The RFC Archive
 The RFC Archive   RFC 996   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 996

Statistics server

Last modified on Friday, February 27th, 1987

Permanent link to RFC 996
Search GitHub Wiki for RFC 996
Show other RFCs mentioning RFC 996


Network Working Group                                         D.L. Mills
Request for Comments: 996                         University of Delaware
                                                           February 1987


                           Statistics Server

 STATUS OF THIS MEMO

   This RFC specifies a standard for the ARPA Internet community. Hosts
   and gateways on the DARPA Internet that choose to implement a remote
   statistics monitoring facility may use this protocol to send
   statistics data upon request to a monitoring center or debugging
   host.  Distribution of this memo is unlimited.

DISCUSSION

   Many host and gateway implementations include a facility which
   records traffic statistics, such as packet counters, error counters
   and significant event counters for debugging and performance
   evluation.  Simple data-access and formatting programs can be used to
   display these statistics along with the status of connections, etc.
   Several operating systems, including the various Unix systems and
   Fuzzball systems, already provide extensive facilities to capture and
   display these data for local users and/or operators.

   In many instances it is highly useful to observe statistics data on
   remote hosts and gateways from a monitoring center or debugging host.
   Indeed, several protocols have been implemented and used expressly
   for this purpose [1-6]. In many cases the data can be retrieved using
   conventional services such as remote login or even file transfer.
   However, use of these heavyweight mechanisms is awkward and intrusive
   if conducted on a regular, frequent basis and may involve substantial
   intrusion in the operating system if retrofitted to existing systems.

   The Statistics Server (STATSRV) protocol is intended as a lightweight
   mechanism similar in spirit to NETSTAT [7] and complementary to it.
   STATSRV is designed to capture statistics data with minimal intrusion
   on existing systems or networks. It is intended for use with existing
   hosts and gateways primarily for casual monitoring and debugging
   purposes. It is not intended as a full-function monitoring protocol
   [1,5,6] providing detailed, standardized reports suitable for machine
   analysis, for example, but could be useful in exploratory development
   leading to enduring systems of this type.

   The STATSRV model is based on the native host command language used
   for statistics monitoring and display. The client sends a null-
   terminated ASCII command to the server, which then responds with a
   null-terminated ASCII response suitable for a printer or CRT display.
   Although in principle STATSRV could be used over TCP, it is less
   intrusive and more efficient to use it over UDP. In the case of UDP,



D. L. Mills                                                  PAGE 1 top


RFC 996 February 1987 commands and responses must fit into a single 576-octet IP datagram. In both UDP and TCP the assigned port number is 133 (decimal). As is conventional in other lightweight services of this type (NETSTAT, FINGER, etc.), there is no provision for access control or authentication in STATSRV. If necessary, each command could include a password or other mechanism to discourage casual abuse. EXAMPLE The Fuzzball system includes many local commands to display internal data structures, including one that produces the following billboard for each network device, in this case "dm0" on host "udel2.udel.edu": Process type: 000027 options: 040000 Subnet: DMV status: 376 hello: 15 timeout: 2000 Foreign address: [192.5.39.87] max size: 576 Input packets 3645 Output packets 3690 bad format 0 ICMP msgs 0 bad checksum 0 Input errors 0 returned 0 Output errors 0 dropped 2 No buffer 0 HELLO msgs 2286 Preempted 0 The same billboard is returned as a null-terminated ASCII string in a UDP datagram by sending the null-terminated ASCII command "dm0" in a UDP datagram to the host. Similar billboards can be produced for most processes in the system. Unix programs and shell scripts have been built which send commands like these to selected hosts on a periodic basis in order to construct a simple, ad-hoc monitoring facility. REFERENCES [1] Flood Page, D.,"Gateway Monitoring Protocol", DARPA Network Working Group Report IEN-131, Bolt Beranek and Newman, February 1980. [2] Flood Page, D., "The CMCC Terminal Process", DARPA Network Working Group Report IEN-132, Bolt Beranek and Newman, February 1980. [3] Flood Page, D., "CMCC Performance Measurement Message Formats", DARPA Network Working Group Report IEN-157, Bolt Beranek and Newman, September 1980. [4] Jones, R.G., " A Proposal for Simple Measurement Support for Users", DARPA Network Working Group Report IEN-161, University College London, November 1980. D. L. Mills PAGE 2 top

RFC 996 February 1987 [5] Littauer, B.M., A.J. Huang and R.M. Hinden," A Host Monitoring Protocol", DARPA Network Working Group Report IEN-197, Bolt Beranek and Newman, September 1981. [6] Hinden, R.M.," A Host Monitoring Protocol", DARPA Network Working Group Report RFC 869, BBN Communications Corporation, December 1983. [7] Reynolds, J.K., and J. Postel, "Assigned Numbers", DARPA Network Working Group Report RFC 990, USC Information Sciences Institute, November 1986. D. L. Mills PAGE 3 top

Statistics server RFC TOTAL SIZE: 5952 bytes PUBLICATION DATE: Friday, February 27th, 1987 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 996: The IETF Trust, Friday, February 27th, 1987
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement