageBA2 ::= SEQUENCE { tokenId [0] TokenId, certB [1] CertData, tokenBA2 TokenBA2 } TokenBA2 ::= SEQUENCE { ranB [0] RandomNumber, ranA [1] RandomNumber, entityA EntityName, timestampB2 TimeStamp, ba2sigValue OCTET STRING } CertData ::= SEQUENCE { certPath [0] CertificationPath } -- see X.509 EntityName ::= SEQUENCE OF CHOICE { -- only allow one! directoryName [4] Name } -- see X.501 RandomNumber ::= INTEGER -- 20 octets Housley, et al. Standards Track PAGE 8 top

RFC 2943 TELNET Authentication Using DSA September 2000 TokenId ::= SEQUENCE { tokenType INTEGER, -- see table below protoVerNo INTEGER } -- always 0x0001 TimeStamp ::= GeneralizedTime The TokenId.TokenType is used to distinguish the message type and the authentication type (either unilateral or mutual). The following table provides the values needed to implement this specification: Message Type Authentication Type TokenId.TokenType MessageBA Unilateral 0x0001 Mutual 0x0011 MessageAB Unilateral 0x0002 Mutual 0x0012 MessageBA Mutual 0x0013 5. Security Considerations This entire memo is about security mechanisms. For DSA to provide the authentication discussed, the implementation must protect the private key from disclosure. Implementations must randomly generate DSS private keys, 'k' values used in DSS signatures, and nonces. The use of inadequate pseudo- random number generators (PRNGs) to generate cryptographic values can result in little or no security. An attacker may find it much easier to reproduce the PRNG environment that produced the values, searching the resulting small set of possibilities, rather than using a brute force search. The generation of quality random numbers is difficult. RFC 1750 [RFC 1750] offers important guidance in this area, and Appendix 3 of FIPS PUB 186 [FIPS186] provides one quality PRNG technique. 6. Acknowledgements We would like to thank William Nace for support during implementation of this specification. Housley, et al. Standards Track PAGE 9 top

RFC 2943 TELNET Authentication Using DSA September 2000 7. IANA Considerations The authentication type DSS and its associated suboption values are registered with IANA. Any suboption values used to extend the protocol as described in this document must be registered with IANA before use. IANA is instructed not to issue new suboption values without submission of documentation of their use. 8. References FIPS180-1 Secure Hash Standard. FIPS Pub 180-1. April 17, 1995. <http://csrc.nist.gov/fips/fips180-1.pdf> FIPS186 Digital Signature Standard (DSS). FIPS Pub 186. May 19, 1994. <http://csrc.nist.gov/fips/fips186.pdf> FIPS196 Standard for Entity Authentication Using Public Key Cryptography. FIPS Pub 196. February 18, 1997. <http://csrc.nist.gov/fips/fips196.pdf> RFC 1750 Eastlake, 3rd, D., Crocker, S. and J. Schiller, "Randomness Recommendations for Security", RFC 1750, December 1994. RFC 2459 Housley, R., Ford, W., Polk, W. and D. Solo, "Internet X.509 Public Key Infrastructure: X.509 Certificate and CRL Profile", RFC 2459, January 1999. RFC 2941 T'so, T. and J. Altman, "Telnet Authentication Option", RFC 2941, September 2000. X.208 CCITT. Recommendation X.208: Specification of Abstract Syntax Notation One (ASN.1). 1988. X.501 CCITT. Recommendation X.501: The Directory - Models. 1988. X.509 CCITT. Recommendation X.509: The Directory - Authentication Framework. 1988. Housley, et al. Standards Track PAGE 10 top

RFC 2943 TELNET Authentication Using DSA September 2000 9. Authors' Addresses Russell Housley SPYRUS 381 Elden Street, Suite 1120 Herndon, VA 20172 USA EMail: housley@spyrus.com Todd Horting SPYRUS 381 Elden Street, Suite 1120 Herndon, VA 20172 USA EMail: thorting@spyrus.com Peter Yee SPYRUS 5303 Betsy Ross Drive Santa Clara, CA 95054 USA EMail: yee@spyrus.com Housley, et al. Standards Track PAGE 11 top

RFC 2943 TELNET Authentication Using DSA September 2000 10. Full Copyright Statement Copyright © The Internet Society (2000). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Housley, et al. Standards Track PAGE 12 top

TELNET Authentication Using DSA RFC TOTAL SIZE: 21694 bytes PUBLICATION DATE: Wednesday, October 11th, 2000 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 2943: The IETF Trust, Wednesday, October 11th, 2000
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement