The RFC Archive
 The RFC Archive   RFC 3017   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 3017

XML DTD for Roaming Access Phone Book

Last modified on Monday, December 4th, 2000

Permanent link to RFC 3017
Search GitHub Wiki for RFC 3017
Show other RFCs mentioning RFC 3017







Network Working Group                                          M. Riegel
Request for Comments: 3017                                    Siemens AG
Category: Standards Track                                      G. Zorn
                                                           Cisco Systems
                                                           December 2000


                 XML DTD for Roaming Access Phone Book

 Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Copyright Notice

   Copyright © The Internet Society (2000).  All Rights Reserved.

 Abstract

   This document defines the syntax as well as the semantics of the
   information to be included in the phone book for roaming
   applications.  It comprises the information necessary to select the
   most appropriate ISP and to configure the host to get access to the
   network of the provider. The specification consists of a small set of
   required information elements and a variety of possible extensions.
   All data is specified in XML [5] (Extensible Markup Language) syntax
   leading to a concise XML DTD (Document Type Declaration) for the
   phone book.

 Table of Contents

   1.  Introduction .............................................  3
   2.  Rationale for XML Usage ..................................  4
   3.  Specification of Requirements ............................  5
   4.  Value type notations for 'stronger' typing ...............  5
   5.  Container Element Definitions ............................  5
     5.1.  PhoneBook ............................................  5
      5.1.1.  phoneBook Attribute "name" ........................  6
      5.1.2.  phoneBook Attribute "version" .....................  6
     5.2.  POP ..................................................  7
      5.2.1.  pop Attribute "entryVersion" ......................  8
     5.3.  Setup ................................................  8
     5.4.  Support ..............................................  9
     5.5.  Provider .............................................  9



Riegel & Zorn               Standards Track                  PAGE 1 top


RFC 3017 Roaming Access Phone Book XML DTD December 2000 6. Information Element Definitions .......................... 10 6.1. Information elements defined for the POP element ..... 10 6.1.1. Address ........................................... 10 6.1.1.1. address Attribute "family" ..................... 10 6.1.1.2. address Attribute "countryCode" ................ 11 6.1.1.3. address Attribute "areaCode" ................... 11 6.1.2. Media ............................................. 11 6.1.2.1. Modem Protocols ................................ 12 6.1.2.2. ISDN Protocols ................................. 12 6.1.2.3. ATM Protocols .................................. 13 6.1.2.4. Frame Relay Protocols .......................... 13 6.1.2.5. X.25 Protocols ................................. 13 6.1.3. Minimum Data Rate ................................. 14 6.1.4. Maximum Data Rate ................................. 14 6.1.5. POP Properties .................................... 14 6.1.6. Tunneling Protocols ............................... 15 6.1.7. Dialing Script .................................... 15 6.1.8. Pricing Information ............................... 16 6.1.9. City .............................................. 16 6.1.10. Region ........................................... 16 6.1.11. Country .......................................... 16 6.1.12. POP Setup ........................................ 17 6.1.13. POP Support ...................................... 17 6.1.14. POP Provider ..................................... 17 6.2. Information elements defined for the Setup element ... 17 6.2.1. DNS Server Address ................................ 17 6.2.2. NNTP Server Name .................................. 18 6.2.3. SMTP Server Name .................................. 18 6.2.4. POP3 Server Name .................................. 18 6.2.5. IMAP Server Name .................................. 18 6.2.6. WWW Proxy ......................................... 19 6.2.7. FTP Proxy ......................................... 19 6.2.8. Winsock Proxy ..................................... 19 6.2.9. Default Gateway Address ........................... 19 6.2.10. User Name Suffix ................................. 20 6.2.11. User Name Prefix ................................. 20 6.3. Information elements defined for the support element.. 20 6.3.1. Support Telephone Number .......................... 20 6.3.2. Support Email Address ............................. 21 6.4. Information elements defined for the provider element. 21 6.4.1. Provider Name ..................................... 21 6.4.2. Provider Icon ..................................... 21 6.4.3. Provider's World Wide Web URL ..................... 21 6.4.4. Provider's Main Email Address ..................... 22 6.4.5. Billing Inquiry Email Address ..................... 22 6.4.6. Further elements .................................. 22 7. Complete XML DTD for the roaming phone book .............. 22 8. Security Considerations .................................. 28 Riegel & Zorn Standards Track PAGE 2 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 9. IANA Considerations ...................................... 28 9.1. Registration of new attribute values ................. 29 9.2. Registration of new information elements ............. 29 10. References .............................................. 30 11. Appendix: Examples ...................................... 31 11.1. The most simple example ............................. 31 11.2. A more comprehensive example ........................ 31 12. Acknowledgments ......................................... 31 13. Authors' Addresses ...................................... 32 14. Full Copyright Statement ................................ 33 1. Introduction Roaming applications depend on the delivery of information about provided services and the procedures to get connected to the network from the roaming consortium to the individual users as well as from the operators of the network access servers, normally the members of the roaming consortium, and the roaming consortium. "phone book" +------+ +--+ | | | ++ | ISP1 | -- | | --+ | | +---+ \ "phone book" +------+ \ +------+ +------+ +--+ \_ | | +--+ +------+ | | | ++ | | | ++ | | | ISP2 | -- | | -->>--- | | --- | | ->> | USER | | | +---+ _ | | +---+ | | +------+ / | | +------+ +------+ +--+ / +------+ | | | ++ / Roaming | ISP# | -- | | --+ Consortium | | +---+ +------+ The roaming consortium assembles from the individual contributions of the providers belonging to the consortium a unified version of the phone book for usage by the customers. Probably different groups of users get different versions of a phone book adapted to their particular needs. Even users might generate different subsets especially suited to particular applications from the information received from the roaming consortium, e.g., retrieving only entries for a particular country or extracting all access points providing wireless connectivity. Riegel & Zorn Standards Track PAGE 3 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Therefore it is desirable to define a highly portable and well formed structure of the phone book to enable easy generation and postprocessing. Goals of this document include: - Creating a flexible, extensible and robust framework upon which to build a standard phone book; - Promoting a standard phone book format, to enhance interoperability between ISPs and roaming consortia as well as to enable automatic extraction of configuration data by a wide variety of devices; - Defining a compact structure containing the essential information for the roaming user, to allow for storage and easy update even on small devices. It is not intended by this document to create a plethoric solution, with phone book elements to fit every condition on earth, neither to define any kind of phone book update or transfer protocol. 2. Rationale for XML Usage XML is rapidly becoming a standard format for data exchange between different applications also taking into account the transfer and access of data over the web. XML is used as syntax for expressing the structure and content of a roaming phone book to enable widespread usage and access to many different kind of media (e.g., paper, CDROM, www) using a widespread selection of access devices. Furthermore XML enables: - Extensibility - Flexibility - Integration with directories Extensibility is important because phone books are living documents; as such, it is unlikely that all the semantic requirements of arbitrary Internet service providers (ISPs) would be met by a fixed scheme, no matter how well thought out. Phone book designers must be free to create new attributes in a well-understood fashion to meet changing business needs. Flexibility is required of the attribute definition syntax for many of the same reasons that semantic extensibility is necessary. If we assume that phone book designers may need to define elements of arbitrary type, the syntax chosen must be able to represent these data objects cleanly. Using XML for describing the data content of the phone book fits this bill nicely, since it can be used to unambiguously describe virtually any data type. Riegel & Zorn Standards Track PAGE 4 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Integration with directories: although it is unlikely that phone books will be stored in the directory due to performance considerations, the creation of a XML DTD describing phone book content leaves that option open, with relatively little incremental effort required to implement it. 3. Specification of Requirements In this document, the key words "MAY", "MUST, "MUST NOT", "optional", "recommended", "SHOULD", and "SHOULD NOT", are to be interpreted as described in [1]. 4. Value type notations for 'stronger' typing XML DTDs do not currently have capabilities for 'strong typing' of the content of elements. The only type definition foreseen in the base specification is "#PCDATA", 'parsable character data'. This might be sufficient and is used throughout this document to define elements containing information mainly aimed for interpretation by human beings. To enable a more concise description of the content of particular elements several value type notations are introduced. This allows for a more detailed type description of the content of elements in cases where it seems to be desirable. <?xml version="1.0" encoding="UTF-8"?> <!-- Phone book value type notation declarations --> <!NOTATION FQDN PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Fully_qualified_domain_name"> <!NOTATION IPADR PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type IP_address"> <!NOTATION B64JPG PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Base64_encoded_jpeg_image"> <!NOTATION B64GIF PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Base64_encoded_gif_image"> 5. Container Element Definitions 5.1. PhoneBook The phoneBook element is the basic container for phone book entries. It has two attributes, a phone book name and a phone book version number (applying to the phone book as a whole), and always contains one or more pop elements. A phoneBook element may also contain multiple Setup, Support and Provider elements, if they are referenced to by more than one pop element. Riegel & Zorn Standards Track PAGE 5 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!ELEMENT phoneBook ( pop+, setup*, support*, provider*)> <!ATTLIST phoneBook name CDATA #REQUIRED version CDATA #REQUIRED > phoneBook +-----------------------------------+ | phoneBookName (req)| | phoneBookVersion (req)| | +-----------------------+ | | | pop |+ (req)| | +-----------------------+| | | + - - - - - - - - - - - + | | | | + - - - - - - - - - - - + | | | setup |+ (opt)| | + - - - - - - - - - - - +| | | + - - - - - - - - - - - + | | | | + - - - - - - - - - - - + | | | support |+ (opt)| | + - - - - - - - - - - - +| | | + - - - - - - - - - - - + | | | | + - - - - - - - - - - - + | | | provider |+ (opt)| | + - - - - - - - - - - - +| | | + - - - - - - - - - - - + | +-----------------------------------+ 5.1.1. phoneBook Attribute "name" The phoneBook attribute "name" is an arbitrary string assigned as an identifier for a phone book. 5.1.2. phoneBook Attribute "version" The phoneBookVersion attribute is an integer representing the version of the phone book; it is a monotonically increasing counter which should be incremented each time the phone book is modified. This element can be used by a server to help decide what (if any) actions are required to bring a client's phone book up to date. For example, the client can, at connect time, send an update request to the server Riegel & Zorn Standards Track PAGE 6 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 including in the request the version number of its current phone book. If the client's phone book version is not the same as the server's current phone book version, the server can easily take appropriate action, e.g., reply with a URL pointing to a file containing the differences between the client and server phone books. 5.2. POP The pop element contains information elements relevant to individual network points of presence (POPs). The required information elements are addrFamily, address, media and entryVersion. The media element represents the media types supported by the POP, while the entryVersion element is a monotonically-increasing integer which should be incremented whenever the object is modified. The following information elements are currently defined for the pop element. Additional information elements may be defined by IANA in future. POP +-----------------------------------+ | entryVersion (req)| | +-------------------------+ | | | address | (req)| | +-------------------------+ | | media (req)| | minBitsPerSecond (opt)| | maxBitsPerSecond (opt)| | "popProperties" (opt)| | "tunnelingProtocols" (opt)| | dialScript (opt)| | pricingInformation (opt)| | + - - - - - - - - - - - - + | | | "location" | (opt)| | + - - - - - - - - - - - - + | | + - - - - - - - - - - - - + | | | "popSetup" | (opt)| | + - - - - - - - - - - - - + | | + - - - - - - - - - - - - + | | | "popSupport" | (opt)| | + - - - - - - - - - - - - + | | + - - - - - - - - - - - - + | | | "popProvider" | (opt)| | + - - - - - - - - - - - - + | +-----------------------------------+ Riegel & Zorn Standards Track PAGE 7 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!ENTITY % popInformation "address, media+, minBitsPerSecond?, maxBitsPerSecond?, popProperty*, tunnelProto*, dialScript?, pricingInformation?, city?, region?, country?, (setup | setupPtr)?, (support | supportPtr)?, (provider |providerPtr)?"> <!ELEMENT pop ( %popInformation; )> <!ATTLIST pop entryVersion CDATA #REQUIRED> 5.2.1. pop Attribute "entryVersion" The entryVersion attribute is an integer representing the version of the POP object; it is a monotonically increasing counter which should be incremented each time the object is modified. This attribute may be useful in merging and updating phone books. 5.3. Setup The Setup element includes information elements which describe services which may change from provider to provider or even from POP to POP. Some of the values contained in these information elements may be available by other means (e.g., DHCP), but others may not. The following information elements are currently defined for the Setup element. Additional information elements may be defined by IANA in future. Syntax: <!ENTITY % setupInformation "dnsServerAddress*, nntpServerName*, smtpServerName*, popServerName*, imapServerName*, Riegel & Zorn Standards Track PAGE 8 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 wwwProxyServerName*, ftpProxyServerName*, winsockProxyServerName*, defaultGatewayAddress?, userNamePrefix?, userNameSuffix?"> <!ELEMENT setup ( %setupInformation; )> <!ATTLIST setup id ID #REQUIRED> 5.4. Support The Support element includes those information elements that are pertinent to the provision of customer support for a POP or provider. Languages spoken by the staff at the support center might be specified by multiple entries for the attribute value language. Additional information elements for the Support element may be defined by IANA in future. Syntax: <!ENTITY % supportInformation "(supportTelephoneNumber | supportMailtoURL)+"> <!ELEMENT support %supportInformation; > <!ATTLIST support id ID #REQUIRED language NMTOKENS #IMPLIED > 5.5. Provider The Provider element contains information elements pertaining to the general business operations of a given network service provider. The information elements include such things as telephone number, mailing address, etc., as well as URLs for e-mail and a World Wide Web site. A Provider element may also contain a reference to support information. Currently the following information elements are defined for the Provider element. Additional information elements may be defined by IANA in future. Syntax: <!ENTITY % providerInformation "providerName?, providerIcon?, wwwURL?, Riegel & Zorn Standards Track PAGE 9 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 generalMailtoURL?, billingMailtoURL?, businessCategory?, x121Address?, registeredAddress?, destinationIndicator?, preferredDeliveryMethod?, telexNumber?, teletexTerminalIdentifier?, telephoneNumber?, internationalISDNNumber?, facsimileTelephoneNumber?, street?, postOfficeBox?, postalCode?, postalAddress?, physicalDeliveryOfficeName?, description?, supportPtr*"> <!ELEMENT provider ( %providerInformation; )> <!ATTLIST provider id ID #REQUIRED> 6. Information Element Definitions 6.1. Information elements defined for the POP element 6.1.1. Address The address element provides the information representing the address of the POP. For POPs offering dial-up network access, the address element will at least contain an IA5 string representing a telephone number, formatted in standard fashion [4] (e.g., "+ 1 234 5678"). More detailed information may be available by optional attribute values. Syntax: <!-- A network address for this POP --> <!ELEMENT address (#PCDATA)> 6.1.1.1. address Attribute "family" The attribute family of the element address defines the address family to which the element value belongs. For POPs offering dial-up network access, the addrFamily attribute will generally contain a value for a telephone network based address family. Currently the following attribute values are defined. Additional values may be Riegel & Zorn Standards Track PAGE 10 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 registered by IANA in future. Value Description ------ ------------------------------------------ E164 ITU-T E.164 (PSTN, SMDS, Frame Relay, ATM) X121 ITU-T X.121 (X.25, Frame Relay) Syntax: <!-- Attribute values for address family --> <!ENTITY % addressFamily "(E164|X121)" > <!ATTLIST address family %addressFamily; #REQUIRED > 6.1.1.2. address Attribute "countryCode" The countryCode attribute indicates the international dialing prefix for the country in which the POP is located. Syntax: <!-- ITU dialing code for the country in which this POP is located --> <!ATTLIST address countryCode CDATA #IMPLIED > 6.1.1.3. address Attribute "areaCode" The areaCode attribute contains the area or city code component of the telephone number in the 'address' element (if any) associated with this POP. <!-- Area or city code component of the telephone number in the accessTelephoneNumber element associated with this POP --> <!ATTLIST address areaCode CDATA #IMPLIED > 6.1.2. Media The media element is a container describing the types of media and related protocols supported by this POP. The following media types are currently defined. Additional types may be registered by IANA in future. Value Media Type -------- ----------- viaMODEM Modem viaISDN ISDN viaATM ATM viaFR Frame Relay viaX25 X.25 Riegel & Zorn Standards Track PAGE 11 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!-- The types of media supported by this POP --> <!ENTITY % mediaTypes "(viaMODEM|viaISDN|viaATM|viaFR|viaX25)+" > <!ELEMENT media %mediaTypes; > 6.1.2.1. Modem Protocols The viaMODEM element is an empty element representing by its optional type attribute the modem protocol supported by the access devices that can be reached at address. To define multiple available protocols this element may be included repeatedly. The initially defined modem protocol types are listed in the table below. Additional values may be registered by IANA in future. Value Duplex Speed Protocol ----- ------ ----- ------------- V21 Full 300 ITU-T V.21 V22 Full 1200 ITU-T V.22 V29 Half 9600 ITU-T V.29 V32 Full 9600 ITU-T V.32 V32B Full 14.4k ITU-T V.32bis V34 Full 28.8k ITU-T V.34 V34B Full 33.6k ITU-T V.34bis V90 Full 56k ITU-T V.90 Syntax <!-- A modem media type element --> <!ENTITY % modemProtocols "(V21|V22|V29|V32|V32B|V34|V34B|V90)" > <!ELEMENT viaMODEM EMPTY> <!ATTLIST viaMODEM type %modemProtocols; #IMPLIED > 6.1.2.2. ISDN Protocols The viaISDN element is an empty element representing by its optional type attribute the ISDN protocol supported by the access devices that can be reached at address. To define multiple available protocols this element may be included repeatedly. The initially defined ISDN protocol types are listed in the table below. Additional values may be registered by IANA in future. Value Speed Meaning ----- ----- ----------- V110L 19.2k ITU-T V.110 V110H 38.4k ITU-T V.110 V120L 56k ITU-T V.120 Riegel & Zorn Standards Track PAGE 12 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 V120H 64k ITU-T V.120 X75 64k ITU-T X.75 HDLC 64k RFC 1618 Syntax: <!-- An ISDN media type element --> <!ENTITY % isdnProtocols "(V110L|V110H|V120L|V120H|X75|HDLC)"> <!ELEMENT viaISDN EMPTY> <!ATTLIST viaISDN type %isdnProtocols; #IMPLIED > 6.1.2.3. ATM Protocols The viaATM element is an empty element representing by its optional type attribute a particular protocol supported by the access devices that can be reached at address. To define multiple available protocols this element may be included repeatedly. Currently only one protocol is defined. Additional values may be registered by IANA in future. Syntax: <!-- An ATM media type element --> <!ENTITY % atmProtocols "(RFC 2364)"> <!ELEMENT viaATM EMPTY> <!ATTLIST viaATM type %atmProtocols; #IMPLIED > 6.1.2.4. Frame Relay Protocols The viaFR element is an empty element representing by its optional type attribute the particular protocol supported by the access devices that can be reached at address. To define multiple available protocols this element may be included repeatedly. Currently only one protocol is defined. Additional values may be registered by IANA in future. Syntax: <!-- A Frame Relay media type element --> <!ENTITY % frProtocols "(RFC 1973)"> <!ELEMENT viaFR EMPTY> <!ATTLIST viaFR type %frProtocols; #IMPLIED > 6.1.2.5. X.25 Protocols The viaX25 element is an empty element representing by its optional type attribute the particular protocol supported by the access devices that can be reached at address. To define multiple available Riegel & Zorn Standards Track PAGE 13 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 protocols this element may be included repeatedly. Currently only one protocol is defined. Additional values may be registered by IANA in future. Syntax: <!-- A X.25 media type element --> <!ENTITY % x25Protocols "(RFC 1598)"> <!ELEMENT viaX25 EMPTY> <!ATTLIST viaX25 type %x25Protocols; #IMPLIED > 6.1.3. Minimum Data Rate The minBitsPerSecond element indicates the minimum data rate (in bits/second) supported by the access devices at the POP. Syntax: <!-- Minimum data rate supported by this POP in bits/second --> <!ELEMENT minBitsPerSecond (#PCDATA)> 6.1.4. Maximum Data Rate The maxBitsPerSecond element indicates the maximum data rate (in bits/second) supported by the access devices at the POP. Syntax: <!-- Maximum data rate supported by this POP in bits/second --> <!ELEMENT maxBitsPerSecond (#PCDATA)> 6.1.5. POP Properties The popProperty element is an empty element representing by its attribute value a particular property of this POP. To define multiple available protocols this element might be included several times. The initially defined properties are listed in the table below. Additional values may be registered by IANA in future. Value Property ------ ---------------------- MPPP Multilink PPP (RFC 1990) MOBIP Mobile IP (RFC 2002) MCRX Multicast Reception MCTX Multicast Transmission Syntax: <!-- A property characterizing this POP --> <!ENTITY % popProperties "(MPPP|MOBIP|MCRX|MCTX)" > Riegel & Zorn Standards Track PAGE 14 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ELEMENT popProperty EMPTY> <!ATTLIST popProperty type %popProperties; #REQUIRED> 6.1.6. Tunneling Protocols The tunnelProto element is an empty element representing by its attribute a tunneling protocol supported by this POP. To define multiple available protocols this element might be included several times. The initially defined values are listed in the table below. Additional values may be registered by IANA in future. Value Protocol ------ ------------------ L2TP RFC 2661 L2TP PPTP RFC 2637 PPTP L2F RFC 2341 L2F ATMP RFC 2107 ATMP AHT RFC 2402 IP AH Tunnel Mode ESPT RFC 2406 IP ESP Tunnel Mode IPIP RFC 1853 IP-IP MIP RFC 2004 Minimal IP-IP GRE RFC 1701 GRE Syntax: <!-- A tunneling protocol supported by this POP --> <!ENTITY % tunnelingProtocols "(L2TP|PPTP|L2F|ATMP|AHT|ESPT|IPIP|MIP|GRE)" > <!ELEMENT tunnelProto EMPTY> <!ATTLIST tunnelProto type %tunnelingProtocols; #REQUIRED> 6.1.7. Dialing Script The dialScript element contains the dialing script to be used when connecting to this POP. The attribute value type of dialScript defines the type of the script that should be used when connecting to this POP. Syntax: <!-- The dial script to be used --> <!ELEMENT dialScript (#PCDATA)> <!ATTLIST dialScript type CDATA #IMPLIED > Riegel & Zorn Standards Track PAGE 15 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 6.1.8. Pricing Information The pricingInformation element is a free-form string representing pricing information for this POP. It may be anything from a simple string indicating relative expense (e.g., "$$$$" for a very expensive POP) to a paragraph describing time-of-day and other differential pricing variables. Syntax: <!-- Pricing information for this POP --> <!ELEMENT pricing (#PCDATA)> 6.1.9. City The city element contains the name of the city in which the POP is located (not the city(s) from which it is accessible by a local call). Syntax: <!-- The name of the city in which this POP is located --> <!ELEMENT city (#PCDATA)> 6.1.10. Region The region element contains the name of the region in which the POP is located. In the United States, this would be the name of a state or (for Washington, D.C.) administrative district. In other countries, it might be the name of a province, parish or county. Syntax: <!-- The name of the region in which this POP is located --> <!ELEMENT region (#PCDATA)> 6.1.11. Country The country element contains the name of the country in which the POP is located. The country name may be abbreviated (e.g., "USA" for the United States of America or "UK" for the United Kingdom) but if abbreviations are used the usage must be consistent within a given phone book. Syntax: <!-- The name of the country in which this POP is located --> <!ELEMENT country (#PCDATA)> Riegel & Zorn Standards Track PAGE 16 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 6.1.12. POP Setup The popSetup element is either a setup element, if setup is specific to this particular POP, or a reference to any of the setup elements given in the outer scope of the phonebook element. Syntax: <!-- Reference for setup information for this POP --> <!ELEMENT setupPtr EMPTY> <!ATTLIST setupPtr setupID IDREFS #IMPLIED> 6.1.13. POP Support The popSupport element is either a support element, if support is specific to this particular POP, or a reference to any of the support elements given in the outer scope of the phonebook element. Syntax: <!-- Reference for support information for this POP --> <!ELEMENT supportPtr EMPTY> <!ATTLIST supportPtr supportID IDREFS #IMPLIED> 6.1.14. POP Provider The popProvider element is either a provider element, if provider information is specific to this particular POP, or a reference to any of the provider elements given in the outer scope of the phonebook element. Syntax: <!-- Reference for provider information for this POP --> <!ELEMENT providerPtr EMPTY> <!ATTLIST providerPtr providerID IDREFS #IMPLIED> 6.2. Information elements defined for the Setup element 6.2.1. DNS Server Address The dnsServerAddress element represents the IP address of the Domain Name Service (DNS) server which should be used when connected to this POP. The address is represented in the form of a string in dotted- decimal notation (e.g., 192.168.101.1). Riegel & Zorn Standards Track PAGE 17 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!-- Domain Name Server IP address --> <!ELEMENT dnsServerAddress (#PCDATA)> <!ATTLIST dnsServerAddress value NOTATION (IPADR) #IMPLIED> 6.2.2. NNTP Server Name The nntpServerName element contains the fully qualified domain name (FQDN) of the Network News Transfer Protocol (NNTP) server which should be used when connected to this POP. Syntax: <!-- Name of an NNTP server --> <!ELEMENT nntpServerName (#PCDATA)> <!ATTLIST nntpServerName value NOTATION (FQDN) #IMPLIED> 6.2.3. SMTP Server Name The smtpServerName element contains the FQDN of the Simple Mail Transfer Protocol (SMTP) server which should be used when connected to this POP. Syntax: <!-- Name of an SMTP mail server --> <!ELEMENT smtpServerName (#PCDATA)> <!ATTLIST smtpServerName value NOTATION (FQDN) #IMPLIED> 6.2.4. POP3 Server Name The popServerName element contains the FQDN of the Post Office Protocol (POP) server which should be used when connected to this POP. Syntax: <!-- Name of an POP3 mail server --> <!ELEMENT popServerName (#PCDATA)> <!ATTLIST popServerName value NOTATION (FQDN) #IMPLIED> 6.2.5. IMAP Server Name The imapServerName element contains the FQDN of the Internet Mail Access Protocol (IMAP) server which should be used when connected to this POP. Riegel & Zorn Standards Track PAGE 18 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!-- Name of an IMAP4 server --> <!ELEMENT imapServerName (#PCDATA)> <!ATTLIST imapServerName value NOTATION (FQDN) #IMPLIED> 6.2.6. WWW Proxy The wwwProxyServerName element contains the FQDN of the World Wide Web (WWW) proxy server which should be used when connected to this POP. Syntax: <!-- Name of an WWW Proxy --> <!ELEMENT wwwProxyServerName (#PCDATA)> <!ATTLIST wwwProxyServerName value NOTATION (FQDN) #IMPLIED> 6.2.7. FTP Proxy The ftpProxyServerName element contains the FQDN of the File Transfer Protocol (FTP) proxy server which should be used when connected to this POP. Syntax: <!-- Name of an FTP Proxy --> <!ELEMENT ftpProxyServerName (#PCDATA)> <!ATTLIST ftpProxyServerName value NOTATION (FQDN) #IMPLIED> 6.2.8. Winsock Proxy The winsockProxyServerName element contains the FQDN of the Windows Socket (Winsock) proxy server which should be used when connected to this POP. Syntax: <!-- Name of an Winsock Proxy --> <!ELEMENT winsockProxyServerName (#PCDATA)> <!ATTLIST winsockProxyServerName value NOTATION (FQDN) #IMPLIED> 6.2.9. Default Gateway Address The defaulttGatewayAddress element represents the address of the default gateway which should be used when connected to this POP. The address is represented in the form of a string in dotted-decimal notation (e.g., 192.168.101.1). Riegel & Zorn Standards Track PAGE 19 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 Syntax: <!-- Default Gateway IP address (in dotted decimal notation) --> <!ELEMENT defaultGatewayAddress (#PCDATA)> <!ATTLIST defaultGatewayAddress value NOTATION (IPADR) #IMPLIED> 6.2.10. User Name Suffix The userNameSuffix element represents a string which should be concatenated to the base username. For example, if the base username is "userA" and the value of this element is "@bigco.com", the resulting augmented username would be "userA@bigco.com". An intelligent dialer may concatenate the string automatically. Note that both the userNameSuffix and the userNamePrefix (below) may be applied to the same base username. Syntax: <!-- User Name suffix --> <!ELEMENT userNameSuffix (#PCDATA)> 6.2.11. User Name Prefix The userNamePrefix element represents a string to which the base username should be concatenated. For example, if the base username is "userB" and the value of this element is "BIGCO/" the resulting augmented username would be "BIGCO/userB". An intelligent dialer may perform the concatenation automatically. Note that both the userNameSuffix (above) and the userNamePrefix may be applied to the same base username. Syntax: <!-- User Name prefix --> <!ELEMENT userNamePrefix (#PCDATA)> 6.3. Information elements defined for the support element 6.3.1. Support Telephone Number The supportTelephoneNumber element contains a number that may be called to reach the support center for a particular provider or POP. This element is basically a string and should contain the entire telephone number in international form, e.g., "+1 425 838 8080". Syntax: <!-- The number to be dialed to contact customer support for this POP or provider --> <!ELEMENT supportTelephoneNumber (#PCDATA)> Riegel & Zorn Standards Track PAGE 20 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 6.3.2. Support Email Address The supportMailtoURL element contains a URL for the provider's customer support email address, e.g., mailto:support@uu.net. This URL could be used to contact customer support personnel regarding non-urgent issues. Syntax: <!-- A Uniform Resource Locator for the provider's customer support email address --> <!ELEMENT supportMailtoURL (#PCDATA)> 6.4. Information elements defined for the provider element 6.4.1. Provider Name The providerName element is a string containing the name of the provider (e.g., "BIGNET Corporation"). Syntax: <!-- The name of the provider --> <!ELEMENT providerName (#PCDATA)> 6.4.2. Provider Icon The providerIcon attribute contains a BASE64 encoded JPEG or GIF image which may be used for 'branding' phone book entries or displayed when dialing. Syntax: <!-- An icon in BASE64 encoded JPEG or GIF format --> <!ELEMENT providerIcon (#PCDATA)> <!ATTLIST providerIcon value NOTATION (B64JPG | B64GIF) #IMPLIED> 6.4.3. Provider's World Wide Web URL The wwwURL element contains a Uniform Resource Locator (URL) for the provider's Web site, for example, http://www.uu.net. Syntax: <!-- A Uniform Resource Locator for the provider's home page --> <!ELEMENT wwwURL (#PCDATA)> Riegel & Zorn Standards Track PAGE 21 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 6.4.4. Provider's Main Email Address The generalMailtoURL element contains a URL for the provider's main email address, for example, mailto:contact@uu.net. This URL could be used for general correspondence, complaints, etc. Syntax: <!-- A Uniform Resource Locator for the provider's email address --> <!ELEMENT generalMailtoURL (#PCDATA)> 6.4.5. Billing Inquiry Email Address The billingMailtoURL element contains a URL for the provider's billing support email address, for example, mailto:billing@uu.net. This URL could be used to for correspondence regarding billing and payment issues. Syntax: <!-- A Uniform Resource Locator for the email address to be used for billing inquiries --> <!ELEMENT billingMailtoURL (#PCDATA)> 6.4.6. Further elements The remainder of the information elements of the provider element are described in principle in [3]. 7. Complete XML DTD for the roaming phone book <?xml version="1.0" encoding="UTF-8"?> <!-- Parameter entity declaration --> <!-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ --> <!-- This section will be maintained by IANA and can be direct referenced by the DTD specification by means of an external parameter entity. --> <!ENTITY % addressFamily "(E164|X121)" > <!ENTITY % mediaTypes "(viaMODEM|viaISDN|viaATM|viaFR|viaX25)+" > <!ENTITY % modemProtocols "(V21|V22|V29|V32|V32B|V34|V34B|V90)" > <!ENTITY % isdnProtocols "(V110L|V110H|V120L|V120H|X75|HDLC)"> <!ENTITY % atmProtocols "(RFC 2364)"> Riegel & Zorn Standards Track PAGE 22 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ENTITY % frProtocols "(RFC 1973)"> <!ENTITY % x25Protocols "(RFC 1598)"> <!ENTITY % popProperties "(MPPP|MOBIP|MCRX|MCTX)" > <!ENTITY % tunnelingProtocols "(L2TP|PPTP|L2F|ATMP|AHT|ESPT|IPIP|MIP|GRE)" > <!ENTITY % popInformation "address, media+, minBitsPerSecond?, maxBitsPerSecond?, popProperty*, tunnelProto*, dialScript?, pricingInformation?, city?, region?, country?, (setup|setupPtr)?, (support|supportPtr)?, (provider|providerPtr)?"> <!ENTITY % setupInformation "dnsServerAddress*, nntpServerName*, smtpServerName*, popServerName*, imapServerName*, wwwProxyServerName*, ftpProxyServerName*, winsockProxyServerName*, defaultGatewayAddress?, userNamePrefix?, userNameSuffix?"> <!ENTITY % supportInformation "(supportTelephoneNumber|supportMailtoURL)+"> <!ENTITY % providerInformation "providerName?, providerIcon?, wwwURL?, generalMailtoURL?, billingMailtoURL?, businessCategory?, Riegel & Zorn Standards Track PAGE 23 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 x121Address?, registeredAddress?, destinationIndicator?, preferredDeliveryMethod?, telexNumber?, teletexTerminalIdentifier?, telephoneNumber?, internationalISDNNumber?, facsimileTelephoneNumber?, street?, postOfficeBox?, postalCode?, postalAddress?, physicalDeliveryOfficeName?, description?, supportPtr*"> <!-- ++++++++++++++ End of IANA maintained section ++++++++++ --> <!-- Phone book value type notation declarations --> <!NOTATION FQDN PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Fully_qualified_domain_name"> <!NOTATION IPADR PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type IP_address"> <!NOTATION B64JPG PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Base64_encoded_jpeg_image"> <!NOTATION B64GIF PUBLIC "-//IETF/roamPhoneBook/NOTATION value Type Base64_encoded_gif_image"> <!-- Phone book element declarations --> <!ELEMENT phoneBook ( pop+, setup*, support*, provider*) > <!ATTLIST phoneBook name CDATA #REQUIRED version CDATA #REQUIRED > <!ELEMENT pop ( %popInformation; )> <!ATTLIST pop entryVersion CDATA #REQUIRED> <!ELEMENT setup ( %setupInformation; )> <!ATTLIST setup id ID #REQUIRED> <!ELEMENT support ( %supportInformation; )> Riegel & Zorn Standards Track PAGE 24 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ATTLIST support id ID #REQUIRED language NMTOKENS #IMPLIED > <!ELEMENT provider ( %providerInformation; )> <!ATTLIST provider id ID #REQUIRED> <!-- Information elements for pop --> <!ELEMENT address (#PCDATA)> <!ATTLIST address family %addressFamily; #REQUIRED countryCode CDATA #IMPLIED areaCode CDATA #IMPLIED > <!ELEMENT media %mediaTypes; > <!ELEMENT viaMODEM EMPTY> <!ATTLIST viaMODEM type %modemProtocols; #IMPLIED > <!ELEMENT viaISDN EMPTY> <!ATTLIST viaISDN type %isdnProtocols; #IMPLIED > <!ELEMENT viaATM EMPTY> <!ATTLIST viaATM type %atmProtocols; #IMPLIED > <!ELEMENT viaFR EMPTY> <!ATTLIST viaFR type %frProtocols; #IMPLIED > <!ELEMENT viaX25 EMPTY> <!ATTLIST viaX25 type %x25Protocols; #IMPLIED > <!ELEMENT minBitsPerSecond (#PCDATA)> <!ELEMENT maxBitsPerSecond (#PCDATA)> <!ELEMENT popProperty EMPTY> <!ATTLIST popProperty type %popProperties; #REQUIRED > <!ELEMENT tunnelProto EMPTY> <!ATTLIST tunnelProto type %tunnelingProtocols; #REQUIRED > Riegel & Zorn Standards Track PAGE 25 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ELEMENT dialScript (#PCDATA)> <!ATTLIST dialScript type CDATA #IMPLIED > <!ELEMENT pricing (#PCDATA)> <!ELEMENT city (#PCDATA)> <!ELEMENT region (#PCDATA)> <!ELEMENT country (#PCDATA)> <!ELEMENT setupPtr EMPTY> <!ATTLIST setupPtr setupID IDREFS #IMPLIED> <!ELEMENT supportPtr EMPTY> <!ATTLIST supportPtr supportID IDREFS #IMPLIED> <!ELEMENT providerPtr EMPTY> <!ATTLIST providerPtr providerID IDREFS #IMPLIED> <!-- Information elements for setup --> <!ELEMENT dnsServerAddress (#PCDATA)> <!ATTLIST dnsServerAddress value NOTATION (IPADR) #IMPLIED> <!ELEMENT nntpServerName (#PCDATA)> <!ATTLIST nntpServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT smtpServerName (#PCDATA)> <!ATTLIST smtpServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT popServerName (#PCDATA)> <!ATTLIST popServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT imapServerName (#PCDATA)> <!ATTLIST imapServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT wwwProxyServerName (#PCDATA)> <!ATTLIST wwwProxyServerName value NOTATION (FQDN) #IMPLIED> Riegel & Zorn Standards Track PAGE 26 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ELEMENT ftpProxyServerName (#PCDATA)> <!ATTLIST ftpProxyServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT winsockProxyServerName (#PCDATA)> <!ATTLIST winsockProxyServerName value NOTATION (FQDN) #IMPLIED> <!ELEMENT defaultGatewayAddress (#PCDATA)> <!ATTLIST defaultGatewayAddress value NOTATION (IPADR) #IMPLIED> <!ELEMENT userNameSuffix (#PCDATA)> <!ELEMENT userNamePrefix (#PCDATA)> <!-- Information elements for support --> <!ELEMENT supportTelephoneNumber (#PCDATA)> <!ELEMENT supportMailtoURL (#PCDATA)> <!-- Information elements for provider --> <!ELEMENT providerName (#PCDATA)> <!ELEMENT providerIcon (#PCDATA)> <!ATTLIST providerIcon value NOTATION (B64JPG|B64GIF) #IMPLIED> <!ELEMENT wwwURL (#PCDATA)> <!ELEMENT generalMailtoURL (#PCDATA)> <!ELEMENT billingMailtoURL (#PCDATA)> <!-- Further provider elements according to RFC 1274 --> <!ELEMENT businessCategory (#PCDATA)> <!ELEMENT x121Address (#PCDATA)> <!ELEMENT registeredAddress (#PCDATA)> <!ELEMENT destinationIndicator (#PCDATA)> <!ELEMENT preferredDeliveryMethod (#PCDATA)> <!ELEMENT telexNumber (#PCDATA)> Riegel & Zorn Standards Track PAGE 27 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 <!ELEMENT teletexTerminalIdentifier (#PCDATA)> <!ELEMENT telephoneNumber (#PCDATA)> <!ELEMENT internationalISDNNumber (#PCDATA)> <!ELEMENT facsimileTelephoneNumber (#PCDATA)> <!ELEMENT street (#PCDATA)> <!ELEMENT postOfficeBox (#PCDATA)> <!ELEMENT postalCode (#PCDATA)> <!ELEMENT postalAddress (#PCDATA)> <!ELEMENT physicalDeliveryOfficeName (#PCDATA)> <!ELEMENT description (#PCDATA)> <!-- end of dtd --> 8. Security Considerations The secure distribution and transport of information of a phone book for roaming applications require a reliable authentication of the issuer of the information as well as means to preserve the integrity of the provided information. No specific elements for security requirements are provided by the phone book XML DTD itself. It is assumed that security of the roaming phone book is provided by means outside of the scope of this specification, such as signing the phone book using pgp. 9. IANA Considerations This specification provides the possibility to define further attribute values for all information elements owning enumerated attribute lists as well as to extend the main structures 'pop', 'setup', 'support' and 'provider' by additional information elements. Therefore the specification of the roaming phone book can be adopted to future requirements without changing this document. Extensions and refinements to this specification can be achieved by registration of new elements and attributes by IANA. Extending this specification with additional attributes or elements must not change the validity of documents based on an older version of the XML DTD. Therefore all added information elements must be Riegel & Zorn Standards Track PAGE 28 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 optional, prohibiting the mandatory inclusion of newly defined information elements. Adding new values to enumerated attribute lists has no backward compatibility constraints because it does not harm the validity of attributes already defined. To facilitate the registration of new information elements and attribute values the DTD of the phone book has been separated in two parts, the extensible part containing only parameter entity declarations for ease inclusion of new values, and the fixed part containing the detailed specification of the content and structure of the phone book. By referencing the parameter entity declarations in the fixed part of the specification the whole phone book becomes extensible. The part containing the parameter entity declarations has to be maintained by the IANA. There are two different classes of declarations in this part requiring different policies for registering new values. 9.1. Registration of new attribute values The entities 'addressFamily', 'modemProtocols', 'isdnProtocols', 'atmProtocols', 'frProtocols', 'x25Protocols', 'popProperties' and 'tunnelingProtocols' are describing enumerated attribute value lists. Because there is no limitation in the name space of these attribute values and newly defined attribute values can not harm the validity of existing values, new attribute values can be assigned by Specification Required [6]. 9.2. Registration of new information elements The entities 'mediaTypes', 'popInformation', 'setupInformation', ' supportInformation' and 'providerInformation' define the information elements probably included in the media, pop, setup, support and provider elements. Inserting new values into these lists extends the phone book by arbitrarily new information elements. Inappropriate use of the XML content model can destroy the backward compatibility of the DTD. Therefore the assignment of new information elements requires the approval of a Designated Expert [6]. In addition to the insertion of a new value into the list, the detailed definition of the information element has to be appended to the specification part maintained by the IANA. Riegel & Zorn Standards Track PAGE 29 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 10. References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [2] Reynolds, J. and J. Postel, "ASSIGNED NUMBERS", STD 2, RFC 1700, October 1994. [3] Barker, P. and S. Kille, "The COSINE and Internet X.500 Schema", RFC 1274, November 1991. [4] ITU Rec. E.123, "Notation for national and international telephone numbers", 1988. [5] "Extensible Markup Language (XML) 1.0" W3C Recommendation 10- February-1998 http://www.w3.org/TR/1998/REC-xml-19980210 [6] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 2434, October 1998. Riegel & Zorn Standards Track PAGE 30 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 11. Appendix: Examples 11.1. The most simple example <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE phoneBook SYSTEM "roamPhoneBook.dtd"> <phoneBook name="minimalExample" version="1"> <pop entryVersion="1"> <address family="E164">+1 234 5678901</address> <media><viaMODEM/></media> </pop> </phoneBook> 11.2. A more comprehensive example <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE phoneBook SYSTEM "roamPhoneBook.dtd"> <phoneBook name="KNF_simple" version="1"> <pop entryVersion="1"> <address family="E164" countryCode="49">+49913130540</address> <media> <viaMODEM type="V90"/> <viaMODEM type="V34B"/> <viaISDN type="HDLC"/> </media> <setup> <dnsServerAddress>192.168.147.5</dnsServerAddress> <dnsServerAddress>193.175.24.33</dnsServerAddress> </setup> </pop> <support id="KNF_main" language="EN DE"> <supportMailtoURL>mailto:support@franken.de</supportMailtoURL> <supportTelephoneNumber>+499123968066</supportTelephoneNumber> </support> </phoneBook> 12. Acknowledgments Thanks to Pat Calhoun, Bernard Aboba, Jay Farhat, Butch Anton, Quentin Miller, and Ken Crocker for salient input and review. Riegel & Zorn Standards Track PAGE 31 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 13. Authors' Addresses Questions about this memo can be directed to: Max Riegel Siemens AG Hofmannstr. 51 Munich, 81359 Germany Phone: +49 89 722 49557 EMail: maximilian.riegel@icn.siemens.de Glen Zorn Cisco Systems, Inc. 500 108th Avenue N.E., Suite 500 Bellevue, WA 98004 USA Phone: +1 425 438 8218 EMail: gwz@cisco.com Riegel & Zorn Standards Track PAGE 32 top

RFC 3017 Roaming Access Phone Book XML DTD December 2000 14. Full Copyright Statement Copyright © The Internet Society (2000). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Riegel & Zorn Standards Track PAGE 33 top

XML DTD for Roaming Access Phone Book RFC TOTAL SIZE: 59762 bytes PUBLICATION DATE: Monday, December 4th, 2000 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 3017: The IETF Trust, Monday, December 4th, 2000
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement