The RFC Archive
 The RFC Archive   RFC 4121   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 4121

The Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Mechanism: Version 2

Last modified on Thursday, July 14th, 2005

Permanent link to RFC 4121
Search GitHub Wiki for RFC 4121
Show other RFCs mentioning RFC 4121







Network Working Group                                             L. Zhu
Request for Comments: 4121                                 K. Jaganathan
Updates: 1964                                                  Microsoft
Category: Standards Track                                   S. Hartman
                                                                     MIT
                                                               July 2005


                        The Kerberos Version 5
   Generic Security Service Application Program Interface (GSS-API)
                         Mechanism: Version 2

 Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

 Copyright Notice

   Copyright © The Internet Society (2005).

 Abstract

   This document defines protocols, procedures, and conventions to be
   employed by peers implementing the Generic Security Service
   Application Program Interface (GSS-API) when using the Kerberos
   Version 5 mechanism.

   RFC 1964 is updated and incremental changes are proposed in response
   to recent developments such as the introduction of Kerberos
   cryptosystem framework.  These changes support the inclusion of new
   cryptosystems, by defining new per-message tokens along with their
   encryption and checksum algorithms based on the cryptosystem
   profiles.














Zhu, et al.                 Standards Track                  PAGE 1 top


RFC 4121 Kerberos Version 5 GSS-API July 2005 Table of Contents 1. Introduction ....................................................2 2. Key Derivation for Per-Message Tokens ...........................4 3. Quality of Protection ...........................................4 4. Definitions and Token Formats ...................................5 4.1. Context Establishment Tokens ...............................5 4.1.1. Authenticator Checksum ..............................6 4.2. Per-Message Tokens .........................................9 4.2.1. Sequence Number .....................................9 4.2.2. Flags Field .........................................9 4.2.3. EC Field ...........................................10 4.2.4. Encryption and Checksum Operations .................10 4.2.5. RRC Field ..........................................11 4.2.6. Message Layouts ....................................12 4.3. Context Deletion Tokens ...................................13 4.4. Token Identifier Assignment Considerations ................13 5. Parameter Definitions ..........................................14 5.1. Minor Status Codes ........................................14 5.1.1. Non-Kerberos-specific Codes ........................14 5.1.2. Kerberos-specific Codes ............................15 5.2. Buffer Sizes ..............................................15 6. Backwards Compatibility Considerations .........................15 7. Security Considerations ........................................16 8. Acknowledgements................................................17 9. References .....................................................18 9.1. Normative References ......................................18 9.2. Informative References ....................................18 1. Introduction [RFC 3961] defines a generic framework for describing encryption and checksum types to be used with the Kerberos protocol and associated protocols. [RFC 1964] describes the GSS-API mechanism for Kerberos Version 5. It defines the format of context establishment, per-message and context deletion tokens, and uses algorithm identifiers for each cryptosystem in per-message and context deletion tokens. The approach taken in this document obviates the need for algorithm identifiers. This is accomplished by using the same encryption algorithm, specified by the crypto profile [RFC 3961] for the session key or subkey that is created during context negotiation, and its required checksum algorithm. Message layouts of the per-message tokens are therefore revised to remove algorithm indicators and to add extra information to support the generic crypto framework [RFC 3961]. Zhu, et al. Standards Track PAGE 2 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 Tokens transferred between GSS-API peers for security context establishment are also described in this document. The data elements exchanged between a GSS-API endpoint implementation and the Kerberos Key Distribution Center (KDC) [RFC 4120] are not specific to GSS-API usage and are therefore defined within [RFC 4120] rather than this specification. The new token formats specified in this document MUST be used with all "newer" encryption types [RFC 4120] and MAY be used with encryption types that are not "newer", provided that the initiator and acceptor know from the context establishment that they can both process these new token formats. "Newer" encryption types are those which have been specified along with or since the new Kerberos cryptosystem specification [RFC 3961], as defined in section 3.1.3 of [RFC 4120]. The list of not-newer encryption types is as follows [RFC 3961]: Encryption Type Assigned Number ---------------------------------------------- des-cbc-crc 1 des-cbc-md4 2 des-cbc-md5 3 des3-cbc-md5 5 des3-cbc-sha1 7 dsaWithSHA1-CmsOID 9 md5WithRSAEncryption-CmsOID 10 sha1WithRSAEncryption-CmsOID 11 rc2CBC-EnvOID 12 rsaEncryption-EnvOID 13 rsaES-OAEP-ENV-OID 14 des-ede3-cbc-Env-OID 15 des3-cbc-sha1-kd 16 rc4-hmac 23 Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC 2119]. The term "little-endian order" is used for brevity to refer to the least-significant-octet-first encoding, while the term "big-endian order" is for the most-significant-octet-first encoding. Zhu, et al. Standards Track PAGE 3 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 2. Key Derivation for Per-Message Tokens To limit the exposure of a given key, [RFC 3961] adopted "one-way" "entropy-preserving" derived keys, from a base key or protocol key, for different purposes or key usages. This document defines four key usage values below that are used to derive a specific key for signing and sealing messages from the session key or subkey [RFC 4120] created during the context establishment. Name Value ------------------------------------- KG-USAGE-ACCEPTOR-SEAL 22 KG-USAGE-ACCEPTOR-SIGN 23 KG-USAGE-INITIATOR-SEAL 24 KG-USAGE-INITIATOR-SIGN 25 When the sender is the context acceptor, KG-USAGE-ACCEPTOR-SIGN is used as the usage number in the key derivation function for deriving keys to be used in MIC tokens (as defined in section 4.2.6.1). KG-USAGE-ACCEPTOR-SEAL is used for Wrap tokens (as defined in section 4.2.6.2). Similarly, when the sender is the context initiator, KG-USAGE-INITIATOR-SIGN is used as the usage number in the key derivation function for MIC tokens, while KG-USAGE-INITIATOR-SEAL is used for Wrap tokens. Even if the Wrap token does not provide for confidentiality, the same usage values specified above are used. During the context initiation and acceptance sequence, the acceptor MAY assert a subkey in the AP-REP message. If the acceptor asserts a subkey, the base key is the acceptor-asserted subkey and subsequent per-message tokens MUST be flagged with "AcceptorSubkey", as described in section 4.2.2. Otherwise, if the initiator asserts a subkey in the AP-REQ message, the base key is this subkey; if the initiator does not assert a subkey, the base key is the session key in the service ticket. 3. Quality of Protection The GSS-API specification [RFC 2743] provides Quality of Protection (QOP) values that can be used by applications to request a certain type of encryption or signing. A zero QOP value is used to indicate the "default" protection; applications that do not use the default QOP are not guaranteed to be portable across implementations, or even to inter-operate with different deployment configurations of the same implementation. Using a different algorithm than the one for which the key is defined may not be appropriate. Therefore, when the new method in this document is used, the QOP value is ignored. Zhu, et al. Standards Track PAGE 4 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 The encryption and checksum algorithms in per-message tokens are now implicitly defined by the algorithms associated with the session key or subkey. Therefore, algorithm identifiers as described in [RFC 1964] are no longer needed and are removed from the new token headers. 4. Definitions and Token Formats This section provides terms and definitions, as well as descriptions for tokens specific to the Kerberos Version 5 GSS-API mechanism. 4.1. Context Establishment Tokens All context establishment tokens emitted by the Kerberos Version 5 GSS-API mechanism SHALL have the framing described in section 3.1 of [RFC 2743], as illustrated by the following pseudo-ASN.1 structures: GSS-API DEFINITIONS ::= BEGIN MechType ::= OBJECT IDENTIFIER -- representing Kerberos V5 mechanism GSSAPI-Token ::= -- option indication (delegation, etc.) indicated within -- mechanism-specific token [APPLICATION 0] IMPLICIT SEQUENCE { thisMech MechType, innerToken ANY DEFINED BY thisMech -- contents mechanism-specific -- ASN.1 structure not required } END The innerToken field starts with a two-octet token-identifier (TOK_ID) expressed in big-endian order, followed by a Kerberos message. Following are the TOK_ID values used in the context establishment tokens: Token TOK_ID Value in Hex ----------------------------------------- KRB_AP_REQ 01 00 KRB_AP_REP 02 00 KRB_ERROR 03 00 Zhu, et al. Standards Track PAGE 5 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 Where Kerberos message KRB_AP_REQUEST, KRB_AP_REPLY, and KRB_ERROR are defined in [RFC 4120]. If an unknown token identifier (TOK_ID) is received in the initial context establishment token, the receiver MUST return GSS_S_CONTINUE_NEEDED major status, and the returned output token MUST contain a KRB_ERROR message with the error code KRB_AP_ERR_MSG_TYPE [RFC 4120]. 4.1.1. Authenticator Checksum The authenticator in the KRB_AP_REQ message MUST include the optional sequence number and the checksum field. The checksum field is used to convey service flags, channel bindings, and optional delegation information. The checksum type MUST be 0x8003. When delegation is used, a ticket-granting ticket will be transferred in a KRB_CRED message. This ticket SHOULD have its forwardable flag set. The EncryptedData field of the KRB_CRED message [RFC 4120] MUST be encrypted in the session key of the ticket used to authenticate the context. The authenticator checksum field SHALL have the following format: Octet Name Description ----------------------------------------------------------------- 0..3 Lgth Number of octets in Bnd field; Represented in little-endian order; Currently contains hex value 10 00 00 00 (16). 4..19 Bnd Channel binding information, as described in section 4.1.1.2. 20..23 Flags Four-octet context-establishment flags in little-endian order as described in section 4.1.1.1. 24..25 DlgOpt The delegation option identifier (=1) in little-endian order [optional]. This field and the next two fields are present if and only if GSS_C_DELEG_FLAG is set as described in section 4.1.1.1. 26..27 Dlgth The length of the Deleg field in little-endian order [optional]. 28..(n-1) Deleg A KRB_CRED message (n = Dlgth + 28) [optional]. n..last Exts Extensions [optional]. The length of the checksum field MUST be at least 24 octets when GSS_C_DELEG_FLAG is not set (as described in section 4.1.1.1), and at least 28 octets plus Dlgth octets when GSS_C_DELEG_FLAG is set. When Zhu, et al. Standards Track PAGE 6 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 GSS_C_DELEG_FLAG is set, the DlgOpt, Dlgth, and Deleg fields of the checksum data MUST immediately follow the Flags field. The optional trailing octets (namely the "Exts" field) facilitate future extensions to this mechanism. When delegation is not used, but the Exts field is present, the Exts field starts at octet 24 (DlgOpt, Dlgth and Deleg are absent). Initiators that do not support the extensions MUST NOT include more than 24 octets in the checksum field (when GSS_C_DELEG_FLAG is not set) or more than 28 octets plus the KRB_CRED in the Deleg field (when GSS_C_DELEG_FLAG is set). Acceptors that do not understand the Extensions MUST ignore any octets past the Deleg field of the checksum data (when GSS_C_DELEG_FLAG is set) or past the Flags field of the checksum data (when GSS_C_DELEG_FLAG is not set). 4.1.1.1. Checksum Flags Field The checksum "Flags" field is used to convey service options or extension negotiation information. The following context establishment flags are defined in [RFC 2744]. Flag Name Value --------------------------------- GSS_C_DELEG_FLAG 1 GSS_C_MUTUAL_FLAG 2 GSS_C_REPLAY_FLAG 4 GSS_C_SEQUENCE_FLAG 8 GSS_C_CONF_FLAG 16 GSS_C_INTEG_FLAG 32 Context establishment flags are exposed to the calling application. If the calling application desires a particular service option, then it requests that option via GSS_Init_sec_context() [RFC 2743]. If the corresponding return state values [RFC 2743] indicate that any of the above optional context level services will be active on the context, the corresponding flag values in the table above MUST be set in the checksum Flags field. Flag values 4096..524288 (2^12, 2^13, ..., 2^19) are reserved for use with legacy vendor-specific extensions to this mechanism. Zhu, et al. Standards Track PAGE 7 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 All other flag values not specified herein are reserved for future use. Future revisions of this mechanism may use these reserved flags and may rely on implementations of this version to not use such flags in order to properly negotiate mechanism versions. Undefined flag values MUST be cleared by the sender, and unknown flags MUST be ignored by the receiver. 4.1.1.2. Channel Binding Information These tags are intended to be used to identify the particular communications channel for which the GSS-API security context establishment tokens are intended, thus limiting the scope within which an intercepted context establishment token can be reused by an attacker (see [RFC 2743], section 1.1.6). When using C language bindings, channel bindings are communicated to the GSS-API using the following structure [RFC 2744]: typedef struct gss_channel_bindings_struct { OM_uint32 initiator_addrtype; gss_buffer_desc initiator_address; OM_uint32 acceptor_addrtype; gss_buffer_desc acceptor_address; gss_buffer_desc application_data; } *gss_channel_bindings_t; The member fields and constants used for different address types are defined in [RFC 2744]. The "Bnd" field contains the MD5 hash of channel bindings, taken over all non-null components of bindings, in order of declaration. Integer fields within channel bindings are represented in little- endian order for the purposes of the MD5 calculation. In computing the contents of the Bnd field, the following detailed points apply: (1) For purposes of MD5 hash computation, each integer field and input length field SHALL be formatted into four octets, using little-endian octet ordering. (2) All input length fields within gss_buffer_desc elements of a gss_channel_bindings_struct even those which are zero-valued, SHALL be included in the hash calculation. The value elements of gss_buffer_desc elements SHALL be dereferenced, and the resulting data SHALL be included within the hash computation, only for the case of gss_buffer_desc elements having non-zero length specifiers. Zhu, et al. Standards Track PAGE 8 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 (3) If the caller passes the value GSS_C_NO_BINDINGS instead of a valid channel binding structure, the Bnd field SHALL be set to 16 zero-valued octets. If the caller to GSS_Accept_sec_context [RFC 2743] passes in GSS_C_NO_CHANNEL_BINDINGS [RFC 2744] as the channel bindings, then the acceptor MAY ignore any channel bindings supplied by the initiator, returning success even if the initiator did pass in channel bindings. If the application supplies, in the channel bindings, a buffer with a length field larger than 4294967295 (2^32 - 1), the implementation of this mechanism MAY choose to reject the channel bindings altogether, using major status GSS_S_BAD_BINDINGS [RFC 2743]. In any case, the size of channel-binding data buffers that can be used (interoperable, without extensions) with this specification is limited to 4294967295 octets. 4.2. Per-Message Tokens Two classes of tokens are defined in this section: (1) "MIC" tokens, emitted by calls to GSS_GetMIC() and consumed by calls to GSS_VerifyMIC(), and (2) "Wrap" tokens, emitted by calls to GSS_Wrap() and consumed by calls to GSS_Unwrap(). These new per-message tokens do not include the generic GSS-API token framing used by the context establishment tokens. These new tokens are designed to be used with newer crypto systems that can have variable-size checksums. 4.2.1. Sequence Number To distinguish intentionally-repeated messages from maliciously- replayed ones, per-message tokens contain a sequence number field, which is a 64 bit integer expressed in big-endian order. After sending a GSS_GetMIC() or GSS_Wrap() token, the sender's sequence numbers SHALL be incremented by one. 4.2.2. Flags Field The "Flags" field is a one-octet integer used to indicate a set of attributes for the protected message. For example, one flag is allocated as the direction-indicator, thus preventing the acceptance of the same message sent back in the reverse direction by an adversary. Zhu, et al. Standards Track PAGE 9 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 The meanings of bits in this field (the least significant bit is bit 0) are as follows: Bit Name Description -------------------------------------------------------------- 0 SentByAcceptor When set, this flag indicates the sender is the context acceptor. When not set, it indicates the sender is the context initiator. 1 Sealed When set in Wrap tokens, this flag indicates confidentiality is provided for. It SHALL NOT be set in MIC tokens. 2 AcceptorSubkey A subkey asserted by the context acceptor is used to protect the message. The rest of available bits are reserved for future use and MUST be cleared. The receiver MUST ignore unknown flags. 4.2.3. EC Field The "EC" (Extra Count) field is a two-octet integer field expressed in big-endian order. In Wrap tokens with confidentiality, the EC field SHALL be used to encode the number of octets in the filler, as described in section 4.2.4. In Wrap tokens without confidentiality, the EC field SHALL be used to encode the number of octets in the trailing checksum, as described in section 4.2.4. 4.2.4. Encryption and Checksum Operations The encryption algorithms defined by the crypto profiles provide for integrity protection [RFC 3961]. Therefore, no separate checksum is needed. The result of decryption can be longer than the original plaintext [RFC 3961] and the extra trailing octets are called "crypto-system residue" in this document. However, given the size of any plaintext data, one can always find a (possibly larger) size, such that when padding the to-be-encrypted text to that size, there will be no crypto-system residue added [RFC 3961]. In Wrap tokens that provide for confidentiality, the first 16 octets of the Wrap token (the "header", as defined in section 4.2.6), SHALL be appended to the plaintext data before encryption. Filler octets MAY be inserted between the plaintext data and the "header." The Zhu, et al. Standards Track PAGE 10 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 values and size of the filler octets are chosen by implementations, such that there SHALL be no crypto-system residue present after the decryption. The resulting Wrap token is {"header" | encrypt(plaintext-data | filler | "header")}, where encrypt() is the encryption operation (which provides for integrity protection) defined in the crypto profile [RFC 3961], and the RRC field (as defined in section 4.2.5) in the to-be-encrypted header contains the hex value 00 00. In Wrap tokens that do not provide for confidentiality, the checksum SHALL be calculated first over the to-be-signed plaintext data, and then over the first 16 octets of the Wrap token (the "header", as defined in section 4.2.6). Both the EC field and the RRC field in the token header SHALL be filled with zeroes for the purpose of calculating the checksum. The resulting Wrap token is {"header" | plaintext-data | get_mic(plaintext-data | "header")}, where get_mic() is the checksum operation for the required checksum mechanism of the chosen encryption mechanism defined in the crypto profile [RFC 3961]. The parameters for the key and the cipher-state in the encrypt() and get_mic() operations have been omitted for brevity. For MIC tokens, the checksum SHALL be calculated as follows: the checksum operation is calculated first over the to-be-signed plaintext data, and then over the first 16 octets of the MIC token, where the checksum mechanism is the required checksum mechanism of the chosen encryption mechanism defined in the crypto profile [RFC 3961]. The resulting Wrap and MIC tokens bind the data to the token header, including the sequence number and the direction indicator. 4.2.5. RRC Field The "RRC" (Right Rotation Count) field in Wrap tokens is added to allow the data to be encrypted in-place by existing SSPI (Security Service Provider Interface) [SSPI] applications that do not provide an additional buffer for the trailer (the cipher text after the in- place-encrypted data) in addition to the buffer for the header (the cipher text before the in-place-encrypted data). Excluding the first 16 octets of the token header, the resulting Wrap token in the previous section is rotated to the right by "RRC" octets. The net result is that "RRC" octets of trailing octets are moved toward the header. Consider the following as an example of this rotation operation: Assume that the RRC value is 3 and the token before the rotation is {"header" | aa | bb | cc | dd | ee | ff | gg | hh}. The token after Zhu, et al. Standards Track PAGE 11 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 rotation would be {"header" | ff | gg | hh | aa | bb | cc | dd | ee }, where {aa | bb | cc |...| hh} would be used to indicate the octet sequence. The RRC field is expressed as a two-octet integer in big-endian order. The rotation count value is chosen by the sender based on implementation details. The receiver MUST be able to interpret all possible rotation count values, including rotation counts greater than the length of the token. 4.2.6. Message Layouts Per-message tokens start with a two-octet token identifier (TOK_ID) field, expressed in big-endian order. These tokens are defined separately in the following sub-sections. 4.2.6.1. MIC Tokens Use of the GSS_GetMIC() call yields a token (referred as the MIC token in this document), separate from the user data being protected, which can be used to verify the integrity of that data as received. The token has the following format: Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_GetMIC() contain the hex value 04 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3..7 Filler Contains five octets of hex value FF. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last SGN_CKSUM Checksum of the "to-be-signed" data and octet 0..15, as described in section 4.2.4. The Filler field is included in the checksum calculation for simplicity. Zhu, et al. Standards Track PAGE 12 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 4.2.6.2. Wrap Tokens Use of the GSS_Wrap() call yields a token (referred as the Wrap token in this document), which consists of a descriptive header, followed by a body portion that contains either the input user data in plaintext concatenated with the checksum, or the input user data encrypted. The GSS_Wrap() token SHALL have the following format: Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_Wrap() contain the hex value 05 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3 Filler Contains the hex value FF. 4..5 EC Contains the "extra count" field, in big- endian order as described in section 4.2.3. 6..7 RRC Contains the "right rotation count" in big- endian order, as described in section 4.2.5. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last Data Encrypted data for Wrap tokens with confidentiality, or plaintext data followed by the checksum for Wrap tokens without confidentiality, as described in section 4.2.4. 4.3. Context Deletion Tokens Context deletion tokens are empty in this mechanism. Both peers to a security context invoke GSS_Delete_sec_context() [RFC 2743] independently, passing a null output_context_token buffer to indicate that no context_token is required. Implementations of GSS_Delete_sec_context() should delete relevant locally-stored context information. 4.4. Token Identifier Assignment Considerations Token identifiers (TOK_ID) from 0x60 0x00 through 0x60 0xFF inclusive are reserved and SHALL NOT be assigned. Thus, by examining the first two octets of a token, one can tell unambiguously if it is wrapped with the generic GSS-API token framing. Zhu, et al. Standards Track PAGE 13 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 5. Parameter Definitions This section defines parameter values used by the Kerberos V5 GSS-API mechanism. It defines interface elements that support portability, and assumes use of C language bindings per [RFC 2744]. 5.1. Minor Status Codes This section recommends common symbolic names for minor_status values to be returned by the Kerberos V5 GSS-API mechanism. Use of these definitions will enable independent implementers to enhance application portability across different implementations of the mechanism defined in this specification. (In all cases, implementations of GSS_Display_status() will enable callers to convert minor_status indicators to text representations.) Each implementation should make available, through include files or other means, a facility to translate these symbolic names into the concrete values that a particular GSS-API implementation uses to represent the minor_status values specified in this section. This list may grow over time and the need for additional minor_status codes, specific to particular implementations, may arise. However, it is recommended that implementations should return a minor_status value as defined on a mechanism-wide basis within this section when that code accurately represents reportable status rather than using a separate, implementation-defined code. 5.1.1. Non-Kerberos-specific Codes GSS_KRB5_S_G_BAD_SERVICE_NAME /* "No @ in SERVICE-NAME name string" */ GSS_KRB5_S_G_BAD_STRING_UID /* "STRING-UID-NAME contains nondigits" */ GSS_KRB5_S_G_NOUSER /* "UID does not resolve to username" */ GSS_KRB5_S_G_VALIDATE_FAILED /* "Validation error" */ GSS_KRB5_S_G_BUFFER_ALLOC /* "Couldn't allocate gss_buffer_t data" */ GSS_KRB5_S_G_BAD_MSG_CTX /* "Message context invalid" */ GSS_KRB5_S_G_WRONG_SIZE /* "Buffer is the wrong size" */ GSS_KRB5_S_G_BAD_USAGE /* "Credential usage type is unknown" */ GSS_KRB5_S_G_UNKNOWN_QOP /* "Unknown quality of protection specified" */ Zhu, et al. Standards Track PAGE 14 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 5.1.2. Kerberos-specific Codes GSS_KRB5_S_KG_CCACHE_NOMATCH /* "Client principal in credentials does not match specified name" */ GSS_KRB5_S_KG_KEYTAB_NOMATCH /* "No key available for specified service principal" */ GSS_KRB5_S_KG_TGT_MISSING /* "No Kerberos ticket-granting ticket available" */ GSS_KRB5_S_KG_NO_SUBKEY /* "Authenticator has no subkey" */ GSS_KRB5_S_KG_CONTEXT_ESTABLISHED /* "Context is already fully established" */ GSS_KRB5_S_KG_BAD_SIGN_TYPE /* "Unknown signature type in token" */ GSS_KRB5_S_KG_BAD_LENGTH /* "Invalid field length in token" */ GSS_KRB5_S_KG_CTX_INCOMPLETE /* "Attempt to use incomplete security context" */ 5.2. Buffer Sizes All implementations of this specification MUST be capable of accepting buffers of at least 16K octets as input to GSS_GetMIC(), GSS_VerifyMIC(), and GSS_Wrap(). They MUST also be capable of accepting the output_token generated by GSS_Wrap() for a 16K octet input buffer as input to GSS_Unwrap(). Implementations SHOULD support 64K octet input buffers, and MAY support even larger input buffer sizes. 6. Backwards Compatibility Considerations The new token formats defined in this document will only be recognized by new implementations. To address this, implementations can always use the explicit sign or seal algorithm in [RFC 1964] when the key type corresponds to not "newer" enctypes. As an alternative, one might retry sending the message with the sign or seal algorithm explicitly defined as in [RFC 1964]. However, this would require either the use of a mechanism such as [RFC 2478] to securely negotiate the method, or the use of an out-of-band mechanism to choose the appropriate mechanism. For this reason, it is RECOMMENDED that the new token formats defined in this document SHOULD be used only if both peers are known to support the new mechanism during context negotiation because of, for example, the use of "new" enctypes. Zhu, et al. Standards Track PAGE 15 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 GSS_Unwrap() or GSS_VerifyMIC() can process a message token as follows: it can look at the first octet of the token header, and if it is 0x60, then the token must carry the generic GSS-API pseudo ASN.1 framing. Otherwise, the first two octets of the token contain the TOK_ID that uniquely identify the token message format. 7. Security Considerations Channel bindings are validated by the acceptor. The acceptor can ignore the channel bindings restriction supplied by the initiator and carried in the authenticator checksum, if (1) channel bindings are not used by GSS_Accept_sec_context [RFC 2743], and (2) the acceptor does not prove to the initiator that it has the same channel bindings as the initiator (even if the client requested mutual authentication). This limitation should be considered by designers of applications that would use channel bindings, whether to limit the use of GSS-API contexts to nodes with specific network addresses, to authenticate other established, secure channels using Kerberos Version 5, or for any other purpose. Session key types are selected by the KDC. Under the current mechanism, no negotiation of algorithm types occurs, so server-side (acceptor) implementations cannot request that clients not use algorithm types not understood by the server. However, administrators can control what enctypes can be used for session keys for this mechanism by controlling the set of the ticket session key enctypes which the KDC is willing to use in tickets for a given acceptor principal. Therefore, the KDC could be given the task of limiting session keys for a given service to types actually supported by the Kerberos and GSSAPI software on the server. This has a drawback for cases in which a service principal name is used for both GSSAPI-based and non-GSSAPI-based communication (most notably the "host" service key), if the GSSAPI implementation does not understand (for example) AES [RFC 3962], but the Kerberos implementation does. This means that AES session keys cannot be issued for that service principal, which keeps the protection of non-GSSAPI services weaker than necessary. KDC administrators desiring to limit the session key types to support interoperability with such GSSAPI implementations should carefully weigh the reduction in protection offered by such mechanisms against the benefits of interoperability. Zhu, et al. Standards Track PAGE 16 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 8. Acknowledgements Ken Raeburn and Nicolas Williams corrected many of our errors in the use of generic profiles and were instrumental in the creation of this document. The text for security considerations was contributed by Nicolas Williams and Ken Raeburn. Sam Hartman and Ken Raeburn suggested the "floating trailer" idea, namely the encoding of the RRC field. Sam Hartman and Nicolas Williams recommended the replacing our earlier key derivation function for directional keys with different key usage numbers for each direction as well as retaining the directional bit for maximum compatibility. Paul Leach provided numerous suggestions and comments. Scott Field, Richard Ward, Dan Simon, Kevin Damour, and Simon Josefsson also provided valuable inputs on this document. Jeffrey Hutzelman provided comments and clarifications for the text related to the channel bindings. Jeffrey Hutzelman and Russ Housley suggested many editorial changes. Luke Howard provided implementations of this document for the Heimdal code base, and helped inter-operability testing with the Microsoft code base, together with Love Hornquist Astrand. These experiments formed the basis of this document. Martin Rex provided suggestions of TOK_ID assignment recommendations, thus the token tagging in this document is unambiguous if the token is wrapped with the pseudo ASN.1 header. John Linn wrote the original Kerberos Version 5 mechanism specification [RFC 1964], of which some text has been retained. Zhu, et al. Standards Track PAGE 17 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 9. References 9.1. Normative References [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC 2743] Linn, J., "Generic Security Service Application Program Interface Version 2, Update 1", RFC 2743, January 2000. [RFC 2744] Wray, J., "Generic Security Service API Version 2: C-bindings", RFC 2744, January 2000. [RFC 1964] Linn, J., "The Kerberos Version 5 GSS-API Mechanism", RFC 1964, June 1996. [RFC 3961] Raeburn, K., "Encryption and Checksum Specifications for Kerberos 5", RFC 3961, February 2005. [RFC 4120] Neuman, C., Yu, T., Hartman, S., and K. Raeburn, "The Kerberos Network Authentication Service (V5)", RFC 4120, July 2005. 9.2. Informative References [SSPI] Leach, P., "Security Service Provider Interface", Microsoft Developer Network (MSDN), April 2003. [RFC 3962] Raeburn, K., "Advanced Encryption Standard (AES) Encryption for Kerberos 5", RFC 3962, February 2005. [RFC 2478] Baize, E. and D. Pinkas, "The Simple and Protected GSS-API Negotiation Mechanism", RFC 2478, December 1998. Zhu, et al. Standards Track PAGE 18 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 Authors' Addresses Larry Zhu One Microsoft Way Redmond, WA 98052 - USA EMail: LZhu@microsoft.com Karthik Jaganathan One Microsoft Way Redmond, WA 98052 - USA EMail: karthikj@microsoft.com Sam Hartman Massachusetts Institute of Technology 77 Massachusetts Avenue Cambridge, MA 02139 - USA EMail: hartmans-ietf@mit.edu Zhu, et al. Standards Track PAGE 19 top

RFC 4121 Kerberos Version 5 GSS-API July 2005 Full Copyright Statement Copyright © The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Zhu, et al. Standards Track PAGE 20 top

The Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Mechanism: Version 2 RFC TOTAL SIZE: 43945 bytes PUBLICATION DATE: Thursday, July 14th, 2005 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 4121: The IETF Trust, Thursday, July 14th, 2005
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement