The RFC Archive
 The RFC Archive   RFC 4372   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 4372

Chargeable User Identity

Last modified on Tuesday, January 24th, 2006

Permanent link to RFC 4372
Search GitHub Wiki for RFC 4372
Show other RFCs mentioning RFC 4372







Network Working Group                                         F. Adrangi
Request for Comments: 4372                                         Intel
Category: Standards Track                                      A. Lior
                                                     Bridgewater Systems
                                                             J. Korhonen
                                                             Teliasonera
                                                             J. Loughney
                                                                   Nokia
                                                            January 2006


                        Chargeable User Identity

 Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Copyright Notice

   Copyright © The Internet Society (2006).

 Abstract

   This document describes a new Remote Authentication Dial-In User
   Service (RADIUS) attribute, Chargeable-User-Identity.  This attribute
   can be used by a home network to identify a user for the purpose of
   roaming transactions that occur outside of the home network.

 Table of Contents

   1. Introduction ....................................................2
      1.1. Motivation .................................................3
      1.2. Terminology ................................................4
   2. Operation .......................................................5
      2.1. Chargeable-User-Identity (CUI) Attribute ...................5
      2.2. CUI Attribute ..............................................6
   3. Attribute Table .................................................7
   4. Diameter Consideration ..........................................7
   5. IANA Considerations .............................................7
   6. Security Considerations .........................................7
   7. Acknowledgements ................................................8
   8. References ......................................................8
      8.1. Normative References .......................................8
      8.2. Informative References .....................................8



Adrangi, et al.             Standards Track                  PAGE 1 top


RFC 4372 Chargeable User Identity January 2006 1. Introduction Some authentication methods, including EAP-PEAP, EAP-TTLS, EAP-SIM and EAP-AKA, can hide the true identity of the user from RADIUS servers outside of the user's home network. In these methods, the User-Name(1) attribute contains an anonymous identity (e.g., @example.com) sufficient to route the RADIUS packets to the home network but otherwise insufficient to identify the user. While this mechanism is good practice in some circumstances, there are problems if local and intermediate networks require a surrogate identity to bind the current session. This document introduces an attribute that serves as an alias or handle (hereafter, it is called Chargeable-User-Identity) to the real user's identity. Chargeable-User-Identity can be used outside the home network in scenarios that traditionally relied on User-Name(1) to correlate a session to a user. For example, local or intermediate networks may limit the number of simultaneous sessions for specific users; they may require a Chargeable-User-Identity in order to demonstrate willingness to pay or otherwise limit the potential for fraud. This implies that a unique identity provided by the home network should be able to be conveyed to all parties involved in the roaming transaction for correlating the authentication and accounting packets. Providing a unique identity, Chargeable-User-Identity (CUI), to intermediaries, is necessary to fulfill certain business needs. This should not undermine the anonymity of the user. The mechanism provided by this document allows the home operator to meet these business requirements by providing a temporary identity representing the user and at the same time protecting the anonymity of the user. When the home network assigns a value to the CUI, it asserts that this value represents a user in the home network. The assertion should be temporary -- long enough to be useful for the external applications and not too long such that it can be used to identify the user. Several organizations, including WISPr, GSMA, 3GPP, Wi-Fi Alliance, and IRAP, have been studying mechanisms to provide roaming services, using RADIUS. Missing elements include mechanisms for billing and fraud prevention. Adrangi, et al. Standards Track PAGE 2 top

RFC 4372 Chargeable User Identity January 2006 The CUI attribute is intended to close operational loopholes in RADIUS specifications that have impacted roaming solutions negatively. Use of the CUI is geared toward EAP methods supporting privacy (such as PEAP and EAP-TTLS), which are, for the most part, recent deployments. A chargeable identity reflecting the user profile by the home network is needed in such roaming scenarios. 1.1. Motivation Some other mechanisms have been proposed in place of the CUI attribute. These mechanisms are insufficient or cause other problems. It has been suggested that standard RADIUS Class(25) or User-Name(1) attributes could be used to indicate the CUI. However, in a complex global roaming environment where there could be one or more intermediaries between the NAS [RFC 4282] and the home RADIUS server, the use of aforementioned attributes could lead to problems as described below. - On the use of RADIUS Class(25) attribute: [RFC 2865] states: "This Attribute is available to be sent by the server to the client in an Access-Accept packet and SHOULD be sent unmodified by the client to the accounting server as part of the Accounting-Request packet if accounting is supported. The client MUST NOT interpret the attribute locally." So RADIUS clients or intermediaries MUST NOT interpret the Class(25) attribute, which precludes determining whether it contains a CUI. Additionally, there could be multiple class attributes in a RADIUS packet, and since the contents of Class(25) attribute is not to be interpreted by clients, this makes it hard for the entities outside the home network to determine which one contains the CUI. - On the use of RADIUS User-Name(1) attribute: The User-Name(1) attribute included in the Access-Request packet may be used for the purpose of routing the Access-Request packet, and in the process may be rewritten by intermediaries. As a result, a RADIUS server receiving an Access-Request packet relayed by a proxy cannot assume that the User-Name(1) attribute remained unmodified. On the other hand, rewriting of a User-Name(1) attribute sent within an Access-Accept packet occurs more rarely, since a Proxy-State(33) attribute can be used to route the Access-Accept packet without parsing the User-Name(1) attribute. As a result, a RADIUS server cannot assume that a proxy stripping routing information from a User-Name(1) attribute within an Access-Request packet will add this information to a User-Name(1) attribute Adrangi, et al. Standards Track PAGE 3 top

RFC 4372 Chargeable User Identity January 2006 included within an Access-Accept packet. The result is that when a User-Name(1) attribute is sent in an Access-Accept packet, it is possible that the Access-Request packet and Accounting-Request packets will follow different paths. Where this outcome is undesirable, the RADIUS client should use the original User-Name(1) in accounting packets. Therefore, another mechanism is required to convey a CUI within an Access-Accept packet to the RADIUS client, so that the CUI can be included in the accounting packets. The CUI attribute provides a solution to the above problems and avoids overloading RADIUS User-Name(1) attribute or changing the usage of existing RADIUS Class(25) attribute. The CUI therefore provides a standard approach to billing and fraud prevention when EAP methods supporting privacy are used. It does not solve all related problems, but does provide for billing and fraud prevention. 1.2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC 2119]. The following acronyms are used: 3GPP - Third Generation Partnership Project AAA - Authentication, Authorization, and Accounting AKA - Authentication and Key Agreement CUI - Chargeable-User-Identity GSMA - GSM Association IRAP - International Roaming Access Protocols Program NAS - Network Access Server PEAP - Protected Extensible Authentication Protocol SIM - Subscriber Identity Modules TTLS - Tunneled Transport Layer Security WISPr - Wireless ISP Roaming WPA - Wi-Fi Protected Access Adrangi, et al. Standards Track PAGE 4 top

RFC 4372 Chargeable User Identity January 2006 2. Operation This document assumes that the RADIUS protocol operates as specified in [RFC 2865] and [RFC 2866], dynamic authorization as specified in [RFC 3576], and the Diameter protocol as specified in [RFC 3588]. 2.1. Chargeable-User-Identity (CUI) Attribute The CUI attribute serves as an alias to the user's real identity, representing a chargeable identity as defined and provided by the home network as a supplemental or alternative information to User-Name(1). Typically, the CUI represents the identity of the actual user, but it may also indicate other chargeable identities such as a group of users. RADIUS clients (proxy or NAS) outside the home network MUST NOT modify the CUI attribute. The RADIUS server (a RADIUS proxy, home RADIUS server) may include the CUI attribute in the Access-Accept packet destined to a roaming partner. The CUI support by RADIUS infrastructure is driven by the business requirements between roaming entities. Therefore, a RADIUS server supporting this specification may choose not to send the CUI in response to an Access-Request packet from a given NAS, even if the NAS has indicated that it supports CUI. If an Access-Accept packet without the CUI attribute was received by a RADIUS client that requested the CUI attribute, then the Access-Accept packet MAY be treated as an Access-Reject. If the CUI was included in an Access-Accept packet, RADIUS clients supporting the CUI attribute MUST ensure that the CUI attribute appears in the RADIUS Accounting-Request (Start, Interim, and Stop). This requirement applies regardless of whether the RADIUS client requested the CUI attribute. RFC 2865 includes the following statements about behaviors of RADIUS client and server with respect to unsupported attributes: - "A RADIUS client MAY ignore Attributes with an unknown Type." - "A RADIUS server MAY ignore Attributes with an unknown Type." Therefore, RADIUS clients or servers that do not support the CUI may ignore the attribute. A RADIUS client requesting the CUI attribute in an Access-Accept packet MUST include within the Access-Request packet a CUI attribute. For the initial authentication, the CUI attribute will include a single NUL character (referred to as a nul CUI). And, during Adrangi, et al. Standards Track PAGE 5 top

RFC 4372 Chargeable User Identity January 2006 re-authentication, the CUI attribute will include a previously received CUI value (referred to as a non-nul CUI value) in the Access-Accept. Upon receiving a non-nul CUI value in an Access-Request, the home RADIUS server MAY verify that the value of CUI matches the CUI from the previous Access-Accept. If the verification fails, then the RADIUS server SHOULD respond with an Access-Reject message. If a home RADIUS server that supports the CUI attribute receives an Access-Request packet containing a CUI (set to nul or otherwise), it MUST include the CUI attribute in the Access-Accept packet. Otherwise, if the Access-Request packet does not contain a CUI, the home RADIUS server SHOULD NOT include the CUI attribute in the Access-Accept packet. The Access-Request may be sent either in the initial authentication or during re-authentication. A NAS that requested the CUI during re-authentication by including the CUI in the Access-Request will receive the CUI in the Access-Accept. The NAS MUST include the value of that CUI in all Accounting Messages. 2.2. CUI Attribute A summary of the RADIUS CUI attribute is given below. 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | String... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 89 for Chargeable-User-Identity. Length: >= 3 String: The string identifies the CUI of the end-user. This string value is a reference to a particular user. The format and content of the string value are determined by the Home RADIUS server. The binding lifetime of the reference to the user is determined based on business agreements. For example, the lifetime can be set to one billing period. RADIUS entities other than the Home RADIUS server MUST treat the CUI content as an opaque token, and SHOULD NOT perform operations on its content other than a binary equality comparison test, between two instances of CUI. In cases where the Adrangi, et al. Standards Track PAGE 6 top

RFC 4372 Chargeable User Identity January 2006 attribute is used to indicate the NAS support for the CUI, the string value contains a nul character. 3. Attribute Table The following table provides a guide to which attribute(s) may be found in which kinds of packets, and in what quantity. Request Accept Reject Challenge Accounting # Attribute Request 0-1 0-1 0 0 0-1 89 Chargeable-User-Identity Note: If the Access-Accept packet contains CUI, then the NAS MUST include the CUI in Accounting Requests (Start, Interim, and Stop) packets. 4. Diameter Consideration Diameter needs to define an identical attribute with the same Type value. The CUI should be available as part of the NASREQ application [RFC 4005]. 5. IANA Considerations This document uses the RADIUS [RFC 2865] namespace; see http://www.iana.org/assignments/radius-types. The IANA has assigned a new RADIUS attribute number for the CUI attribute. CUI 89 6. Security Considerations It is strongly recommended that the CUI format used is such that the real user identity is not revealed. Furthermore, where a reference is used to a real user identity, it is recommended that the binding lifetime of that reference to the real user be kept as short as possible. The RADIUS entities (RADIUS proxies and clients) outside the home network MUST NOT modify the CUI or insert a CUI in an Access-Accept. However, there is no way to detect or prevent this. Attempting theft of service, a man-in-the-middle may try to insert, modify, or remove the CUI in the Access-Accept packets and Accounting packets. However, RADIUS Access-Accept and Accounting packets already provide integrity protection. Adrangi, et al. Standards Track PAGE 7 top

RFC 4372 Chargeable User Identity January 2006 If the NAS includes CUI in an Access-Request packet, a man-in-the-middle may remove it. This will cause the Access-Accept packet to not include a CUI attribute, which may cause the NAS to reject the session. To prevent such a denial of service (DoS) attack, the NAS SHOULD include a Message-Authenticator(80) attribute within Access-Request packets containing a CUI attribute. 7. Acknowledgements The authors would like to thank Jari Arkko, Bernard Aboba, David Nelson, Barney Wolff, Blair Bullock, Sami Ala-Luukko, Lothar Reith, David Mariblanca, Eugene Chang, Greg Weber, and Mark Grayson for their feedback and guidance. 8. References 8.1. Normative References [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC 2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote Authentication Dial In User Service (RADIUS)", RFC 2865, June 2000. [RFC 2866] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000. [RFC 4005] Calhoun, P., Zorn, G., Spence, D., and D. Mitton, "Diameter Network Access Server Application", RFC 4005, August 2005. [RFC 4282] Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The Network Access Identifier", RFC 4282, December 2005. 8.2. Informative References [RFC 3576] Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B. Aboba, "Dynamic Authorization Extensions to Remote Authentication Dial In User Service (RADIUS)", RFC 3576, July 2003. [RFC 3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, "Diameter Base Protocol", RFC 3588, September 2003. Adrangi, et al. Standards Track PAGE 8 top

RFC 4372 Chargeable User Identity January 2006 Authors' Addresses Farid Adrangi Intel Corporation 2111 N.E. 25th Avenue Hillsboro, OR 97124 USA Phone: +1 503-712-1791 EMail: farid.adrangi@intel.com Avi Lior Bridgewater Systems Corporation 303 Terry Fox Drive Ottawa, Ontario K2K 3J1 Canada Phone: +1 613-591-9104 EMail: avi@bridgewatersystems.com Jouni Korhonen Teliasonera Corporation P.O.Box 970 FIN-00051, Sonera Finland Phone: +358405344455 EMail: jouni.korhonen@teliasonera.com John Loughney Nokia Itamerenkatu 11-13 FIN-00180, Helsinki Finland Phone: +358504836342 EMail: john.loughney@nokia.com Adrangi, et al. Standards Track PAGE 9 top

RFC 4372 Chargeable User Identity January 2006 Full Copyright Statement Copyright © The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Adrangi, et al. Standards Track PAGE 10 top

Chargeable User Identity RFC TOTAL SIZE: 21555 bytes PUBLICATION DATE: Tuesday, January 24th, 2006 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 4372: The IETF Trust, Tuesday, January 24th, 2006
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement